2 ай бұрын
2 ай бұрын
9 ай бұрын
9 ай бұрын
11 ай бұрын
Жыл бұрын
Пікірлер
@geronimopulido3707 Күн бұрын
Great work!
@duckplayingchicken 19 сағат бұрын
Thank you 😊
@falconiusazurius5572 4 күн бұрын
I've looked at these a long time ago and was very close to buying them. My big worry was that they were going to be too big. Based on what I see in this video they are indeed HUGE, so I wouldn't have had any actual use for them.
@duckplayingchicken 4 күн бұрын
Glad to see the video potentially helped you save some money 😁
@michaelcahalane2923 8 күн бұрын
This is excellent and very inspiring. Also I love the fact that you can laugh at yourself :)
@duckplayingchicken 8 күн бұрын
Thank you 😁
@ZetaVec 17 күн бұрын
How did you get the foot onto the leg i cant get it to budge
@duckplayingchicken 17 күн бұрын
I had the foot on the table then pushed the leg down on the joint. I had to use quite a bit of force. Just make sure you aren't getting any armour pieces in the way when connecting the foot.
@fgjavonn 22 күн бұрын
Thank you so much
@duckplayingchicken 22 күн бұрын
You are very welcome 😁
@hmmdoh7835 Ай бұрын
it looks nice but kinda want a (1/144 if there any)so display along with the rest of Super Robot War in same scale 🤣🤣
@duckplayingchicken Ай бұрын
I've only ever seen the Layzner in 1/100, 1/72 or 1/48. I don't know if it comes in 1/144.
@DuyTran-vm3go Ай бұрын
What a little cute one
@duckplayingchicken Ай бұрын
That it is 😁
@SirSybian Ай бұрын
Thanks for posting. I always enjoy your builds.
@duckplayingchicken Ай бұрын
Thank you. Most appreciated.
@seanmoran4087 Ай бұрын
A small piece of adhesive sponge tape applied to each of the yellow pads on the clamp will help stop the bottle flying out. You can even put a hole in the end that takes the pointed lid, the same as you've done with the pad itself.
@duckplayingchicken Ай бұрын
Great idea
@lechtenborger Ай бұрын
I had no idea how to apply the stickers 😅 Thank you from the Canary islands! ❤
@duckplayingchicken Ай бұрын
Thank you. I am glad you found the video helpful.
@jelly8594 Ай бұрын
The fumes of ethanol are heavier than air and highly explosive/flammable. Just so everyone knows
@duckplayingchicken Ай бұрын
Good point 👍
@rctiger665 Ай бұрын
Is this snap tight? Or glue required?
@duckplayingchicken Ай бұрын
Yes you could snap fit this kit together without glue.
@stevethefishdotnet Ай бұрын
Very cool. I would rather there be one larger ship than two smaller ships. At first I thought one could paint one as Reinhard's white Brunhild and one could be Siegfried's red Barbarossa. However I just checked the Gineipaedia website and the Barbarossa is cosmetically different from the Brunhild.
@duckplayingchicken Ай бұрын
Thank you. A kit of the Barbarossa would be awesome. LOTGH has so many cool ship designs.
@P4rcival77 Ай бұрын
Amazing job, thanks a lot, I just got that set and it’s gonna be my first one. Lot of help here, thanks again mate!
@duckplayingchicken Ай бұрын
Thank you. I am glad you found it helpful. Have fun building this great kit.
@TheMS12345 2 ай бұрын
80 hours!!? Damn, looks great. Worth it for $63 on clearance? I think so 🤔
@duckplayingchicken 2 ай бұрын
Thanks. Yes it is definitely worth it if you can get it at that price!
@TheMS12345 2 ай бұрын
Nice, I’m going to grab it and probably be back to your page multiple times for reference. Yours came out great
@duckplayingchicken 2 ай бұрын
Awesome. I hope you enjoy building it as much as I did 😁
@thisisntwhereiparkedmycar8648 2 ай бұрын
Beautiful ❤❤❤
@duckplayingchicken 2 ай бұрын
Thank you! 😊
@Flayne009 2 ай бұрын
Thanks for this video. Immensely helpful.
