Hi bro! I decided to paint white parts in metallic silver. Because these are not in sale. Only in china sets(
@cikatrizoficial29 күн бұрын
Where and how can I buy?
@frdesign303429 күн бұрын
HI ! cults3d.com/en/3d-model/various/logitech-g29-27-quick-release-car
@Nickman131329 күн бұрын
Was so confused as to the nerf but now I get it great build thank you for the video.
@DREDD_BOTАй бұрын
I do the same thing with painting Legos for my car mocs I have two Impala lowriders which are Chrome silver and green which are 8 wide. another thing I do also is windshield tinting for Lego. But this is absolutely awesome 💯🔥 I subscribed keep it up.
@user-ww5dn8ck8rАй бұрын
Amazing
@thattaco138Ай бұрын
How much?
@frdesign3034Ай бұрын
I don't sell the finished product, I sell the 3D model and instructions for doing it at home at the following link cults3d.com/en/3d-model/various/logitech-g29-27-quick-release-car
My custom wheel isn’t working when I try passing the connection via the vga connector and the Logitech steering buttons get glitched in AC. Did you have the same problem ?
@frdesign3034Ай бұрын
hi, honestly no. I advise you to check the soldering of the wires on the VGA components.
@david85562 ай бұрын
Hi Is this working with Logitech Driving force GT?
@frdesign30342 ай бұрын
HI! I didn't understand what steering wheel it is, however my system works with the logitech g 29, g27, g920.
@user-uq8rf7ks8h2 ай бұрын
Great job, but oh god, that music is total cancer.
@phonix58753 ай бұрын
Hello Have you one for logitech g923
@frdesign30343 ай бұрын
HI! I think it also works for the logitech g923 since the base is the same.
@r3turner_3483 ай бұрын
The link for the quick release is not working...
@frdesign30343 ай бұрын
Ho appena trovato questo fantastico articolo su AliExpress. Dai un'occhiata! 44,17€ | 12 bulloni Auto Da Corsa Dello Sterzo Mozzo A Sgancio Rapido della Ruota Adattatore Boss Kit a.aliexpress.com/_EGCrFCX
@r3turner_3483 ай бұрын
Awesome work. Do you sell it?
@frdesign30343 ай бұрын
HI!, I'm selling the project at the following link cults3d.com/en/3d-model/various/logitech-g29-27-quick-release-car
@r3turner_3483 ай бұрын
@@frdesign3034 Ah okay. Btw the link for the quick release isnt working
@r3turner_3483 ай бұрын
@@frdesign3034 but there is no way to buy it from you ready or whould you do it?
@frdesign30343 ай бұрын
@@r3turner_348 Unfortunately I only sell the project with instructions to do it at home for those who have a printer but I don't know who could do it.
@r3turner_3483 ай бұрын
@@frdesign3034 okay
@MattDiComo3 ай бұрын
This is awesome! I would love to do this and print the parts on my 3D printer do you have a parts list or STL files? Would be willing to purchase srls and instructions
@frdesign30343 ай бұрын
HI! for the instructions you can find the link to buy them, they are not mine. rebrickable.com/mocs/MOC-138621/Lukas2020/ferrari-f1-sf-23-18-scale/#details.
@googleyoutubechannel85543 ай бұрын
Nice! Great video and fun lego + fdm idea. You deserve more views, hopefully this build is discovered by a wider audience. Did you try reenforcing your beams at all? I tried something similar but 3d printed abs+/pla etc are a bit weak for lego usually, I redesigned lego beams to accept very thin, cheap carbon fiber rods, just gluing them in with CA, worked amazingly well btw.
@frdesign30343 ай бұрын
HI! THANK YOU. in reality some of the components I assembled are printed with carbon filament. For example in video episode 1 the suspension rods and other gears. kzbin.info/www/bejne/mH2WeZ9orrhnm8U
@zonoskar3 ай бұрын
Do you create the 3d files yourself?
@frdesign30343 ай бұрын
HI! , yes for about 80%, the remaining 20% (more complicated pieces) I downloaded files that I reshaped and modified.
@ronsone83733 ай бұрын
Release the files please
@frdesign30343 ай бұрын
HI! maybe single pieces in the future.
@lukasrsdesign3 ай бұрын
Awesome always great to see the progress :)
@frdesign30343 ай бұрын
thank you😀 it's a long job but it's worth it, the result is fantastic. from the next episode I will start with the red pieces🤟
@lukasrsdesign3 ай бұрын
@@frdesign3034 cant wait :)
@cavaliereart4 ай бұрын
Madonna ma fai tutto te? Comunque sono arrivato dai commenti del Mighi, da oggi un tuo fan! <3
@frdesign30344 ай бұрын
Ciao grazie mille della fiducia 😀 comunque si faccio tutto da solo con il mio iphone e tanta pazienza 😀
@cavaliereart4 ай бұрын
@@frdesign3034 pazzesco! Sarai fonte di ispirazione 😍🙏🏻
@odirahasj90544 ай бұрын
Been a year, nothing happened?
