William Tromblay metal shaping

Пікірлер

@RonCovell 6 күн бұрын

Great content, Bill. I look forward to seeing how you control the massive shrinking needed on that part.

@jackpledger8118 6 күн бұрын

Interesting bottom die holder on your hammer. Could you please talk about it and what went into the design in a future video? Thanks.

@williamtromblay6795 15 сағат бұрын

Hi, On my list of things to do. Thanks for watching.

@davidbarbossa8857 6 күн бұрын

Great videos! Let’s hurry up and post that next video on how to deal with that problem 😀. Thanks for posting !!

@465maltbie 7 күн бұрын

What are you using for your lubricant that you sprayed on the part? Charles

@williamtromblay6795 15 сағат бұрын

Hi, I have tried a number of products and have settled on 1/2 ATF fluid and 1/2 Mineral spirits. McMaster Carr sells spray bottles that hold up well to chemicals, so the sprayer always works.

@465maltbie 15 сағат бұрын

@williamtromblay6795 thanks, that was dad's favorite recipe for everything. Ha ha

@trottermalone379 7 күн бұрын

Excellent!! Looking forward to your next installment! Can’t wait to see how you turn the radius.

@AlanVonSeggern 7 күн бұрын

That sure makes a case for a power hammer over a wheel for that part.

@kennethstaszak9990 7 күн бұрын

I didn't doubt you for a minute! The one thing about power hammers that strikes me as odd is the height of the anvil arm. It looks like it would give a guy shoulder problems and be tiring to hold your arms up so high all the time.

@williamtromblay6795 7 күн бұрын

Hi. I have mine higher than most. With the arm at that height, it easier to see through the die opening when stretching and not as far to pull down when shrinking larger panels. Thx for watching. B

@carolinasculpturestudio 7 күн бұрын

Very cool, Bill. Thanks for showing us how it’s done!

@stevemurphy402 8 күн бұрын

Thanks Bill, very interesting and some really good points were made. Cheers from down under.

@williamtromblay6795 7 күн бұрын

Glad you enjoyed it

@christracey7562 9 күн бұрын

Hi Bill .... another geat informative video ... can I ask what might be a dumb quesion .... Could you do the same in a pullmax using the die you had in the power hammer or would it damage the pullmax because its not really made for hammering? Cheers Chris.

@williamtromblay6795 9 күн бұрын

Hi, The concept will work just fine in a Pullmax and we are working on the same concept in a English wheel.

@STP6970 12 күн бұрын

Great knowledge thank you.

@STP6970 12 күн бұрын

Thank You. Very well spoken.

@CatskillMtnCustoms 12 күн бұрын

Well done Bill 👌

@williamtromblay6795 11 күн бұрын

Thanks

@STP6970 12 күн бұрын

Thank You for sharing your knowledge . I’m looking forward to watching all of your videos. Thanks

@williamtromblay6795 11 күн бұрын

Thanks for watching!

@haraldolsen5724 17 күн бұрын

Hi, it was interesting to hear you talk about this topic. Can you please let us know where to get hold of a copy of John Glover's The English Wheeling Machine, if it is still available?

@williamtromblay6795 11 күн бұрын

Hi, I think I got my copy of John Glovers book from Dagger Tools in MIchigan.

@ArcticxBeaver 21 күн бұрын

The apple is a nice touch

@williamtromblay6795 21 күн бұрын

;)

@mopidhul1 22 күн бұрын

I hope you are well. Visiting your channel I have seen your all videos and content are very good but your video SEO optimization is not professional. Perhaps you are busy for managing the channel

@vdubdude 22 күн бұрын

Bill, I learned by the "reading a book" way. That first book I read was from Ron Fournier back in the mid '80's when I was building race cars. I've been honing those skills ever since.You gotta start somewhere, and that's where my humble skills began. Keep it up.

@RonCovell 22 күн бұрын

Bill - thank you for another EXCELLENT video! You covered many fine points here, and I know many people will benefit.

@williamtromblay6795 22 күн бұрын

Thank you

@dresdensvo 23 күн бұрын

I find that utoob teaches procedeures , If thats all you learn ,when the situation changes that person cant diagnos and respond with a correction .

@GARRY-xv9me 23 күн бұрын

I think its funny how you have not shown us how to make any panels on your videos. But I think I have learned so much about metalshaping in a different way. I always look forward to your next video and contents .You are a fantastic communicator so please keep them coming .

@williamtromblay6795 22 күн бұрын

Glad it was helpful!

@midnighttutor 23 күн бұрын

Great presentation! Future content suggestion: how to minimize warping when tig welding rather large and relatively flat panels...sheet metal butt joints. With the given that you are never going to have a perfect fit up joint and may not be sitting at some nice giant table with everything jig'd up and a foot pedal in a convenient spot on the floor. And you probably won't have easy access to the back side after the weld is done. Thank you!