@duckplayingchicken 2 ай бұрын
Thank you. I am glad you found it useful.
@stevethefishdotnet 2 ай бұрын
It's so cool to see you build this! I've been curious about these new kits. Apparently there is a kit of the Hyperion too now.
@duckplayingchicken 2 ай бұрын
Thanks. I will have to hunt down the Hyperion kit. As much as I like the Brunhild, I actually prefer the design of the Hyperion.
@stevethefishdotnet 2 ай бұрын
@@duckplayingchicken I've only seen that Mr. Hobby will have a color specifically for the Hyperion, just as they had released one for this Brunhild kit. I've yet to look up to see if the Hyperion kit is out yet. I actually have a modest stack of resin LOTGH garage kits by Alba. I've yet to paint any, but they are pretty incredible. They come with decals and some come with photoetch parts.
@duckplayingchicken 2 ай бұрын
I am aware of the LOTGH resin kits (probably because of your channel) but I have not had the pleasure of building any of rhem. They sound great and I am sure being resin would be highly detailed.
@williamcase426 2 ай бұрын
Zentradi battle pod
@duckplayingchicken 2 ай бұрын
That it is :)
@주석-o3o 2 ай бұрын
1:00:30 What is the outer diameter of the black power pipe?
@duckplayingchicken 2 ай бұрын
The original tubing has an outer diameter of about 2mm whereas what I ended up using was 1.5mm outer diameter.
@mecki4106 3 ай бұрын
Impressive effort! I really like the lighting ideas. You can make superglue more brittle by putting the item in the freezer for some hours. Some time ago I bought some built-but-unpainted Galleon tanks, and after a day in the freezer they fell apart cleanly, not even the guns pinned into the chassis posed a problem.
@duckplayingchicken 3 ай бұрын
Thank you. That is great advice about super glue. I will have to give it a go next time.
@FireBomberBassist 3 ай бұрын
If only I could paint. Good job.
@duckplayingchicken 3 ай бұрын
Thank you. I have painted many models that looked rubbish. Everyone has to start from somewhere.
@ncc17701a 3 ай бұрын
Great work!
@duckplayingchicken 3 ай бұрын
Thank you :)
@SirSybian 3 ай бұрын
good stuff !!! (halfway there)
@duckplayingchicken 3 ай бұрын
Thank you. Yes I am looking forward to doing the last 2 kits in the series.
@TECHJAMCHANNEL 3 ай бұрын
where u get decals for that
@duckplayingchicken 3 ай бұрын
I got them from Ali Express
@TECHJAMCHANNEL 3 ай бұрын
where you purchase decals
@duckplayingchicken 3 ай бұрын
I got them from Ali Express. All the rest of the colour markings were masked and painted.
@leo2a7dk 3 ай бұрын
Use guitar wire in a small "tune" for arials. I have also used stretched sprue many times. TOOOO fragile. Use it for cables on the vehicles..... But guitar string.. Yes. Have an old heavy clipper on hand. Dont use your expensive goghand clipper. Guitar string is a hard sucker to cut....
@duckplayingchicken 3 ай бұрын
Thanks for that tip. I will have to try it out.
@MASTER_LION 3 ай бұрын
You have some amazing techniques. I'm really looking forward to seeing the finished product! I'm rooting for you.
@duckplayingchicken 3 ай бұрын
Thank you so much. Comments like that make it worthwhile :)
@adamperry4347 3 ай бұрын
To my eyes, the Wave version is more screen accurate than the Academy version.
@duckplayingchicken 3 ай бұрын
I agree. I think the Wave version is a lot better representation of the ship from the original series.
@xavwren4161 3 ай бұрын
Did you purchase the kits locally in Australia, or did you get them shipped from abroad?
@duckplayingchicken 3 ай бұрын
I got these kits from Japan via eBay. A lot of the kits I build are rarely available in Australia unfortunately.