@frdesign30344 ай бұрын
Hi !the process takes longer because the pieces are many and very large, however we are almost there, it should be released on April 10th
@odirahasj90544 ай бұрын
@@frdesign3034 cant wait! please update it soon, thanks
@batspideycek4 ай бұрын
I need this .stl sooo soooo badd
@frdesign30344 ай бұрын
thanks! but this .stl is not for sale
@batspideycek4 ай бұрын
@@frdesign3034 thanks
@ineedfiles5 ай бұрын
wet sand
@frdesign30345 ай бұрын
HI sorry but I didn’t understand
@ineedfiles5 ай бұрын
@@frdesign3034 you should have wt sanded it. it would smooth out the imperfections in the paint
@ineedfiles5 ай бұрын
i might have tried to start with maybe 800 grit then worked my way up to 3000 grit, and hit it with some polishing compound
@frdesign30345 ай бұрын
ok yes I understand. you're probably right, let's say that this was the first attempt, already in the ducati video I sanded with a smoothing paste and the result is better. For the next one I will try to follow your advice😀.
@Daytona3955 ай бұрын
❤
@cgood1246 ай бұрын
Hello, This looks amazing and I would like to see if I can do this, one question is there something that I could use the sim raceway wheel with this mod
@frdesign30345 ай бұрын
HI! I used the modified Logitech steering wheel and all the other steering wheels are steering wheels that I built myself with a 3D printer and Arduino as electronics. Any steering wheel that uses USB can work. the scheme in the link below. cults3d.com/en/3d-model/various/logitech-g29-27-quick-release-car
@nloubriel23366 ай бұрын
DUDE NIICE 🤩😆🥰🤗
@frdesign30346 ай бұрын
Thank you 😎
@nloubriel23366 ай бұрын
No prob Friend 🙃😊 @@frdesign3034
@jacevedo7706 ай бұрын
I saw your short and full video. Amazing work! Which USB wheels have you tried after completing this project?
@frdesign30346 ай бұрын
HI! I made all the steering wheels seen in the video with a 3D printer and Arduino.
@jacevedo7706 ай бұрын
@@frdesign3034 that’s A1. Your work encourages me to try the same.
@frdesign30346 ай бұрын
I'm happy with this I recommend you give it a try 😎😀
HI! for the front suspension I used the instructions created by @lukasrsdesign. I leave you here below the link: rebrickable.com/mocs/MOC-138621/Lukas2020/ferrari-f1-sf-23-18-scale/#details
@user-ur6kl8hz7z7 ай бұрын
Episode 3 when? Ferrari f1?
@frdesign30347 ай бұрын
H I hope soon, some pieces are very complex to print and took me a long time to model.
@antoniofranchina88355 ай бұрын
Top
@CirKuT1017 ай бұрын
The pym arrow, you put the led light inside a printed piece and screw that inside the arrow. That piece is not included in your model I purchased. Where can I find it? Can’t really make the arrow light up without that piece
@frdesign30347 ай бұрын
HI! I added the missing files to cults, thanks for your patience
@CirKuT1017 ай бұрын
Thank you so much 👊🏻
@GregoryShtevensh7 ай бұрын
I'd love to see a Logitech to Fanatec QR1 wheel. It would he awesome to put a G27 or G29 wheel on my CSL DD
@vesaka.g7 ай бұрын
Do you lose any force feedback from the wheel with the additional quick realese adapter?
@frdesign30347 ай бұрын
HI!, actually you lose force feedback slightly but it doesn't affect the capabilities of the steering wheel. the system is very solid.
@angelcc58198 ай бұрын
How much is the diameter of the QR, can this mod be used with another QR with a diameter of 70mm?
@frdesign30347 ай бұрын
HI! , the system was designed with that QR, I don't think it works with other QRs
@huguberhart8 ай бұрын
This is amazing and really tempting to modify the Lego in that way by myself. I've seen someone do subtle touchups on the light bluish gray parts with a metallic gel marker.
@frdesign30347 ай бұрын
HI! Another video is coming out in which I also paint some mechanical parts in metallic colour
@marvinharder9378 ай бұрын
Could we get the Stl for the Parts
@frdesign30348 ай бұрын
HI! they are not for sale at the moment
@ProjectADAMAndroid8 ай бұрын
episode 3 when?
@frdesign30348 ай бұрын
HI! probably before Christmas the front suspension pieces are very complex to model and print😎
@angelcc58199 ай бұрын
Did they buy the quick release, will you put it on sale or is the video just demonstrative?
@frdesign30349 ай бұрын
HI! the video is a demonstration to see how it is assembled, I have put the 3D models for sale and the list of necessary components in the video description. cults3d.com/en/3d-model/various/logitech-g29-27-quick-release-car
@Limey_33879 ай бұрын
Can you use any aftermarket wheel?
@frdesign30349 ай бұрын
HI! For now I have only used steering wheels that I created myself, but the system works with all steering wheels that can be connected to USB
@blasalarcia73199 ай бұрын
Ben fatto, ottimo lavoro. Vorrei chiederti se potresti condividere il file da modificare 🙏🙏🙏🙏 o anche acquistarlo tu stesso
@frdesign30349 ай бұрын
grazie! sto valutando di metterlo in vendita su cults come altri prodotti che mostro nel canale. cults3d.com/en/users/FRdesign/3d-models
@blasalarcia73199 ай бұрын
Bravo excellent travail. J'aimerais vous demandez ci vous pourriez partager le fichier modifier 🙏🙏🙏🙏 ou bien même vous l'acheter