Пікірлер
@adamking3506 Күн бұрын
I just found one of these at an antique store for about 10 bucks. Looks like yours does in the beginning, excited to make it look like how yours does at the end, thanks for the video!
@barbarapedelty2839 9 күн бұрын
I enjoyed watching your youtube, Thank you so much for not playing any music. The sound of your voice and the natural sound of the Restoration of your 1930's Miner's Carbide Head Light was very relaxing to watch.
@acraftsmansarsenal 8 күн бұрын
Thank you!
@kyrlecahill1902 25 күн бұрын
Loved the Video Learned lots Thanks
@MrWorldasmaya 26 күн бұрын
I hope this is helpful, as I haven't seen anyone mention it. BOTH the No 5C Type 11 and Type 12 had 3 Patent stamps. The way you tell them apart is by the adjustment nut (knob). There were two sizes of adjustment nuts made: An adjustment nut 1" in diameter (called a 'small') is only on the type 11 and an adjustment nut 1 1/4" in diameter (called a 'large') is a type 12. There is no way to distinguish a type 11 from a type 12 by just the number of listed patents:).
@randycamp4280 Ай бұрын
I just bought a1948 model I believe. The front tote is higher and does not have the patent dates in the bed. Mine has a corrugated sole too. I have your model also, but I like restoring them and getting them back in working order. Great video!
@MrGlowhound Ай бұрын
Jyst bought one I'll be fixing mine. Thanks.
@dodgersfnshepard8673 Ай бұрын
Love the fact it's a number 5. I just grabbed a no3 and 1 looks similar but no marks. They will both follow this process. Scratch out on japaning was genius
@aslamtu 2 ай бұрын
Nice shaving
@chrisbrown33 2 ай бұрын
I've restored literally dozens of old planes just like yours.... I must be addicted to it. I enjoyed every second of your video.... Very impressed and professionally done. I can't bear to see these fine old tools go to waste. Thank you 👍
@acraftsmansarsenal 2 ай бұрын
Thank you!
@wooliegeek 2 ай бұрын
What kind of wire brush are you using on your buffer and what speed. I’ve really been struggling trying to clean up the corrugations.
@acraftsmansarsenal 2 ай бұрын
It’s a Forney brand, fine bristle wire wheel
@sjchapin 2 ай бұрын
What specific wire wheels were you using on the grinder and the Dremel?
@acraftsmansarsenal 2 ай бұрын
The wire wheel on the grinder is a Forney brand, fine bristle (which I highly recommend). The wire wheel that I used with the Dremel is not intended for use with a Dremel and it’s just a “no name”. I couldn’t tell you where to find them. I think I got that one at an estate sale.
@master7883 2 ай бұрын
Restoration...? 🤔
@Steff320i 3 ай бұрын
I love the fact that you made it fully functional again, but still kept most of the pitting. You conserved the history and the scars of this beautyful tool. Just imagine how many hands and people used these scissors before you, and how many decades of life are still left on it. Thanks for sharing.
@NanYatesNews 3 ай бұрын
It’s “Wisssss” not whiz. They are fabric shears.
@_BigLife_ 3 ай бұрын
Nicely done
@nichterreichbar787 3 ай бұрын
Did someone know where i can buy a flint/striker contraption like that from the lamp with outer threads ?
@user-ps2ps4gq2u 4 ай бұрын
Excuse me, is the liquid you soaked in vinegar?
@trevorhaddox6884 4 ай бұрын
What material did you use for the gasket? I need to change the gasket on mine, leaked on me and almost singed my hand. Probably should change the crusty felt (the filter part) too, didn't think to just use a big cotton ball but that seems to work just fine.
@acraftsmansarsenal 4 ай бұрын
I cut it out of a sheet of rubber but I think a cork gasket would work better.
@OORAH659 4 ай бұрын
YEP... Good job dude. We The Few like your methodical appropriate 'take it nice and easy' .... We love are in love with em knobs..hehehehe OORAH!!
@JamesDeanPhotography 4 ай бұрын
I really like what you did with this plane!! Glad you didn’t try making it look new. You brought it back to life!
@jaredthomas8794 4 ай бұрын
Very nice restoration
@BenNawrath 4 ай бұрын
What I’ve done for the brass knobs with knurling is either only run the wire wheel with the “grain”, so it gets in between, or use a nylon wheel on my dremel to get in there. Not the scotchbrite, but like nylon bristles. Works awesome. Not really applicable here, but rustoleum makes clear paint. It’s great for metals where you like the patina but don’t want it to rust more, like the handles on the drill press I did.
@moobaz8675 4 ай бұрын
Cracking job.
@Roy_Patrick 5 ай бұрын
I grew up using one of these!
@erkeltree 5 ай бұрын
The great thing about these old planes is that they are restorable to new operational ability. I love them and working on them.
@diegohperez6434 5 ай бұрын
Very good job I really enjoyed thanks I say hello from London
@johnjensen5540 5 ай бұрын
Beautiful. This makes me want one so bad.
