i love skibidi toilet (what is a digital footprint)
@seykbsАй бұрын
rinneneko so good
@roverboy2111Ай бұрын
and to think i was gonna sell it </3
@alanvthai2 ай бұрын
nice, which do you like better in this config?
@roverboy21112 ай бұрын
@@alanvthai honestly, pbt sounds a lot nice irl. i love clack but that sound with the pbt speaks to me. abs also just sounds really bad with it but when using other switches, abs sounds a lot better in this keyboard
@polynotgone83492 ай бұрын
clears so good
@roverboy21112 ай бұрын
They were my favourite tactile until i finally use mx browns, the light tactility when lubed correctly is god tier
@xv_ma2 ай бұрын
where pokeman
@roverboy21112 ай бұрын
It’ll be in the next video, trust me
@ArminPC_Windows2 ай бұрын
Hi I Subscribed To You Hopefully You Become A Popular KZbinr Since You Make Good Content W Vid 😁
@roverboy21112 ай бұрын
@@ArminPC_Windows Thank you man
@xv_ma2 ай бұрын
where pokeman
@roverboy21112 ай бұрын
pokeman on other keyboard
@SfsultamateGamer2 ай бұрын
! Over 80% of your system memory is used
@roverboy21112 ай бұрын
Yea this is when i had a somewhat bad pc, it’s gotten better recently
@SfsultamateGamer2 ай бұрын
@@roverboy2111 beaming is a memory intensive game
@SfsultamateGamer2 ай бұрын
My laptop (surface pro 4 16 gb ram) gets that
@roverboy21112 ай бұрын
@@SfsultamateGamer yea it was when i had 16gb of ram, i’ve got 32 now and i don’t think that’s appeared in a while
@bluejaysakko2 ай бұрын
creamme
@Hazza_box_83 ай бұрын
What game is this
@roverboy21113 ай бұрын
BeamNG
@uKnowWhoChannel3 ай бұрын
creamy...
@roverboy21113 ай бұрын
i like it creamy 😩
@uKnowWhoChannel3 ай бұрын
@@roverboy2111 mmmmm
@xv_ma3 ай бұрын
pokeman
@roverboy21113 ай бұрын
smash
@TimeGxne4 ай бұрын
put those fingers somewhere more important 😉
@roverboy21114 ай бұрын
I will bbg dont you worry
@Jelly_keebs5 ай бұрын
Should I buy akko v3 pro yellows for a slightly higher price or should I buy these smoothies? I’m using gmk67 👍 love the build btw sounds incredible
@roverboy21115 ай бұрын
i’ve had good experiences with akko and gateron but these switches are way above the price range but i’ve never used the akkos so it’s your choice
@roverboy21115 ай бұрын
I don't know why it's such bad quality, I'll try and fix it on the next one.
@Disabled_Toad6 ай бұрын
Why is the space bar the other way around. Other than that, such a clean build. :)
@roverboy21116 ай бұрын
Its more comfortable for my hands since they are small and with the way i type, try it, might feel better for you depending on how you type
@Disabled_Toad6 ай бұрын
@@roverboy2111 That's a fair point just looks odd thats all, clean build tho :)
@__entiendo6 ай бұрын
Damn this is such a good build
@roverboy21116 ай бұрын
Yea the switches really pull it all together in all honesty
@toastyfresh97866 ай бұрын
What are the keycaps called
@roverboy21116 ай бұрын
They are GMK Laser from Drop.com, they are based in america but ship to most of the world im sure.
@ikki34306 ай бұрын
I dont know which one to get, G Pro 3.0 Yellow or the Smoothie, never tried a switch besides Red lol
@roverboy21116 ай бұрын
Id recommend to get some switch samples, if you are based in the uk, mechbox is a great place for samples but if you like the standard range of normal switches then get g pro yellows but if you like long poles, get the smoothies
@georgepierre35946 ай бұрын
Both are top notch switches. I believe the yellow is a bit more muted than these.
@shaade7276 ай бұрын
bakeneko or a custom?
@roverboy21116 ай бұрын
Technically a custom made by someone else and sold to me but uses the same style of case as a bakeneko just with a brass weight on the bottom
@Chonkkey.boards7 ай бұрын
woahh sounds so good
@roverboy21117 ай бұрын
Thank you, ill try to make more with this keyboard but the silent switches (in my most recent video) sound and don't sound amazing to me at the same time, I think im slowly delving into topre
@crystalphantasm7 ай бұрын
bruh that thing with the rgb turned on looks straight up like a $20 gaming keyboard. but i guess you can call this a sleeper keyboard lol
@roverboy21117 ай бұрын
It does look like a gamer keyboard but it’s mainly just to show how bright it is with these switches, normally just have it react when I’m typing or off.
