I did mine that way the only problem was taking the hoses off love the video thanks
@Jonhy_fixАй бұрын
Good to hear that 🎉 Yes I know those hoses are hard to remove
@angelcuev67622 ай бұрын
Genius 😂👏
@stephenhans1894 ай бұрын
No one removes the bed . They remove the tank underneath . U truck no gooy now .
@alexanaya1134 ай бұрын
Awesome 🎉
@davidberry78524 ай бұрын
I have a 2014 ford f150 king cab I did not see fuel pump im bed of truck i just saw the fill. Up hose green part to tank ca it bw in the Back seet
@Jonhy_fix4 ай бұрын
Hey hello David, what a good question, take a look under the back seat, or even take a look under the truck around the back doors and see if you can see the tank. The location depends on what kind of cabin you got.
@colbycline2025 ай бұрын
Bro, keep it simple. This is for sure what I am doing instead of spending $1000 in the shop.
@Jonhy_fix4 ай бұрын
Yes for sure brotha, most of the shops are overpriced and sometimes is not good just spend money if there is no reason. Good luck and be safe!
@mrmacon20105 ай бұрын
I’m replacing mine this weekend thanks for the Video
@Jonhy_fix4 ай бұрын
Glad I could help thank you be safe and good luck 👍
@Jonhy_fix6 ай бұрын
Thank you all! If you liked this video, please subscribe to this channel! 🙏
@donaldjenkins79236 ай бұрын
Hey Johnny will this process work on a 2004 extended cab?
@Jonhy_fix6 ай бұрын
Well, it’s a good question dear viewer. The best way to know that is if you take a look under the bed. Go to the driver side in the rear wheel and use a lamp to see if you can see the tank, if you can see it then you can use this method.
@heresteven7 ай бұрын
I think I will try this. My 2004 F150 is only worth $2000 blue book value. A fuel pump replacement is $1000 at a shop.
@Jonhy_fix6 ай бұрын
Wooow that’s too low. You can try it just be safe with the grinder. Please share with us the process.
@MatteoTodd7 ай бұрын
Ty. What’s the part number?
@Bondo008247 ай бұрын
How did you determine where to cut.
@Jonhy_fix6 ай бұрын
Good question. If you go to the top of the bed you can see four bolts in every corner so what I did was take a look under the bed to see if we have enough room to make the hole.
@gabiladarlington14569 ай бұрын
Very educative keep up with the good work sir
@Jonhy_fix8 ай бұрын
Yes sir thank you very much
@rockboy60010 ай бұрын
Will nor work for a 2001 Ford F150. The dimensions for cutting the hole are off. The bed should be cut directly to the back of the cab (no 2-3/4" gap). Also the is a large part of the bed frame that is directly over the pump in the tank. Cutting torch can't help, too close to the gas tank.
@Jonhy_fix10 ай бұрын
Good to know thanks for the info.
@NCKNIGHT4U Жыл бұрын
Now I can get my late fatther truck fix... thank You!!!
@Jonhy_fix Жыл бұрын
Glad to help
@kevindobbins-callahan4995 Жыл бұрын
Thanks dude
@Jonhy_fix Жыл бұрын
Happy to help
@nicolestephens1690 Жыл бұрын
Thank you!!
@Jonhy_fix Жыл бұрын
You're welcome!
@Vanessa.305 Жыл бұрын
Thank you so much!!!
@Jonhy_fix Жыл бұрын
You're welcome!
@danp74632 жыл бұрын
That's how I'm going to change my fuel pump on my F-150.
@Jonhy_fix Жыл бұрын
Let me know if you need a hand with that 👍
@Grzvity2 жыл бұрын
Do I NEED to empty the old coolant? I saw another video, and the guy said you have to drain it then “bleed” it when putting more coolant back in. It wouldn’t be a problem if I simply swapped the tank, and filled it with more coolant right
@Jonhy_fix2 жыл бұрын
Hi, thanks for share your question with me. Well it’s up to you. If your coolant is still young you can use the same one only you have to refill the reservoir tank. Remember the coolant is for 10 years. Make a quick test, take a little coolant from your radiator and put it into a cup then leave it in the freezer all night if does not get freeze for sure you can still using the same coolant. If not you have to change the coolant.
@mikebouie732 жыл бұрын
How about the 5.4 2005
@Jonhy_fix2 жыл бұрын
I’m sorry but the 5.4 is different.
@mikebouie732 жыл бұрын
@@Jonhy_fix is it in a Different location
@pauch1ckaw0w72 жыл бұрын
was easy... thankyou!
@Jonhy_fix2 жыл бұрын
I like to hear that! Thank you 🙏
@osyrys_yt2 жыл бұрын
Sweet hopefully this fixes my coolant leak issue
@Jonhy_fix2 жыл бұрын
Thanks for see this video and good luck 👍
@jenflink99542 жыл бұрын
Question please...can you help me?? My husband owns a 2015 Ford focus. The coolant reservoir cap broke so he bought a new one, but while changing it the little hose in the front on the left the clip broke. Does it have a name so I can look it up to purchase. Please and thank you.