@RobVaderful 5 ай бұрын
I am surprised and impressed by the brightness of this small lamp.
@maynardjohnson3313 5 ай бұрын
The proper way to light one of those things is to create a gas pocket with the palm of your hand and move your hand sideways and spin the flint wheel with the palm. You can use it to light the dynamite fuse as you holler "shootin' coal".
@arncj18 6 ай бұрын
what is the wattage on your Pfingst flexshaft tool (180w?)and max rotation? also cost? i need to buy on or something at least close to it
@arncj18 6 ай бұрын
great a lot of good decisions, a lot of people over polish and sand away the character of the casted handles, or etch them in evaporust then remove too much material. You struck a great balance. these things don't need to look brand new, while looking brand new. That is the trick
@johnrhodez6829 6 ай бұрын
Now try to construct an acetylene flame microphone. (yes it was a real thing back in the early days if radio)
@gunnyoorah1846 7 ай бұрын
That was a very helpful restorational instruction. We learn your technics and will apply to our work. Thank you ...OORAH!!
@nicdvs 7 ай бұрын
It's a Bailey, not a Stanley.
@wwtrkr3189 5 ай бұрын
It's a Stanley. Bailey was the guy that designed the original back in the 1860's. Stanley bought the design and then employed him. Hence the much imitated Bailey design, still produced by dozens of manufacturers up to this day. It was truly revolutionary after millennia of wooden planes, but this one, is a Stanley and they were the only company to use the Bailey name. The type numbers referred to are a system used by modern collectors to define age (type 11 1910-1918) as Stanley developed and improved the plane design over the decades, until (in my opinion) they started dropping quality in favor of cost after the Great Depression of 1929. It really is a fascinating history.
@CrustyRestorations 7 ай бұрын
Amazing finish, I've got one like it the project pile👍
@kellycarver2500 7 ай бұрын
Great job, and more patience than I have. Beautiful light, too. I just discovered this fuel and lamps today. Saw a vid of an old welder still using carbide to weld with. Pretty amazing. I want some of these lamps.
@dancoulson6579 8 ай бұрын
Looks just as, if not, _brighter_ than modern (up to the 1990s) incandescent flashlights. Certainly looks brighter than my 2 D-cell Maglite with a krypton bulb. I also like that it has a really nice warm glow. Nothing looks worst than the cold, sterile, bluish dazzle from an LED. I really admire that you don't change the functionality, just restore to original greatness. It lets us see how things used to be. Nice work.
@judythymian3469 8 ай бұрын
Great video, you need better audio, but love the way you handled the plane!🌵🤠
@acraftsmansarsenal 8 ай бұрын
Thank you! Yeah, I need to get a microphone for my next video.
@williamlouis5011 8 ай бұрын
Nice restoration. Also nice to see the correct sized screwdriver for the screws!
@acraftsmansarsenal 8 ай бұрын
Thanks
@TheAir2142 9 ай бұрын
These little lamps are amazing. I recently bought one to camp with and it makes starting small cooking fires a breeze while also allowing me to choose how much light I want to some extent. If needed to you can also use the soot from the flame to mark rocks along your trail and leave “breadcrumbs” instead of leaving plastic flagging tape tied to trees or spray paint.
@RestorationsFOD 9 ай бұрын
Beautiful
@jawediqbal9475 11 ай бұрын
My elder brother brought No 4 from saudi arabia sam like it in 70's, which has grooves in bottom and same wooden handle and knob, I used it here in Pakistan for 3.5 decades. What a wonderfull tool, but Gem for carpenters. Thanks for sharing.👍
@QuackerSniper 11 ай бұрын
Great video !!!! Badass . . . . COOL !!!
@johnnyzone1967 11 ай бұрын
Nice work, thanks for sharing. Through habit I set the knobs on all my planes with the grain running with the direction it’s being pushed in to reduce any chance of splitting out the bottom. Additionally, following a 3-5 day wait after spraying a finish on the knobs, I rub back with 0000 steel wool and then buff with Autosol (chucked in a battery drill) for a glassy finish 👍
@acraftsmansarsenal 11 ай бұрын
Thanks for the tips. I’ll have to try that steel wool trick.
@johnnyzone1967 11 ай бұрын
@@acraftsmansarsenal I forgot to mention that I add paste wax after the buffing is done.
@philipchandler330 Жыл бұрын
Excellent
@acraftsmansarsenal Жыл бұрын
Thank you!
@lincolndickerson1293 Жыл бұрын
Enjoyed watching the restore of this #5. I did one very similar last year. I learned a few things here I will revist on mine. Thanks for sharing.
@escapetherace1943 Жыл бұрын
patina gone antique ruined just kidding, but seriously leave the patina sometimes, it's better than exposing new material and will make them last even longer...
@samipso Жыл бұрын
Fantastic.
@salth2o Жыл бұрын
Great job restoring these wonderful shears!
@acraftsmansarsenal Жыл бұрын
Thanks
@patriciapimenta5084 Жыл бұрын
ficou super legal