Thank you!

Good luck

4:05 Very interesting...I did just over 8 years in the USCG(2002-2010), and I don't recall ever using a HF distress band, we certainly didn't monitor that channel at the 3 small boat SAR untis I was stationed at. Maybe that's why nobody responded lol.

You like to see grown men naked? That's cool.

My neighbor needed his water pump rebuilt on his JD. With your instruction, the whole operation was completed without any issues. Thank You

This happened to me on a snapper mower

Thank you for this video!!!

Thanks for taking it apart to make the video. Did you make your $100? Lol now that it’s three years later

Beautiful trucks I wish made new cars from iron like this,,,,what wrong with cars companies you are great nation why doing this

Good job

This will help my friend tremendously. Thank you

Exactly what I was looking for.Thx for taking the time to make this video.☆☆☆☆☆

Yes you said something very important at the very last of the video to put the hub pulley on the shaft not the bearing why didn’t you recorded that part that is been the most difficult thing to do. And i didn’t understand how you said you did it. Do you have s drawing off since sort

Question. Will this solve cold air blowing on driver side and warmer air blowing on the passengers side?

Is there supposed to be a ball bearing some where, when I took mine apart there was a ball where the motor attaches to the hydro booster, where the oil flows on the oval plastic gaskets

Thank you this is much needed information. I used my grandfather's horse last year just fine and this year it had a hard time moving and with my grandfather's passing and no knowledge on how to adjust anything this is most helpful

Thanks for watching. I hope you hit the like button and join my channel. Hey is Seldom Seen in reference to the bluegrass group?

Thanks for watching. I hope you hit the like button and subscribe to my channel.

Thank you that's a good video

Thank you!

Also lube the pivot points and rollers.

Great vid. Foam insulation envy. Looks like you are in a giant Yeti cooler.

How would the know it was abandoned ? There could be a corpse on board.

I subscribed . I have a 1979 and was runnin it in the garden yesterday. I’m 70+ and live in Crocket Tx. Where you at ? 5/12/2024

They cain’t keep up to us old southern boys when it comes to makin do ! Jesus said “My people perish for lack of knowledge “.

OMG! My husband had had a new belt installed, new spring . . . nothing would work but for him to one-arm that tiller through the garden while holding down that PTO clutch lever!!! Thank you SOOOO much for this clear, easy-to-understand video. (And if the reverse ever stops working, we'll know what to do!)

Sweet thanks, wish I had watched this video yesterday 😂

Aimless, don't know if you'll get this three years out, but your video here saved my hinder end. Left my '78 horse sitting for 20 years after the garden didn't need tilling any more and gravity took its toll. These two problems and more to solve, but your instructions were key to success. Thanks!

Love it.

Great video man !!!!

The Coast Guard just Like doctors, their nurses and military asking the same questions over to ensure there is no changes in response or confusion as what is going or happening. This is done in order fulfill the correct needs to clarify a solution or act. Weak signals can be difficult on either end of a conversation. It has nothing to doing with inadequacy of work force or national health care needs. Jim Rodgers

🌝🌔🌓🌒🌚🌘🌗🌖🫡

All that sand.. must have been Rommel's staff car. Thanks for sharring

Thanks for the vid. I'm going through the same process you did, and also have the spindle problem (which results in this being a recurring problem on my ranger 800. Did you ultimately come up with a fix?

Good job

Glad to see you’re VW project. Your not kidding about the rat’s nest.

Another great video Kevin, love the trick where you take a small bit of the grating off to remove the blend door, last time I helped my pop fix his, he pulled the entire dash off. Not lookin to do that to my truck. 😅

You have A lot of acquired skills and knowledge, so you could consider showing "more inclusive" video's because if you omit any steps in the process of taking things apart or assembling them, then people with little or no related expertise may not be able to do the job you were aiming to teach them correctly, so don't be shy about make your videos longer while ensuring you show and explain every step of a given task clearly. Stay safe, regards Niels.😀

Very informative sir, thumbs up & subbed! That orifice/restrictor allows the the refrigerant to "flash" once it travels through it; it experiences a considerable psi drop on the outlet of the orifice & with that significant psi drop, comes a congruent temperature drop of the refrigerant. Once that cold refrigerant gets heated again (after going through the evaporator - which is really just a heat exchanger - since warmer, ambient air is being constantly blown over it) the refrigerant then changes state again, back to a vapor/gas, to be pulled back into the compressor to start the loop over again. Another 'rule of thumb' tip, larger diameter lines in a system like that usually contain the low psi, since in order to move the same volume of refrigerant as the high psi lines, the diameters need to be increased.

I have a old one that was used by u haul. It's not the original engine but has the 8hp briggs updraft carb. I replaced the belt and looks like I'll be doing adjustments. I'll need to check mine like you did but it seems I'll need to go shorter on the belt because after replacing the belt and engaging forward it still doesn't stay tilling the belt slips even after adjustments.

they sell rubber boot ( caps ) to cover the end of the axle shaft, keep it clean !!, good video , thanx !!

This was a great video thank you so much for a great tutorial for horse 2 model and possibly horse 3 and 1 adjustment as well

was your steering wheel off center after this? did you have to get an alignment?

I love the way you figured it out most people just give up your awesome buddy!!!

Mine has two belts on it and it works fine. I just use the range selector when forward and reverse is in neutral. I guess I am confused about the two belt comment. Thank you for sharing all of your knowledge!

Great video 😊❤

Can you post axle bearing and seal numbers. You only posted 1 Bearing number not clear are there 2 numbers for inner and outter Bearings or are all 4 the same ?

Great piece of maintainence on your part... VW door hardware was never best build factory quality. Especially the outer door handles. If you have the original window latch hardware they can be rebonded to the glass using the same adhesive used for windshield mounted, interior rearview mirror mounting plates. The surfaces must be super clean to accomplish a good bond between the glass and the metal. Thanks for sharing.👍

Picking up a garden way troybilt horse today. It is suppose to be garden ready, we shall see. Thanks for the tips. Also subscribed.

Thanks for the video I have a jd350b dozer with a bad water pump fan is loose but not leaking