@Jonhy_fix2 жыл бұрын
Hello thanks for see this video. This is the name of the part you looking for. Upper Expansion Tank Hose - 2013-2018 Ford Focus You can get it on the dealer or autozone or maybe for less money on ebay. If you need something else please let me know.
@mejhon6592 Жыл бұрын
Did you change all the hose, or you change just the clip?
@mejhon6592 Жыл бұрын
@@Jonhy_fixif i lost the ring and the dubver band in the middle form the hose do i need to buy all new hose?
@troybarzilla2 жыл бұрын
Man you are brave
@Jonhy_fix2 жыл бұрын
Thanks bro
@Ur2ez4me812 жыл бұрын
Can’t believe the dealership wanted over $300.00 to replace this smh it literally only takes 10-15 minutes to do & the part is $50.00. Ridiculous!
@Jonhy_fix2 жыл бұрын
Save money with this little project. Go and get some beers play good jams and get it done 👍
@keithwarkentin2 жыл бұрын
You know what I forgot to tell you my truck is a four door but my rear doors are li 1/3 of the size of the driver and passenger doors are I guess that maybe a problem eh?
@Jonhy_fix2 жыл бұрын
Sorry but it will not be on the same place. The four door is different.
@keithwarkentin2 жыл бұрын
@@Jonhy_fix Thanks I will see if I can get under it and figure it out I appreciate you getting back to me 👍
@keithwarkentin2 жыл бұрын
Would those measurements be the same for a 2007 F150 4.2l two wheel drive? I always wanted to make a door with a cutting wheel but was always scared of going two deep but what you showed there’s lots of room! Very good video!
@Jonhy_fix2 жыл бұрын
Hey thanks for comment this video. I’m not sure but I’ll go and check it out and I’ll let you know 👍
@abdinurelm35512 жыл бұрын
Thanks
@Jonhy_fix2 жыл бұрын
Welcome!!
@AChocolateStarr2 жыл бұрын
My thin vacuum hose split one day when I was moving it to get to something else.. I patched it up thickly with some silicon sealant tape that auto zone recommended. Thankfully I was parked right outside of the store when it happened. Car has ran fine for a few months and now it's leaking coolant every few days below minimum. How do I replace the thin hose running from the tank to the engine? I'm going to replace the tank as well using this video's instructions. Ty!
@Jonhy_fix2 жыл бұрын
Hello thanks for comment this video. If you are going to replace the tank and the thin hose. Get both pieces on amazon or ebay. Autozone sell parts in expensive prices. The thin line is easy. After you remove the plug from the tank go and follow it until the end close to the engine. There is a hose clamp only what you have to do is press the clamp and pull it back and there is. With the clamp out just pull the hose out and install the new one. If you need something else please let me know. 👍
@frankmontez68532 жыл бұрын
YAy !! Did and refilled it with universal coolant . Took it for a spin and levl stayed good . I'll keep checking it . Some say use spicific coolant but for now use universal .
@Jonhy_fix2 жыл бұрын
That’s great brotha. You can use the green one 50% coolant and 50% water. keep letting us know what is happening 👍
@frankmontez68532 жыл бұрын
Yeah have small slow leak which I think I've found where . A lil wet spot at that thin line coming from reservoir tank . .. 2016 Focus SE . Yeah American 2.0L . So replace what exactly ? Both tank and line ? And just below looks like water stained on motor mount .
@Jonhy_fix2 жыл бұрын
Replace the reservoir tank. You can get it on amazon for 25 bucks. And replace both lines. You can get them on ebay for 15 bucks. Sometimes when you have a leak on the tank the pressure is higher than normal and maybe that’s why your lines are broke.
@rickyrickharris49082 жыл бұрын
Hey i liked your video . Do you know if the 2004 will be in the same place?
@Jonhy_fix2 жыл бұрын
Yeah just make sure this is the extended cab 4.6 v8. Go to the rear wheel (driver side) under the bed and use your camera to see the tank with the lines.
@hannahmartinak26962 жыл бұрын
Thank you for this video!!! Just replaced mine by myself after watching this!!!
@Jonhy_fix2 жыл бұрын
I like to hear that. Thank you for see the video.
@mattcarter28682 жыл бұрын
Thank you so much, you saved me a lot of money
@Jonhy_fix2 жыл бұрын
Thank you for see the video 👍
@halminteljr58703 жыл бұрын
Thank you for the video
@Jonhy_fix3 жыл бұрын
thank you for see the video. 👍
@umairbaig48893 жыл бұрын
Thank you 🙏 you helped me fix my coolant leak.
@Jonhy_fix3 жыл бұрын
Thank you for see the video. I like to hear that 👍
@adrftgvvbh3 жыл бұрын
Bro lol best video iv ever seen. Thank you
@Jonhy_fix3 жыл бұрын
Thank you for comment and see the video brothaaa 👍
@claudiasolis45503 жыл бұрын
Can I make the hole with a plasma cutter?
@Jonhy_fix3 жыл бұрын
Do it with a grinder and a cutting wheel and you get better results. 👍