Shame you didn't show the bit I needed lol, was hoping to see you replace the other end of the return pipe
@fixitorstripitGardenmachinesКүн бұрын
Sorry about that but thank you for watching.
@TonyAFC857 күн бұрын
I’m looking at this mower on FB Marketplace for £115 and I’m wondering if that’s a good deal and would you recommend this mower?
@fixitorstripitGardenmachines7 күн бұрын
To be honest it would not be my ideal mower for that price. Honda's are a lot better . Thanks for watching.
@grasscutterpalmer374619 күн бұрын
hi neil long time no see and everyone loves a free mower good to see you got it running profit all the way 👍👍
@fixitorstripitGardenmachines16 күн бұрын
Cheers Tim thank you for your comment and for watching. Have a few things going on at the moment but hope to be back soon.
@Turningwrenches85Ай бұрын
Nice gardening work neil sir
@fixitorstripitGardenmachines24 күн бұрын
Hi thank you for watching. I'm hopeing to get back watching everyones vids soon.
@Turningwrenches8523 күн бұрын
@@fixitorstripitGardenmachines you're welcome Neil hope you're doing well
@michaeldominy20842 ай бұрын
Hi, any idea why the pull start only works when it’s not tightened .?
@fixitorstripitGardenmachines2 ай бұрын
Hi not 100% what you mean but you came ormally get a full pull cord replacement cheap on ebay.
@samuel961002 ай бұрын
Enjoyed video mate thanks
@fixitorstripitGardenmachines2 ай бұрын
Cheers and thank you for watching.
@STTC2 ай бұрын
What’s it like on an unsocked toe Neil 🤣🤣🤣🤣 Absolutely awesome
@fixitorstripitGardenmachines2 ай бұрын
Lol you would loose it. Thanks for watching.
@gravelyman2 ай бұрын
That's a pretty thick brush. But not good for stripping paint. Thanks for the review Neil. Cheers my friend 🔧👍
@fixitorstripitGardenmachines2 ай бұрын
Cheers Artie. It was worth a try. Thank you for watching.
@alandykes25192 ай бұрын
Hi Neil i got one of them and had to do exactly what you did make it fit they are great on really thick brush cutting 👍👍👍👍
@fixitorstripitGardenmachines2 ай бұрын
Very true. I was hopeing it would get rid of the paint. Thanks for watching.
@tinkeringtaylor30532 ай бұрын
Hi Neil, just watched a advert about these, but i wasn't sure about them, then boom you pop up dementrating one, thank you for sharing your thoughts about them 👍
@fixitorstripitGardenmachines2 ай бұрын
Cheers Nev ,great comment. It was ok for moss and dirt but it couldn't touch the paint. Thanks for watching.
@tinkeringtaylor30532 ай бұрын
@@fixitorstripitGardenmachines Neil were did you get this from, just showed the wife this and she said it would be good for removing the moss down the garden path
@STTC2 ай бұрын
OWW!!!! 🤣🤣🤣🤣🤣 Brilliant Neil,,,,Great video buddy
@fixitorstripitGardenmachines2 ай бұрын
Cheers Steve. The owner reports it works great .And thank you for watching
@batterylife1232 ай бұрын
Result again, from a old machine, it's always good having spares about, great video. 😊
@fixitorstripitGardenmachines2 ай бұрын
Cheers i really wanted to get it going for him. Turned out ok. Thanks for watching.
@thegeordiefellwalker88782 ай бұрын
hopefully he's got thin fingers 😊👍
@fixitorstripitGardenmachines2 ай бұрын
Lol hes got it back now and was please its all working and is cut the fins hinself. Thanks for watching.
@alandykes25192 ай бұрын
Nice fix there Neil good job you still had your old one 👍👍👍👍
@fixitorstripitGardenmachines2 ай бұрын
Thank you. The owner said the fix was fine and he would cut the plastic no probs. Cheers for watching.
@gravelyman2 ай бұрын
Hello Neil l. Good job getting that carb to work. Great video my friend 🔧👍
@fixitorstripitGardenmachines2 ай бұрын
Cheers Artie i got there in the end. Thank you for watching.