@tomobrouns8586 3 ай бұрын
im very new to these types of models(i have made loads of human miniatures before like from warhammer), and im very intimidated by this one. Do you airbrush everything(i dont have one yet)? is there a type of glue that you kind of need for these types of models? how do you make things shiny? do you need to prime a base layer? im just very scared
@tomobrouns8586 3 ай бұрын
why did you attach things and afterwards masking everything instead of leaving things seperated, then paint them, and then attach them?
@duckplayingchicken 3 ай бұрын
Yes I predominantly use an airbrush for models. I find that this gives me the most consistent colour coverage. There is nothing stopping you from using a brush to paint models like this but that is something I am not confident doing. Styrene cement is the type of glue I use. This welds the plastic together ensuring a solid joint. Yes I prime all my models with a surface primer. This allows the colour paint to stick better to the surface. It may help to check out my video on the tools I use kzbin.info/www/bejne/enPMqKR5bamAh7c
@duckplayingchicken 3 ай бұрын
You can paint everything separately and then glue it together rather than masking. The thing to watch out for is that the glue doesn't ruin your paint. Depending on the quality of the model you may find some of the joins may have gaps if they are not glued. Remember we all start somewhere. If you can get your hands on a small cheap model to practice on can also help.
@CrowemagModelWorks 4 ай бұрын
Great work, as always! What tweezers are you using?
@duckplayingchicken 4 ай бұрын
Thank you. The tweezers I use are Tamiya. I find they are well made and work very well.
@rearera 4 ай бұрын
awesome work my man!
@duckplayingchicken 4 ай бұрын
Thank you. Very much appreciated 😊
@lewistaylor1965 4 ай бұрын
Buy some small ball bearings and put one in every paint bottle to shake and mix....just beware that when you pour them out that the ball doesn't sit in the nozzle and block the pour...it sometimes happens
@duckplayingchicken 4 ай бұрын
I have used ball bearings before and found they work well. One thing to remember is to use marine grade stainless steel ball bearings so they don't rust or react to the paint.
@lewistaylor1965 4 ай бұрын
@@duckplayingchicken Yeah...good info....I've tried BBs that you get for BB guns work ok but a little bit on the light side....I also heard folk using nuts (as in nut and bolt) too
@ncc17701a 4 ай бұрын
These will look great when built. I made a couple of the 1/200th versions, but I haven't made the 1/170th ones yet - they are still in my stash. I have sets 29. 30, 31, and 32. Looking forward to seeing yours when it's completed!
@duckplayingchicken 4 ай бұрын
I think these are some of my favourite kits I have built. Partly due to nostalgia but mainly because they packed so much into a small kit. I am sure you will enjoy building yours when you get around to them.
@paulmorgan6269 4 ай бұрын
Figures let it down. Sorry.
@duckplayingchicken 4 ай бұрын
I know they are not my best work
@Gamakatana 5 ай бұрын
Goes through all this in-depth painting process, doesn't fully extend the fins and doesn't flip the cheeks for Destroy Mode. What a chad.
@duckplayingchicken 5 ай бұрын
:(
@CrowemagModelWorks 5 ай бұрын
Looks great! To address the seam behind that clear piece on the knee...I used reflective silver sticker paper behind the clear piece. Cannot even tell it is not painted. Additionally, you could glue some thing pla plate there and then paint it silver.
@duckplayingchicken 5 ай бұрын
Thanks. That's great advice about dealing with the seam behind the clear part.
@tonyrusso-dx8mx 5 ай бұрын
I have watched your previous 2 builds from my couch here in the U.S. and thoroughly enjoyed watching your process. I have found Mr. Dissolved Putty best for hairline seems where tube type putty is too much and Mr. Surfacer requires too many applications, though dry time is long. I look forward to the next steps!
@duckplayingchicken 5 ай бұрын
Thank you. I agree that Mr dissolved putty is best for specific applications.
