Am I the only one who saw him drop the plugs into the holes after stating NOT to?

Thank you for posting this super helpful video! Used this to help fix my flat by myself on the highway this morning. Easy Peasy! As they say, “BE A MAN!” 😂

Good explanation and video demonstration.

Thanks. Every step worked awesome on my 2009 Corolla.

Just to point this out. The halogen bulb connector that faces down to 6 o’clock is great for all in one led bulbs because the orientation is an automatic good, to face the led chips left and right. The 9005 high beam has that same issue like mine. If those have an angle as shown on the video, u need a led bulb with an adjustable collar, to fix the orientation correctly. That’s what I hate about mine. My 2015 lifted Scion xB has that. So I have Lasfit - LD plus switchback H11 with easily nice orientation. Since my halogen bulb that’s 9005, it’s off angle. So I use Lasfit - LA plus 9005 high beam with a 360 adjustable collar. To fix the orientation correctly, and have the brightest hotspot as possible, so u can aim the light output way further down the road more. That’s the most important thing. And plus for just being subjective, it looks sharp when it lines up the reflector housing and it looks elegant.

How did d thry hold up

The foot technique worked

My socket us stuck inside

Don't drop it!

Thnx b0ss

10/10

Loosen and brake cap. Clean and grease, bleed the brakes, and pump the brakes..

I just want to add another important thing. Wear a face mask since the brake pad contains asbestos. It can causes lung cancer or mesothelioma.

Quick and easy thank you man!

Interesting comparison of the halogen's delayed responsiveness versus the LED's much quicker response. Great stuff!

W video. Popped my tire yesterday and your video helped a lot. First time changing my tire too

Thanks man! Doing my own DIY grill on my 06 Ford Focus and want to see how I would attach it or in better words get a idea. Only thing is that you should be in a well ventilation area when doing the plastic welds. I would keep a fan to help blow the smoke away from you if you do this again.

To, co si předvedl v tomto videu je absolutní zoufalost a amaterismus. 1. pojízdným zvedákem se NIKDY nezvedá auto za práh, protože hrozí jeho poškození. 2. brzdový kotouče se z náboje nesundává kladivem, nýbrž pomocí šroubů, které se zašroubují do otvorů na kotouči k tomu určených. Postupným utahováním šroubů dojde ke stažení kotouče. Tak jak si to udělal ty hrozí poškození ložiska. 3. Brzdový kotouč se musí před montáží očistit a odmastit. Je to bezpodmínečně nutné pro správný brzdný účinek. 4. Kluzné plochy, kde se pohybují brzdové destičky se musí namazat speciální keramickou pastou, aby nedocházelo k jejich zadrhávání. Nevím, proč točíš videa o opravách aut, když tomu vůbec nerozumíš.

great video very clear instruction i like thanks

One watch and i was able to do it on my own, thanks!

When you said if the slide pins were not working get creative and pound on it with a hammer i actually laughed out loud! Seriously people dont ever do that , try to get the pins out using heat if they are seized

They’re failed…? No..! 😨😨😨😰😰

Where did you get the tool to remove the oil filter? I'm having trouble removing it =/

THANK YOU

3:33 …always clean the hub with a wire brush and smear a little copper grease around the inner part close to the wheel bearing cap.

Great vid, thanks!

good tutorial. man it was hard to endure that loud elevator music though. :/).

I only put in 5 liters

Wait a minute... It's this simple and they want to charge me 90 bucks at the dealer? Let alone wait 2-3 hours

Excellent Job and the video was pretty funny how easy you made it

How much oil did you add? I hear 5.8 quarts is too much

Do not just drop the spark plug in.

Thanks for making this, super easy to follow along!

did this one a rental car; worried that there is quite a large gap for the lug nuts between where the tip is solid and where the top is and wasn't close to flush; i.e. the washer is moving and doesn't look that solid of a connection. do you remember if your's also had that?

Replacing the tires on my 2018 Corolla SE. To replace it with the ones on their now from the dealership (Firestone FR740) is $800-$1000. Any body got a suggestion for a good quality tire to purchase, that won't cost me an arm and a leg?

Thank you!

Do the spark plugs come premeasured, or do we still have to measure the gap and space it ourselves?

Jack is supposed to be centered on the raised lip just behind where you placed it and it’s 0-20 weight oil

Have you ever have Check Engine Light or Sensor pop up issues since you install the Cool air intake

Thanks for this video!! It was easy to follow. I was able to change my tire without second guessing if I was actually doing it right.

just did this and frogot to put the clips that clip to the brake pad on. Not the sliding retainer clips put the ones clipped onto the brake pad. What do they even do?

I ordered them but mine don’t have the cooling fan only the cooling fins… have you had good success with them?

The website says they don’t have any for the brz?

Bottom line question: Is there any horse power gains..??

Torque by foot? C'mon!!

Excellent! Clear and detailed explanation!

Always degrease and wipe the dirt/grime off around any opening that leads to engine, tranny, etc. Also, I would not drop the spark plug in like that if the drop is deep like that, if it lands off center, the impact could change the gap and even damage the plug.

I hate that nobody ever works on the 3.5 L v6.

Is it the same process as the v6 touring?

That air filter does not talk good about the owner