Why the hell are you blocking out the face of the gauge when you're filming? Afraid of what?
@GAbutAnakMuda2 ай бұрын
Indonesia ❤
@irfanharish52842 ай бұрын
how do you not trigger her whirlwind slash
@ShiftdModz2 ай бұрын
In the 2nd phase? I just tried to dps her down as quickly as possible so don't have to deal with the mechanics
@spookyghost31392 ай бұрын
GOD DAMN IT, I just want to see what Ansbach says if he survives the battle.
@ShiftdModz2 ай бұрын
I'm just happy he said some dialogue as miquella/radahn say nothing at the end.
@KaraSub2.02 ай бұрын
mine doesn't do that much damage
@ShiftdModz2 ай бұрын
@@KaraSub2.0 it does even more damage as you level the fragments. Stopped using the mimic as it was too easy.
@dymonkhlopov864 ай бұрын
3 kisses the rock - its fatality, wont finish in real race... still good driving and setup
@jwilsnach4 ай бұрын
Is this the o11 evo xl or just the evo dynamic?
@ShiftdModz4 ай бұрын
Just the regular 011d evo
@xuimod4 ай бұрын
Neat how you can see the guy holding the pace notes on the right screen.
@the9prince4 ай бұрын
Lian Li fans dont have reverse blade models?. i think the intake should be reverse blades to look cleaner.
@Shamrocks775 ай бұрын
Champion 🏆
@tomywithcats49335 ай бұрын
Took me some time to realize that its a big screen, not a weird vr
@DxSimRacing5 ай бұрын
Great ❤❤❤
@arnielsayson-sl9wn5 ай бұрын
yes try it....bro
@ethanbowie30505 ай бұрын
hell yeah!!!! GREAT DRIVE BRO. KEEP IT UP 👍😉
@mongocain8136 ай бұрын
Great strategy and I finally beat her. Thanks for the video.
@LorenzoPennuto-f8v6 ай бұрын
Hey, is it just the exhaust or did you include the whole racing terminal? Thanks!
@ShiftdModz6 ай бұрын
The kit is just the muffler and the upmap key
@27schmidty6 ай бұрын
what dashboard are you using
@ShiftdModz6 ай бұрын
Simcore DS5 dash
@wetcement436 ай бұрын
sick sim setup
@Bondy20106 ай бұрын
Can I ask what this cost to build? I know prices can vary for parts, but just roughly or even a range. Thanks.
@ShiftdModz6 ай бұрын
It was around $6.5k aud at the time. PC parts are a little cheaper now I think
@jeffstrains40147 ай бұрын
I notice you have a collar around that Distro plate, Is that something custom? I am debating on just drilling a hole in the glass on my build. Thanks
@ShiftdModz6 ай бұрын
Collar? The distro is stock from EKWB, no drilling required.
@jeffstrains40146 ай бұрын
I looked at that wrong, I thought you had a custom gromet if you will around that distro block to use in place of glass. I have that same block and am getting a company cut me a piece of glass drill a hole and temper it so I can leave the the drain in @@ShiftdModz
@ShiftdModz6 ай бұрын
@@jeffstrains4014 ah right, im not using the front panel glass where the distro is as I'm using one of the external ports on the distro for the drain valve as its way easier to use than the one on the inside
@Morgzzz5987 ай бұрын
Noice
@zdenekhradecky21927 ай бұрын
Už zas ten hnus to není závodní simulátor ale letecký ty machři asi vzivote nesedeli v autě
@filo317 ай бұрын
crazy fight man
@Cast6667 ай бұрын
ng+? crazy tho
@ShiftdModz7 ай бұрын
Yep, ng+
@DV_Stryker7 ай бұрын
Норм катнул.
@DV_Stryker8 ай бұрын
Лайк закинул к видео.
@DV_Stryker8 ай бұрын
Красавчег
@xriss228 ай бұрын
is this for the icon or the full throttle? thanks
@ShiftdModz8 ай бұрын
This is the Icon kit and I sprayed it a dark brown to cover up the bare stainless steel.
@xriss228 ай бұрын
i see. do you know what is the difference between the full throttle version? I have the same bike and planning on getting this too. thank you. :)@@ShiftdModz
@ShiftdModz8 ай бұрын
@@xriss22 I think the full throttle version has a cover over top of the mount but it might get in the way of using the stock plate light which I'm using. Also, I have had to bend the mount upwards slightly as the wheel started to touch it from bumps. Hope that helps mate.
