Жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@alejandroguerrero9202 17 күн бұрын
Great video, straightforward short and simple. Thank you so much!
@RogerJohnson-j9v 23 күн бұрын
got both on my Dyna superglide
@sylwestermichalowski Ай бұрын
Wygląda to strasznie 🤦♂️
@AAchurch Ай бұрын
I want one. 😊
@pete2319 Ай бұрын
Looks like its running the oem oil cooler as well... it it still intact and working in conjunction?
@Salih.EduBlock 2 ай бұрын
Nice. Thanks
@Kpilato_21 2 ай бұрын
Totally not about what the clip is about just caught my eye an my opinion but wouldn't you want the foot pegs/ mini floorboards the other way around. The top left at the bottom left so when leaning in corners hopefully dont scrape. Amazing build, just my opinion and thought.
@michaelhudson303 2 ай бұрын
Dyna
@morrisdennis 3 ай бұрын
Got mine from Dennis kirk
@morrisdennis 3 ай бұрын
Luv mine😊
@dcccharles4569 3 ай бұрын
I have one of these oil coolers on my 2003 Road King Classic and it works great! Definitely keeping the bike at a safe operating temperature while optimizing my performance.
@4twentygrow 3 ай бұрын
? is this or any cooling solutions available for the 24 Road Glide ?
@bikelifetoot2457 3 ай бұрын
Do you have stock fan as well?
@bikelifetoot2457 3 ай бұрын
Do you also run a fan on the front of the bike above the stock oil cooler?
@geraldgoodiii6993 4 ай бұрын
Love mine
@samslade739 4 ай бұрын
117K miles? Looks like he's done pretty good without an oil cooler. So why now?
@geraldgoodiii6993 4 ай бұрын
Thanks for the idea for the light
@javiernunez124 4 ай бұрын
😀
@lseverin89 4 ай бұрын
Why not add more of them?
@goochma 5 ай бұрын
I love my U;traCool. I got the one that mounts on the down tubes, just below the regulator. It's barely noticeable, and it looks good anyway. But what I like about it most is it does exactly what it's supposed to do. It keeps my oil temps down considerably and keeps it there.
@boogie1354 5 ай бұрын
Good grief what a project. I'm going to get the regulator mounted ultra cooler for my 08 ultra classic.
@tommartin7026 5 ай бұрын
I have ABS breaking on my 2017 Heritage Softail, what do I do ?
@T5M_Snake 3 ай бұрын
I have a 15 heritige abs to I think they have a side mount one for abs equipped bikes
@wallywire 6 ай бұрын
Thanks for the explanation. I couldn’t find the 1” not that is included in new oil filter adapter. Video helped.
@Riker-eq2yv 6 ай бұрын
I was surprised that this video lacked more details than most of your other video’s do. You should have done a step by step installation with better lighting
@dalesimpson7872 6 ай бұрын
Can you order the ultra cool for a twin cool Harley, without the electric fans?
@dorothytipton1974 6 ай бұрын
Oh and get the harness from Harley it makes it simple and professional
@dorothytipton1974 6 ай бұрын
Installed mine and love it it didn’t get hot enough to kick on but once but I was in no traffic can’t wait to try it in pigeon forge traffic
@highwayprisoner538 6 ай бұрын
Use Dremel
@998goon2 6 ай бұрын
You guys need to put in bigger writing on your website that the newer dynas need that 6 pin connector. Now I have a oil cooler with fans that don't work because I didn't know if need that aswell. Not happy right now. I would have happily purchased it if I knew but it's in a small section labeled " you might need aswell" well geuss what I didn't know till iam working on my bike and installing it.
@998goon2 6 ай бұрын
My bad I found where to splice but still I would have rather just bought the connector.
@freddychico3621 6 ай бұрын
I wonder if you could put one in both lowers?
@SimpleMistaken 7 ай бұрын
Is there a version how I can set it up with an on and off switch? I stunt my bike and when I’m in the stunt lot I want to be able to turn it on. Also what’s the amp draw?
@steikio1 7 ай бұрын
Which direction does the spring go in?
@wallywire 7 ай бұрын
What is filter torque to?
@KarlStein-mc3dg 3 ай бұрын
15ft lbs or 20.34 nm
@302BAGGER 7 ай бұрын
I installed 1 on my 21 roadking I don’t think there is enough pressure with a stock filter to push all the oil to the heads
@francotuggs6759 8 ай бұрын
Very nice mate..that motors gonna go along way.
@frank-696 8 ай бұрын
Rather have the 5 bikes i can use, than one that i CANT. FACTS!
@dacaveman8046 8 ай бұрын
What fairing is that
@bradrichardson8020 8 ай бұрын
Did you have to remove battery cables prior to pulling fairing apart?
@JeremyLeech 8 ай бұрын
I've got the same bike!
@randycoons1808 9 ай бұрын
Just ordered mine today! I have a 2018 ultra limited with built 124. Can't wait to get it installed !
@N0N4m3333 6 ай бұрын
And how do u like it?
@randycoons1808 6 ай бұрын
I have it installed, took about 5 hours the install went good, not bad at all. I have about 700 miles, so far with zero leaks, or problems. I've been out on some warm days in the upper 80's, in some stop and go traffic and havnt had the fans kick on yet. The overall temp of the engine is much lower, and is noticeable. I have the twin cooling on my bike along with the ultra cool, so I'm hoping I'm covered on overheating. Never had a problem before, just some extra assurance.
@N0N4m3333 6 ай бұрын
@@randycoons1808 Got it! Thanks a lot for your response - didn't expect that tbh :)
@VictoriaPatnode 9 ай бұрын
Go my bro! ❤
@randycoons1808 9 ай бұрын
What about when cruising on a warm day and the fans are not running, there will be minimal air flow until the fans kick on. But if you are cruising down the road the fans will not be running most likely due to air flowing threw the cooler. But that air will be hotter than the air that would pass threw the door without the cooler mounted there. Wouldnt that make it very uncomfortably warm for my left leg? I usually allways have the door open for fresh air on my left leg and boot cause its needed so my leg dont bake. Thats my only concern with this mod.
@stever1004 9 ай бұрын
why not provide that plastic piece replacement already cut with a kit? just make a mold out of fiberglass or get plastic from overseas, so it can be as simple as pop oem off with putty knife and re-glue new piece with tape. I'd rather pay a some extra for that then tinker around with saw blades, box knives, markers, etc while the lower is sliding all over the table. would just make more sense to me
@freddychico3621 7 ай бұрын
good point
@eernation 3 ай бұрын
Agreed, huge potential for blood being spilt with this mod
@pjackson239 9 ай бұрын
Junk.
@norse2459 10 ай бұрын
Have you done any before and after temperatures to show reduction in temp? Do the fans run all the time or by temp gauge? What about the air flow to your legs since that is blocked? How does one keep the outside fairing finish from being scratched given all the required modifications?
@ralphwood8818 10 ай бұрын
These filters are pretty but the stock filters clean oil better.
@randycoons1808 10 ай бұрын
Excellent video, definitely something I'm going to do. I just recieved my ultracool 3.0 cooler kit yesterday.
@richardschaffling9882 10 ай бұрын
Personally I think it is ugly and won’t it blow hot air on your leg
@kristianestby1510 10 ай бұрын
What about 4 pin
@kristianestby1510 10 ай бұрын
Wheres the wiring