@williamtromblay6795 22 күн бұрын

Thank you for content idea, will see what I can do.

@midnighttutor 22 күн бұрын

@@williamtromblay6795 Thanks I think you probably have some very useful insights on something that I have been dealing with for a long time

@carolinasculpturestudio 23 күн бұрын

The video started running and my wife says “Hi Bill”. So do I. Great to see your video portfolio growing with such substantial & relevant content. Very, very cool. Thank you, Bill.

@williamtromblay6795 22 күн бұрын

Hi Clint, I always remember "choose your masters wisely". Say hi to your wife for me and thanks for watching. B

@carolinasculpturestudio 22 күн бұрын

@@williamtromblay6795 we missed seeing you at Jim’s last month. Life keeps happening. It’s great to see you helping other people grow, Bill. You have a special gift and it speaks volumes to see you sharing it with others. That’s real what Masters do. Very cool.

@williamtromblay6795 18 күн бұрын

@@carolinasculpturestudio Thank you my friend, stay in touch.

@bobg9873 23 күн бұрын

The apple was a nice touch... 😁

@williamtromblay6795 22 күн бұрын

Wasn't sure who would catch that, plus I had lunch 🤔 😊

@ndav8r 23 күн бұрын

...taking criticism is so key in learning. I recall years ago, my advanced photography class at a local State University, was taught in the 6 year Graduate of Brooks Institute from California. He had criticked my first photography assignment with a threatening failure, which made me toughen up, only to advance to be the only one in the class to "Ace" it. I will never forget that unforseen learning tool that is not in books...take criticsm!

@zymantasbucius8299 23 күн бұрын

Thank you.

@SheetMetalShaping 23 күн бұрын

Great video. Many true anecdotes in here. Keep up the great videos.

@Handbuilt1 23 күн бұрын

Extremely well spoken and so true . Well done William !! I think you will be a very good teacher

@williamtromblay6795 22 күн бұрын

Thank you

@christracey7562 23 күн бұрын

Wow, just brilliant explanation. Just gotta spend the time in the workshop now practicing what youve jsut passed on to see if I can get the results. As you say its not enough to just watch and learn but your video certainly makes it much more understandable. Keep them coming and cheers.

@williamtromblay6795 22 күн бұрын

Glad it was helpful!

@jackpledger8118 23 күн бұрын

Excellent advice Bill and much appreciated, You might consider covering what you would consider a good choice of initial equipment for someone just starting out in metal shaping for one of you videos. In my opinion some tools that are not too expensive but are absolutely necessary, while others may be very expensive but not absolutely necessary. It's very easy when just starting to put together a metal shaping shop to be overwhelmed by the rarity of some of the older machines seen in well equipped shops and their expense when found. We often assume that because these well equipped shops have these machines they are necessary when starting out. What do you think?

@williamtromblay6795 22 күн бұрын

Hi. I think it is a good idea, I will get some content together. Thx B

@huizdeeze1075 24 күн бұрын

my class is 10.000 per day, and i call my students idiots .

@motleymetals 24 күн бұрын

Another great video thank you.

@williamtromblay6795 22 күн бұрын

Glad you enjoyed it

@eddiemcg 24 күн бұрын

thanks again for another informative video William. could you though, tell us more about the Jim Heary (sp) metal meet? is it open to all shapers/students? cheers.

@williamtromblay6795 22 күн бұрын

Hi. The event is open to all levels of shapers. His event is always in laye August. I recommend you follow All Metal Shaping forum for future Metal meet event dates.

@petergardner7741 24 күн бұрын

Thanks Bill for a well delivered conversation on not only how to start out or improve metal shaping skills and knowledge but how to be a decent human being while doing it. I personally have to rely on books and “KZbin University “ as living in Perth, Western Australia we are regarded as the most remote capital city on earth and metal shaping tuition is not plentiful, travel to other parts of the world to find it is costly. So when I find a channel like yours with tuitions and conversations delivered by someone with your technical knowledge I’m sitting up and paying close attention to the teacher.

@JimPetrykowski 24 күн бұрын

Once again, a HUGE thank you for all your efforts, talent, and communication ! Excellent ps . . . the format of"school" with resource books and an apple for the teacher was classic!! thanks again.

@williamtromblay6795 22 күн бұрын

Your welcome, I was curious who would pick up on the apple and books

@metalmansweden 24 күн бұрын

Good shit! Now I need to practice for little more than 16 hours 😁

@williamtromblay6795 22 күн бұрын

😂 😉

@MagnaMachineWorks 24 күн бұрын

Cass’s book is next to impossible to find these days. You are totally right though. Read the book and put it into practice. Then you will fully understand.