@scorpius18279 ай бұрын
Hey mate, I assume you used some sort of RGB hub for all the EKWB rbg cables? or did you have enough rgb headers on your motherboard?
@ShiftdModz8 ай бұрын
I used a EKWB rbg splitter cable for the EK parts and the Lian Li uni fans all run off 1 uni fan controller
@donsterlai9 ай бұрын
I am just about to build one, for the side, is there any space to mount another radiator on the back ? I am thinking of a 360mm rad. Or 3 fans is enough?
@ShiftdModz9 ай бұрын
Yes, you can fit a 360 rad on that side mount. But if you mount a rad and fans to the top then it will be a bit tight but can work.
@romeo90110 ай бұрын
What turn signals are those? Looking pretty sweet 👌🏼
@ShiftdModz10 ай бұрын
They're the stock indicators with the Nightshift
@napssleeps11 ай бұрын
what fittings did you use to connect the top radiator directly to the distro plate?
@ShiftdModz11 ай бұрын
I used the EK quantum torque push in fitting... It's the old radiator model so it didn't exactly line up with the distro so I only used one push in fitting
@martyn_g Жыл бұрын
I think this bike is where the Monster used to be… Ducati, like Triumph have taken their street fighters and turned them into naked crotch rockets. Which is a shame. That’s why I like the Scrambler. It’s like a late 90’s street fighter.
@kenrosenberg6778 Жыл бұрын
fire build
@jordirevert6937 Жыл бұрын
Wow!! Podrías pasar el enlace del porta matrículas ese??
@denys.martyniuk Жыл бұрын
That's hot, dreamin about this one
@rickbarker4467 Жыл бұрын
Room for a rad in the bottom and on the side, save the top for exhaust.
@bigmama126 Жыл бұрын
Wir haben auch die Night Shift
@sirdrp6982 Жыл бұрын
What is the purpose of that bridge you made on the distro plate ? Planning a similar build and am just curious. Thanks
@ShiftdModz Жыл бұрын
I'm not using a bottom radiator so I bypassed one of the outlets. A bottom radiator was a little tight and this build only needs one radiator anyway. Both CPU and GPU run around 50c when gaming
@sirdrp6982 Жыл бұрын
@@ShiftdModz makes sense! thanks for answering!
@javierc4683 Жыл бұрын
he only used 1 radiator on the top ? or did he use more than 1 ?
@sinsinsss5216 Жыл бұрын
Kok iso gelem di nilai perbudakan Eropa lha perilakune isrsel dll kui opo karo rakyate dewe hama di kon perang ngono hahaha
@andrewbako9494 Жыл бұрын
building a 4090 13900k water cooled with the fog coolant - looks SO good!!
@quantino1611 Жыл бұрын
hey, I just ordered the exact same case i have asus rog strix z790-f motherboard and was wondering weather it will fit nzxt z73 on top with all of the rest fans in total of 10fans including nzxt z73 being on top or my motherboard is going to block 1 fan thats on the right side? i would be very happy to know.
@ShiftdModz Жыл бұрын
Not really sure but high probability it will be fine. I'm using a EK 360 PE rad at the top with fans which is the thick 40mm rad and it clears the MB. There is space to install a single 120 exhaust fan but I just chose not to install it
@quantino1611 Жыл бұрын
@@ShiftdModz thanks!
@andreafalzoi7362 Жыл бұрын
Very nice drive, can you share your setup? 😊
@ShiftdModz Жыл бұрын
Cheers mate. For nordschleife I just use the iracing low downforce setup but there is a new version of this car now so it may handle differently.
@danted4102 Жыл бұрын
this fit without any modification? I've seen that the competition werkes for the full throttle will also work on the Nightshift.
@ShiftdModz Жыл бұрын
No modification required with the icon version, lined up exactly with the stock bolt holes with the indicator housing. I did rattle can it though as it's just bare stainless steel
@gymandmusic3 Жыл бұрын
perfect!!!!!!!
@JP1970 Жыл бұрын
Love that man--I have the Competition Werked pipe in my 2022 Night Shift, with no remap. Liked and subbed!