@tinkeringtaylor30532 ай бұрын
Great modification Neil, i got given a generator a while back, i can not work out the carb on it or find a new, when i type in the carb number it gives a carb totally different to the old one 👍
@fixitorstripitGardenmachines2 ай бұрын
It was hard to try and find one so i give up ,then remembered to old strimmer. Cheers and thank you for watching.
@MavisTheDrone2 ай бұрын
Neil, your audio is still low. Maybe a clip on mic would help.
@fixitorstripitGardenmachines2 ай бұрын
Hi my gopro has had its last outing lol. A clip on mic is in the post to me as we speak. Thanks for watching.
@الواثق-س8ب3 ай бұрын
لم يعمل بصوره جيده دفع الماء ضعيف
@fixitorstripitGardenmachines3 ай бұрын
it work fine the water bucket was running low thats all. Thanks for watching.
@Turningwrenches853 ай бұрын
Nice work neil on the fuel line replacement
@fixitorstripitGardenmachines3 ай бұрын
@@Turningwrenches85 cheers these machines are a little tight on space. Thanks for watching.
@STTC3 ай бұрын
I’m looking at getting one of these Neil, haven’t quite decided which to go with yet,,,,lol,,,, Never read the instructions EVER 🤣🤣🤣 throw them away,,, my channel rule lol. Nice O ring set brother. Great video buddy
@fixitorstripitGardenmachines3 ай бұрын
Thanks Steve. They are ok for small jobs . Glad you enjoyed and thanks for watching.
@STTC3 ай бұрын
That wasp was after some tasty Neil arm 🤣🤣🤣. I always expect these things to spring apart apart and take your nose off 🤣🤣🤣. GREAT RESULT!
@fixitorstripitGardenmachines3 ай бұрын
Cheers Steve. I'm always on edge when fixing recoils. Thanks for watching.
@bitealarmtones31043 ай бұрын
Perfect fix, just o rings was the problem. Great vid as always 😀😀
@fixitorstripitGardenmachines3 ай бұрын
Cheers Ant yep seems a bit daft to ship them out like that. Thanks for watching.
@gravelyman3 ай бұрын
Good job on the jet washer Neil. It seems to be working pretty well now after the repair. Cheers my friend 🔧👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers Artie yes it run ok now. Ok to use on small jobs. Thanks for watching.
@alandykes25193 ай бұрын
Nice one Neil I've got a worx one they are ok for small jobs i use mine for washing the bins out 👍👍👍👍
@fixitorstripitGardenmachines3 ай бұрын
As you say they are ok for small jobs. Thank you for watching Alan.
@tinkeringtaylor30533 ай бұрын
Hi Neil, good build up, my friend has something similar to that i think its a worx 🤔he uses it to wash his mountain bike and he swears by it 👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers Nev. its ok for blowing mower over now it works. Thanks for watching.
@kornstar19883 ай бұрын
Mines is doing this where it runs for about 10 seconds. So frustrating
@fixitorstripitGardenmachines3 ай бұрын
The fly wheel magnet was badly wore due to a person who messed with the coil. Thanks for watching.
@gravelyman3 ай бұрын
Nice job installing the pull cord Neil. It's going to be a good mower so far my friend. I'll see you in the next one. Cheers 🔧👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers Artie. I will have a look at the deck next week. Thank you for watching.
@kevinsadler17323 ай бұрын
Hi . Did you fix it after ?
@fixitorstripitGardenmachines3 ай бұрын
In the end yes. They fly wheel magnet was badly wore due to a person who messed with the coil. Thanks for watching.
@glynrogers10183 ай бұрын
Hi table you are using i have got the same do they fold up flat the legs are very rusty on mine
@fixitorstripitGardenmachines3 ай бұрын
I did a video on it .kzbin.info/www/bejne/pmjOYq2Klptrprs Thanks for watching.
@alandykes25193 ай бұрын
Nice one Neil great buy they are good engines them Briggs quantum 👍👍👍👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers it was worth a tenner just for the engine. Will have a look at the deck soon. Thanks for watching.
@tinkeringtaylor30533 ай бұрын
Well done Neil, it lives and sounds good 👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers Nev. I will see if the deck can be saved. Thanks for watching.
@tinkeringtaylor30533 ай бұрын
@@fixitorstripitGardenmachines hope its repairebul Neil
@thegeordiefellwalker88783 ай бұрын
looks a decent little engine 👍
@fixitorstripitGardenmachines3 ай бұрын
Cheers i mainly bought it for the engine. Thanks for watching.
