They are still on the car and work just fine, thank you for watching, appreciate it
@matred353821 сағат бұрын
That's a monster! I just ordered one after getting the 1/14 street bashing version. 👍
@NBRC17 сағат бұрын
it sure is, you won't regret it. thanks for watching
@RcpsychoRen2 күн бұрын
good to know! ;)
@NBRC2 күн бұрын
lipos need to be taken care of
@mpampis_o_fou20274 күн бұрын
Beautiful job,
@NBRC3 күн бұрын
@@mpampis_o_fou2027 thank you very much
@RcpsychoRen4 күн бұрын
Oups.....😢😅😅😅
@NBRC3 күн бұрын
sh*t happens lol
@dhhucker6 күн бұрын
Lol a Max 6 is mind boglingly overkill for that motor
@NBRC6 күн бұрын
i know, i am going to run just 4s, running 6s will kill the stock motor for sure
@RcpsychoRen8 күн бұрын
closer each time
@NBRC7 күн бұрын
indeed
@Boogie_the_cat9 күн бұрын
I didn't notice an SMC battery in the test... If it was there I didn't notice the label. SMC is the only high performance Lipo i buy, because SMC tell you on their website that EVEN SMC lies about the C ratings, to sell more lipos. But my SMC battery never fails to put out every single amp that my Max 8 G2S demands at high speed and high traction surfaces. CNHL is second place, but costing similar to SMC, the CNHL struggles more to provide amps in same vehicle same running conditions. CNHL is good, but overpriced. I never owned a Gens Ace, but their prices are just absurd, and I can't see them outperforming my "150C" SMC, not in my Kagama. Great video. 👍🏽
@NBRC8 күн бұрын
you are right, i don't own a SMC battery
@7420Racing9 күн бұрын
How do I take the whole front off?
@NBRC8 күн бұрын
unscrew it ... easy.. check the exploded view on the arrma site
@MazDhaniMobilsitubondo10 күн бұрын
Esc pakek apa bang
@NBRC8 күн бұрын
do you want me to do a video about it?
@Boogie_the_cat10 күн бұрын
I'm sorry, I'd love to help but I've never owned a crawler. Only street car and off road trucks in my experience. ¯\(°_o)/¯
@NBRC10 күн бұрын
no problem, it isn't that easy these crawlers but thanks to a good friend i am getting it done.
@Genxpoppy11 күн бұрын
WHERE CAN I GET THOSE COOLING FANS??
@NBRC11 күн бұрын
you can buy the fans on aliexpress (serverfans)
@Mikey2305812 күн бұрын
Nice 😊
@NBRC11 күн бұрын
@@Mikey23058 good cameraman
@Mikey2305811 күн бұрын
@@NBRC thats True
@DEWGARAGE15 күн бұрын
Did you end up doing iy
@NBRC15 күн бұрын
@@DEWGARAGE if you are asking if i upgraded it, yes i did. want to see more vids ?
@RcpsychoRen15 күн бұрын
very nice one !! put a droid as a pilot ;)
@NBRC15 күн бұрын
@@RcpsychoRen i am open for suggestions 🤣
@a3653812 күн бұрын
Too bad the real Bronco is IFS, otherwise I’d be all over this
@RcpsychoRen15 күн бұрын
in progress.....
@NBRC8 күн бұрын
indeed
@jakubnosek426516 күн бұрын
Scorpion stock tires is perfect for prize, i have them on my radix 4s, but this in my radar too
@NBRC8 күн бұрын
cool
@jakubnosek42658 күн бұрын
@@NBRC im surprise they are glued..
@NBRC8 күн бұрын
@@jakubnosek4265 yes and really good
@Boogie_the_cat17 күн бұрын
These are $24 US dollars right now. Ordered myself a pair. I can't believe Temu also has Felony tires, with the larger rear and smaller front tires. I'm tempted to try those too. I was on Temu 7-8 months ago and their RC tire selection was garbage for anything above 10th scale. Great video. I stopped ordering from there and never would have known about this huge tire selection. I'd love to see a video on their monster truck tires, as Kagama tires are like $120 for a set. 👍🏽👍🏽
@NBRC8 күн бұрын
if i can find a decent set i will sure try them out
@Boogie_the_cat8 күн бұрын
I did a (dumb) test of these tires on my Kagama. They handle 6s just fine, but for obvious ground clearance and tire diameter reasons, I wouldn't recommend these FOR the Kagama. I know they aren't monster truck wheels, size is wrong, but I wanted to see what they would do. The glue held up pretty well, but being a heavy truck, you probably shouldn't put these on the Kagama and do power slides over asphalt and gravel, because a little of the tires are coming unglued in small spots. Likely because the truck is too heavy and large for the buggy-style tires. I wanted to see how they held up to maximum abuse in a truck they weren't designed for. They held up fairly well. I would suggest anyone who uses these in 6s extreme conditions, to add some extra Bob Smith Industries IC-2000 rubber-toughened super glue to the outside rim area. The BSI glue is slightly flexible, and I think this should help tires stay on wheel rim in extreme 6s conditions. These are high quality for the price, and I didn't notice too much ballooning, so I believe the rubber is a decent thickness and strength. A good buy for 8th scale buggies. Probably the best in class on Temu.
