It's 5/8. Plenty strong for this application.

They're close, but still smaller than the holes in the wire.

V belt pulley. I don’t know what size but there are ways to calculate the size you need based on the motor you want to use.

How much what ?

This device or machine

Works just fine. I had to run it a little longer, but the results were just as good.

I'm not it would work well with small peas. I would probably have to change the screens to finer weave. I did try some purple hull peas last summer and it worked pretty well.

Check the video with the new driveshaft installed before you criticize.

james Lundy Sorry, but no. Look on KZbin for bean sheller videos from Cecil Ray. I didn't follow his instructions exactly, but took most of my inspiration from him.

Sorry, didn't go by any plans specifically, nor did I write any down. I drew most of my inspiration from some videos posted here by Cecil Ray. Look for his bean sheller videos - he goes into more detail.

Yogesh Kayanpad thanks !!!!

Naty Dominguez it depends on the price of materials in your area. I built this one for approximately $450USD

I'm sorry but I don't think I can help with that . I'm not familiar with black gram.

No problem but thank you for replied

I'm sorry, but I have no idea what you're talking about ?

Thanks ! I used a Pyle PDA5BU receiver w/ built in amp. I bought it because it was cheap, but mainly because it was the only receiver in my budget that would fit inside of the console. I don't recommend it - leaves a lot to be desired, especially the bluetooth. The speakers are Micca MB42. I ran some 16 ga speaker wire with banana clips between the receiver and speakers. The receiver has a separate line in, so I bought a better bluetooth hub and ran it into that. It works better, but the crappy receiver still produces noise. I the receiver has a 200watt amp. Price has gone up on amazon since I bought mine.

arsenio sifontes - Hola desde Carolina del Sur. Gracias para las amables palabras!

Buen dia amigo; versu tutoria meha servido mucho. debo consfruir maquinas desgranadoras y trilladoras de maiz para mi uso...pero me fataba planos dibujos para una desgranadora de CFrijoles...ya tengo claro como hacerlo---Que bueno que Usted haya presentado la idea....se lo agradezco..

Mis habilidades en español son muy malas - no recuerdo mucho de mis clases de español. Si hago otra máquina, será mejorada. Aprendí mucho cuando construí esta máquina. El consejo más importante que puedo darle es divertirse! Buena sheets, amigo !

Not really. I mainly just looked at other examples. The biggest help was from this man's videos - cecilrayp

Not really. I mainly just looked at other examples. The biggest help was from this man's videos - cecilrayp

Not really. I mainly just looked at other examples. The biggest help was from this man's videos - cecilrayp

Thanks ! I actually just uploaded the trial run video. It did a great job. I'm going to have to replace the drive shaft and make one or two other small modifications, but I'm very pleased with the results for the first run !