@cwmannchi6013 ай бұрын
Lol with the magnetic tray, that machine looks a beast, plus a good buy too.
@fixitorstripitGardenmachines3 ай бұрын
Thought the tray would make you laugh. I will have a look at the deck next . Thanks for watching.
@kevinread17943 ай бұрын
Good fix if the deck is shot you have a good engine for another project
@fixitorstripitGardenmachines3 ай бұрын
Cheers. Yes i only bought it for the engine. Still got to have a look at the deck. Thank you for watching.
@STTC3 ай бұрын
Brilliant buddy, a happy ending
@fixitorstripitGardenmachines3 ай бұрын
It works well now cheers Steve. Thanks for watching.
@STTC3 ай бұрын
Great video brother,,,, what a pain not having the parts!
@fixitorstripitGardenmachines3 ай бұрын
Cheers i learnt a lesson from that one lol. Thank you for watching .
@batterylife1234 ай бұрын
Nice fix, they look figgley to do, great job, interesting vid,😊
@fixitorstripitGardenmachines4 ай бұрын
Cheers it was a bit tight in places but it runs well now. Thanks for watching.
@tinkeringtaylor30534 ай бұрын
Excellent job Neil, you have bought it back to life 👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers Nev. I just wanted to see if i could get it to run. Shame its worth more as parts. Thank you for watching.
@alandykes25194 ай бұрын
Great job Neil thumbs up mate 👍👍👍👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers Alan Thank you for your comment and watching.
@kevinread17944 ай бұрын
Good fix nice to see the videos keep it up
@fixitorstripitGardenmachines4 ай бұрын
Cheers Kevin. I'm getting back into it now i'm settled in Wales. Thank you for watching.
@gravelyman4 ай бұрын
Great job Neil. It's a winner. I enjoyed the video my friend 🔧👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers Artie glad i managed to sort it . Thank you for watching.
@stumpyssmallengines4 ай бұрын
nice to see you still at it
@fixitorstripitGardenmachines4 ай бұрын
Hi Stumpy hope you well. I'm getting back into it now i'm stettled in Wales. Thank you for watching .
@Turningwrenches854 ай бұрын
Congratulations neil on 500 subs , 👏
@fixitorstripitGardenmachines4 ай бұрын
Thank you onwards and upwards Thanks for watching.
@gravelyman4 ай бұрын
I'm glad to see you have some work there my friend. I'll see you in the next one 🔧👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers Artie. The part for the blower came today so i'm doing a video at the moment. Thanks for watching.
@alandykes25194 ай бұрын
You win some you lose some that's life nice try though Neil plenty coming up looking forward to it 👍👍👍👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers buddy i managed to get the part cheep so not alls lost. Thank you for watching.
@starsnstuff8424 ай бұрын
I bought the same model of machine,it ran Ok straight out of the box but after a few weeks it suddenly refused to start.😡 I isolated the problem to lack of spark and had to replace the ignition coil. The coils aren't that expensive and are easy to fit but it was still a bit annoying to say the least. It has been running fine for a couple of weeks now so heres hoping it won't give me anymore grief for a while.
@fixitorstripitGardenmachines4 ай бұрын
Mine has been running well now and its done a lot of work. Thanks for watching
@tinkeringtaylor30534 ай бұрын
Working it out Neil buy parts for the blower probably work out at a big lost, but that mower would make a good project deck just looks like paint loss 👍
@fixitorstripitGardenmachines4 ай бұрын
I agree about the blower but i might just get it working for the channel then brake it for spare, worth much more. I will start on the mower soon. cheers Nev
@STTC4 ай бұрын
My favourite colour too! looks great Neil
@fixitorstripitGardenmachines4 ай бұрын
Cheers Steve. Its working fine after the carb was tuned. Thanks for watching.
@DIYVariety4 ай бұрын
i agree with artie, nice on neil
@fixitorstripitGardenmachines4 ай бұрын
Cheers buddy i will do a review in six months,Thanks for watching.
@gravelyman4 ай бұрын
Great score for a nice price Neil. Good video my friend 🔧👍
@fixitorstripitGardenmachines4 ай бұрын
Cheers Artie. Reviews every six months, see if its as good as the Mitox. Thanks for watching.