@Boogie_the_cat8 күн бұрын
@@NBRCThat would be excellent, thank you sir. 👍🏽👍🏽
@NBRC8 күн бұрын
@@Boogie_the_cat thank you for clarifying this all
@Boogie_the_cat17 күн бұрын
I am impressed in how these batteries perform in the Kagama. I feel like i spent $85 too much on my SMC lipo now 😢. I will buy one of these Turnigy. I saw them on other channels, but i did not trust the performance, because they were tested in much lighter trucks. I found that the larger more heavy vehicles are less tolerant of cheap lipos. I ran Hoovo lipos in my 3s Granite for months on end, no problem. As soon as i got the Kagama, i run them once and the two 3s lipos discharged down to 2.6 volts per cell due to fake C rating, and too much amp draw causing voltage sag. I was really tempted to get 6s Turnigy, but seeing as i have 2 $32 paperweights now (Hoovos no longer charge due to low voltage) i bit my tongue and bought a 6s SMC lipo for way too much money. That is just my experience and i need to stress i only have 1 year experience in this hobby. These Turnigy batteries look like the real deal. I think i should buy one.
@NBRC8 күн бұрын
i have ran them now a few times and they perform real good for the money
@SpeedSyko18 күн бұрын
You’ll figure it out! You’re the man!🤘👊❤️🏆
@NBRC18 күн бұрын
eventually. how are you doing mate. been a while
@RcpsychoRen19 күн бұрын
Try with thé chassi on it
@NBRC19 күн бұрын
chassis is 3d printed ... tried already ... stopped and starting again tomorrow lol
@RcpsychoRen25 күн бұрын
6/10......lol
@NBRC25 күн бұрын
he is still learning ;)
@captaincouldverc25 күн бұрын
The jambo looks like a wild rig. I hope corally makes an updated version of the jambo soon!
@NBRC25 күн бұрын
drove a bit with it today (it's not mine) a true wheeliemachine
@RcpsychoRen29 күн бұрын
nice one !
@NBRC29 күн бұрын
thx buddy
@andrataylor6070Ай бұрын
Will this wheelie bar fit a team corally Python??
@NBRC29 күн бұрын
i think it does, i don't have a python. but if it doesn't fit ... you can always make it fit ;)
@hermanpotgieter344Ай бұрын
Im very curious to see how temu's paddle tyres run. Ordered myself a normal offroad set aswell now to test, will then see and get the paddle tyrrs
@NBRCАй бұрын
i was looking for the paddles to but i can't find the big ones, just the ones fro the small cars .. 1/12 etc.
@JohnsonAlva-q2nАй бұрын
Price Alley
@NBRCАй бұрын
what do you mean?
@eliflynn7282Ай бұрын
Seeing how there's 0 rc companies made in the u.s. why is it a surprise these tires from China are good? They're all from china.
@NBRCАй бұрын
I understand what you mean, but not everything you buy so cheaply is good, so that's why.
@Nitrotrician81Ай бұрын
I bought those from Amazon a few months back, I put em on my Losi 8ight. Love em!!
@NBRCАй бұрын
awesome.
@finku907Ай бұрын
Nice! First thing from Temu i've seen that's ok! Maybe balancing them would improve them more?
@NBRCАй бұрын
You may be right about balancing them, but i wanted to test them like they came out of the packaging. Thanks for watching. Appreciate it
@RcpsychoRenАй бұрын
nice grip !!
@NBRCАй бұрын
yes they grip quite good. I get the impression they grip better then the stock ones
@QuantumDanАй бұрын
Nice new tyres for the Temu Corally 😅
@NBRCАй бұрын
they sure are Dan, thanks for watching
@RC4usАй бұрын
so do you not like those stock tires??? i just bought a set for my typhon i just built
@NBRCАй бұрын
Stock tires aren't bad, no sir. But i think these have a bit more traction ....
@RC4usАй бұрын
@@NBRC those remind me of duratrax lockups
@NBRCАй бұрын
@@RC4us yeah they sure do look a bit like them indeed
@captaincouldvercАй бұрын
I've run those on my 3s typhon and they are amazing for the price. My neighbor also uses those on a couple of his buggies. I've seen them hold up to 6s power. They were ballooning so badly but they never ripped out came off the bead.
@NBRCАй бұрын
The do perform awesome. maybe i am going to test them out on a 6S car, don't know yet. But if people want to see it, i sure will
@posarabal4940Ай бұрын
👎👎👎
@robertpletcher3950Ай бұрын
Rc video reviews has this almost exact video 11 months ago. You should of at least gave him the credit. Looks like you stole his video. Not cool!
@NBRCАй бұрын
Thank you for the heads up. I didn't steal his video. I didn't even know about it. Sorry if this looked like i stole it. I always give credit where credit is due. I don't and Can't know everything ... But i put a link to his video this evening. Thank you for the heads up.
@RcpsychoRenАй бұрын
very close to!
@sprolkyАй бұрын
😂
@rcsendandblast1579Ай бұрын
👍☺️happy happy
@NBRCАй бұрын
sure am my friend
@CJTJBI1Ай бұрын
The Promoto is a reely good machine
@NBRCАй бұрын
i bet it is
@marioweinberger9478Ай бұрын
Hello, I just received my Kagama steering arm. Unfortunatelly, the Vitavon Wheel Hubs limit the steering angle way more than the original ones do. The ball joint housings are more than 1mm smaller and the lower steering angles are in my opinion a clear design fault. Did you have the same issues or is your steering angle the same than with the original wheel hubs?
@NBRCАй бұрын
i didn't notice this and I didn't check that. i think i have good steering, but i do a lot of steering and braking at the same time.
@finku907Ай бұрын
Great video, very informative! Thanks for all the great links too! "Thanks i hate it" Hahaha very funny!
@NBRCАй бұрын
Thank you, appreciate it ... Glad you liked it
@Mikey23058Ай бұрын
Hoe lang hebt ge kunnen rijden met die 6000mah?
@NBRCАй бұрын
Hangt ervan af hoeveel je op max power rijd. Maar ik was met de rijtijd toch zeer tevreden. Heb het niet getimed eigenlijk