@MangoTangoFox7 ай бұрын
I LOVE the stock feel and sound of these, muted-top out but super sharp and satisfying bottom-out... I have run into a problem however... the factory lube is also on the pole which is partly why the top-out is slower and nicely muted... but over time it tends to seep down and get on the bottom of the long-pole, completely ruining the clacky bottom-out. You can clean the pole/hole fixing the nice bottom-out, but with no lube in there at all the top-out is a lot louder and more abrasive... It's a really fine balance and the stock oil they used doesn't stay in place. A tiny swirl of kyrtox at the top of the hole can return them to stock, but I'm not sure yet if that seep down the same way. I'm still insanely satisfied for the 16 cents a switch I paid for these... that's just crazy, even if they need some work.
@roverboy21117 ай бұрын
Not encountered this problem as of far but still, for the cheap price, its justifiable considering the cost of them though in my opinion. Still a great switch and will probably be using them for the time being.
@marshallmaia81307 ай бұрын
I made the mistake of overlubing these switches and had to clean it off and relube but even that was still too much so I cleaned it off again and just use it unlubed. Sounds nice and clacky but it doesn't have that slow, satisfying top out anymore.
@roverboy21117 ай бұрын
@@marshallmaia8130 Tbf I've just been using these stock (no idea if there is applied lube on them) and they sound nice and smooth either way and I'm using them in my zoom65 right now, might make a video showing how its the keyboard that changes the sound the most and not the switch for new people.
@marshallmaia81307 ай бұрын
@@roverboy2111 Ya they're lightly pre lubed just on the rails of the stem I think
@Marder_IFV7 ай бұрын
Makes me wanna play beam again
@ansonnoob7 ай бұрын
This thing is on my recommendation, so I think KZbin did a great job
@offbrandbiscuit8 ай бұрын
If these are really full POM, these turned out pretty well especially for stock.
@roverboy21118 ай бұрын
I think the main thing is that they have factory lube on which really helps
@xxcridonxx76148 ай бұрын
Have some I’m waiting to put in my Bauer lite when it ships. Lemme tell u, these things are smooth. 10x smoother than my broken in, spring swapped and lubed nk creams. I hate my creams compared to these. They’re nk cream killers for less than half the price. The factory Lubing on these are good, no spring ping either as all of my factory lubed gateron switches I’ve tried come with lubed springs. These are amazing stock. Honestly, if gateron went to sell these for 75 cents a switch, i wouldn’t batt an eye. They’re just as smooth as my gateron Luciolas and cream sodas (but slightly less smooth than cj’s which are polished in the factory)
@kennanfattah14688 ай бұрын
it sounds so premium tho ❤❤ do you use any foams on it?
@roverboy21118 ай бұрын
Nope, no foams whatsoever. Just sounds that good
@Serajiman8 ай бұрын
Sounds epic. Really glad this went to a good home! :)
@roverboy21118 ай бұрын
Thanks lol, fancy seeing you here love the board so much <3
@roshonchildress14328 ай бұрын
you derveers more covmendfiew
@roverboy21118 ай бұрын
Thank you lol
@ChocoMuffin238 ай бұрын
First ever click sounding keyboard that aren't 'clicky' switches wtfff so good
@roverboy21118 ай бұрын
They are honestly so nice and they are completely stock here which just adds that they are 30p per switch
@yanec25019 ай бұрын
I will admit the recording of this isn't perfect but MY GOD does it sound nice!!
@roverboy21119 ай бұрын
Yea I'm still tryna get the recording setup to be better just experimenting for now until I find something that works but I will agree, it does sound and feel really nice
@notyourordinaryappl39 ай бұрын
it would be nice if you can do a soundtest by changing the switch to mx black then. much appreciate
@uKnowWhoChannel Жыл бұрын
your cat is fat
@spriggan7363 Жыл бұрын
may I ask where can I buy the alu plate for the tiger80 lite? Thank you!
@roverboy2111 Жыл бұрын
I got mine from someone on a discord server but you can get them for under £20 from places like aliexpress last time i checked.
@Concorde2003-I6 Жыл бұрын
Blud thinks hes need for speed
@uKnowWhoChannel Жыл бұрын
Blud thinks hes entitled to an opinion
@patiszejuicebox Жыл бұрын
Out of curiosity: With the alu plate, do you have the gaskets on the mounting tab nearest to the spacebar? I found with the Tiger Lite that the spacebar feels choked and dead sounding with stiffer materials for the plate. I have an alu plate for my light as well, and taking off the gaskets allowed for my life and resonance on my spacebar.
@roverboy2111 Жыл бұрын
For this video I did but I think I reapplied them as with a BCP on the space bar and gmk space bar it sound much more cleaner to my ears