@paulnewton943 23 күн бұрын

Hi matey, I purchased mine last year second edition too. Do a search on the full title and google books comes up. Go from there.

@williamtromblay6795 22 күн бұрын

Hi, there are few copies left, last I heard. Let me know if you need one and I will check on it.

@motleymetals 26 күн бұрын

Awesome video and another book to add to my list. Looking forward to trying the technique

@johnfields7936 Ай бұрын

I love your videos! Pls keep them coming!

@williamtromblay6795 Ай бұрын

Thank you! Will do!

@SheetMetalShaping Ай бұрын

Great video, lower mass = less hit strength. Makes total sense!

@davestaggers2981 Ай бұрын

In engineering and material science, "Elastic" means that the deformation goes away when the load is removed. It has nothing to do with the direction of the load

@williamtromblay6795 Ай бұрын

Hi, a challenge I have is conveying advanced material science in a way that is easy for a metal shaper to understand. Thank you for the comment, I will try better with explanation. Bill

@davestaggers2981 Ай бұрын

@williamtromblay6795 Sometimes, the same term means different things in different fields. For all I know, in the specialty you are teaching, "elastic" is used exactly the way you used it, and it is just a difference in jargon between the fields. Having once been a machinist , and now being an engineer, I see a lot of value in different disciples understanding one another's jargon.

@hermanzon6116 Ай бұрын

Thank you for the grate information!

@trottermalone379 Ай бұрын

Bill, another well structed and informative offering! Thank you for your commitment to expanding the KZbin knowledge-base specific to metallic materials mechanics. That said, you have left me with a dilemma. The words you are using in your descriptions are not being used accurately. Let me know if you would like further explanation and I can follow up. Cheers!

@williamtromblay6795 Ай бұрын

Hi, I assume this is in regard to referencing the electric wire comparison and the plastic of the die?

@trottermalone379 Ай бұрын

@@williamtromblay6795 Bill, it’s a bit more studious than any of your admittedly good examples. The primary reason I comment is that you appear to want to explain the underlying theory and mechanics of what is happening to a metallic material when being worked; you are being fundamental and rigorous, and are to be commended in this day of quick convenient superficial artifice. As I am sure you appreciate, Materials Mechanics is a highly codified science with a very specific language. For example, the inverse of “compression” is “tension” (not stretch), be that a load, a stress, a strain, a failure, etc. The obverse of “elastic” is “plastic” and is usually associated with deformation. While I understand what you are saying, “elastic stretching” and particularly “compressive stretching” are misnomers. Again, no offense intended, let me know if I can assist.

@williamtromblay6795 Ай бұрын

@@trottermalone379Hi, thank you for the note and I agree 100%. My challenge is explaining an advances science in a way that a metal shapers would understand simply. Please let me know if you have suggestions on how I can convey some of these concepts better, i do appreciate it, Bill

@trottermalone379 Ай бұрын

@@williamtromblay6795 Bill, I believe I can assist by helping you establish a coherent foundation of concept and language that is consistent with the cannon of literature, relatively easy to grasp (i.e. little math needed) and uses words everybody (most everybody…) has heard. Probably better to take this offline. How do I best contact you? If you drop your email address into your KZbin “more” account details I will use that. I have found your bread crumbs on line via Google but no contact info.

@jackpledger8118 Ай бұрын

Bill, are your plastic dies made of Delrin?

@jackpledger8118 Ай бұрын

Bill, another great explanation of what is happening when you accomplish metal shaping.

@sleepingdogs8939 Ай бұрын

I just found your channel the other day and have enjoyed watching some of your videos. I like your channel because you're the first person I've seen on KZbin that does a lot of aircraft parts in aluminum. It looks like someone is restoring a Fairchild 24 from some of the parts you showed in your videos.

@williamtromblay6795 Ай бұрын

Hi, I own a Fairchild 24 that Im restoring and making parts for several others. Thanks for watching.

@sleepingdogs8939 Ай бұрын

@@williamtromblay6795 I too have a Fairchild F24R46 that I'm currently restoring. I also have a Waco AQC-6 project that I'm just getting started on.

@terrydoss8565 Ай бұрын

Bill- Thanks for sharing your knowledge. Really enjoy your presentation style. Clear, concise, and matter of fact.

@davidhamer8333 Ай бұрын

Great insight Bill. it wasn't something that I had thought about until now, useful info, thanks.

@theoldstationhand Ай бұрын

Nice to know the theory behind the craft. Cheers👍

@kennethstaszak9990 Ай бұрын

Well done William! I particularly enjoy learning the technical side.

Ең жақсы KZbin

Пікірлер