@sosaix3545 5 ай бұрын
I have just about every model of the Godphoenix ever made, including these two - which I haven't built because I'm just not great at painting models and want to have it done by someone professionally - but I agree that proportionally, the Wave model is just about as close as it gets, with a few notable exceptions. 1) The lines all over the place - none of those were present in the anime, so I just don't know why model makers felt compelled to add them! Makes no sense. 2) The central "tail" formed by the G-1 coming in is the correct proportion for that ship coming in, but doesn't match up with how the assembled G-5 Godphoenix looked, where the central tail was a lot larger. That's why on the Academy model and others have interchangeable tails and/or artificially larger on G-1 than normally shown. Personally I'd prefer to see the large tail and don't have G-1 separate at all, or any of the other ships, for that matter. 3) Here, the front red 'chevron' is not angled inward as sharply as it should be, that angle should be more acute. But again, these are minor nit-picks and this Wave model nails all the other proportions and scale the best of all of them.
@duckplayingchicken 5 ай бұрын
That is an awesome analysis of the accuracy of the kit! I definitely prefer this version but there is always room for another Gatchaman kit :)
@oshaemurray 5 ай бұрын
MS 08 is one of the best ever. I want this so bad, just got into gunpla
@duckplayingchicken 5 ай бұрын
I agree. MS 08 is one of my favourites too. Welcome to the world of gunpla!
@oshaemurray 5 ай бұрын
@duckplayingchicken looked online for both tanks are pricey now smfh like the Pelican from Halo these will go on my "when I'm rich" list haha
@rearera 5 ай бұрын
Awesome work bro!
@duckplayingchicken 5 ай бұрын
Thank you. I'm happy to hear you like it.
@rearera 5 ай бұрын
@@duckplayingchicken brother your work is outstanding. I wasn't kidding when I said you're low key giving master classes on modelling. Your approach is thoughtful and detailed.
@99nessuno99 5 ай бұрын
This model kit is too small
@duckplayingchicken 5 ай бұрын
I would also like to see a bigger version of it :)
@thescalemodellerssupply 5 ай бұрын
Fantastic! This turned out brilliant!
@duckplayingchicken 5 ай бұрын
Thank you :)
@animalhalo5984 5 ай бұрын
46:26 when did this happen?
@duckplayingchicken 5 ай бұрын
If you are talking about when the life sized gundam changed from the RX78-2 to the Unicorn, that happened in 2017. I think the walking gundam RX78 F00 in Yokohama is closed for good. There is a message on the site saying it closed as of 31st March 2024. I spoke about a few things during this part of the video so I am not sure if this answers your question or not :)
@denniss4951 5 ай бұрын
I'm building these right now, very helpful videos. I'm just not sure how to paint the lines on the canopes black. I ended up re-painting them because my black paint work didn't come out right.
@duckplayingchicken 5 ай бұрын
They are tricky to paint if you don't mask them. Another way is to use a Sharpie pen to draw in the lines. Sometimes this is easier than painting them.
@denniss4951 4 ай бұрын
@@duckplayingchicken how about using a gundam marker? I haven't got them painted still. I just completed building all 4 (except I haven't put any of the arms on yet). Thanks :) also I did these all in high gloss clear coat laquer and I also got macross kite logo decals for the sides of the fuselage that I'm going to put on. They sell sheets on ebay. detailing these gets pricey man.
@duckplayingchicken 4 ай бұрын
Yes gundam markers would do the same job. I agree that you can spend a lot of money when it comes to detailing these kits - but I think it is worth it :)
@flashy5150 5 ай бұрын
I always liked “Tiny”, he was the main pilot of the “Phoenix” and he would always swoop in and pick up the rest of G-Force when they were in trouble - even 7-Zark-7 thinks so😜
@duckplayingchicken 5 ай бұрын
I have so many fond memories of the series as well.
@flashy5150 5 ай бұрын
“Prepare for the fiery phoenix … Tiny, put thrusters to full power ! “ 😉
@duckplayingchicken 5 ай бұрын
Love it :)
@stevethefishdotnet 5 ай бұрын
That looks incredible!
@duckplayingchicken 5 ай бұрын
Thank you. Most appreciated.
@Leipreachan-ar-meisce 5 ай бұрын
That is awesome. Love it.
@duckplayingchicken 5 ай бұрын
Thank you. Cheers.