Пікірлер
@daneself858 2 күн бұрын
👍😎
@sped17373 9 күн бұрын
I bought one of these super airbrushes from you, have been using for about three weeks and love spraying with it! The trigger control and response is fantastic! The more I use it, the more it makes me think: Now this is how an airbrush should be made. I'm really anticipating the release of the new 2024 Infinity and will be getting one of those.
@SprayGunner 7 күн бұрын
Glad to hear that! We should have Infinity 2024 airbrush by late October and since you're a member of our loyalty program, there will be a launch special reward available!
@sped17373 6 күн бұрын
@@SprayGunner Great--looking forward to that! I just ordered a set of the Giraldez Sketching Caps, am hoping they'll help me with seeing the needle better as well as help with gauging the distance my needle tip is from the surface I'm working on. I have a huge issue, not with my Evo, but my vision/sight. Have you got a Spraygunner email where we can discuss briefly?
@SprayGunner 4 күн бұрын
sure, reach out to [email protected]
@knightsljx 10 күн бұрын
It's 2024 and how the heck is this still a thing where the drain valve is in the worst possible place. Why hasn't anyone make a tank where the bottom is angled towards the front with the drain valve is at the front at an angle that makes it easy to drain every time after use. Or making a tank out of some other material like aluminium that doesn't rust or have protective inner coating. It will be more expensive but you'll get much much longer use out of your compressor and easier/less maintenance
@SprayGunner 7 күн бұрын
we're working on an aluminum version now. Not rushing it because it will cost approximate double the price.
@jaypay5330 10 күн бұрын
What colors are those really nice Chrome and Red
@carlkandetzki9077 11 күн бұрын
I can't wait to try I buy stuff from your eBay store
@bluegrasscrazy7307 12 күн бұрын
Also laying out the parts in the order they go back into the gun would help us to reassemble the airbrush...
@PeterAgostiniJdcap26 12 күн бұрын
Good review 😎👍
@rak_na_gore_svisnul 12 күн бұрын
🎉German quality - made by Turkish hands🤣at the factory
@SprayGunner 12 күн бұрын
There are all sorts of hands there ;)
@GenuineRage 12 күн бұрын
looks like someone doesn't understand the difference between design and assembly 😂😂 yikes
@skue352 14 күн бұрын
That stencil you used. Where did you pick that up?
@SprayGunner 12 күн бұрын
Made it special for NOVA open, we will have it available on SprayGunner.com soon
@bigworm6635 17 күн бұрын
I realllllly enjoy these visits to other peoples shops . Seeing the setups and all
@gunbreakerplays 19 күн бұрын
Ordered mine last night! Can’t wait to start airbrushing!
@H_Depot 19 күн бұрын
Артем , приветствую) Давно переехал во Флориду?
@SprayGunner 12 күн бұрын
Yeah, he’s here for a while
@timwagster9458 24 күн бұрын
I searched for "airbrushing leather dye" and this video was suggested. Since watching this one, I am very glad I did not purchase the Harbor Freight airbrush complete kit. This video led my to Barbatos Rex and many other channels that recomend Spray Gunner for airbrushes and supplies. Now I am a subscriber and plan on watching more Spray Gunner videos. Thank You for sharing the your travels and products. 👍😁
@SprayGunner 12 күн бұрын
Thank you!
@Jayden-bz7nv 27 күн бұрын
What do i do if my nozzel on the airbrush is broken inside and i can't get it out?
@boobizzy863 Ай бұрын
😂😂 you guys are awesome!
@jamiedriscoll5411 Ай бұрын
Thanks guys! Old video, but I just purchased the ps-290/ps-270 combo and I am extremely impressed. It’s great to have an affordable high quality option for detail, priming and varnishing all in one package. The trigger brush is easy on the hands too
@SprayGunner Ай бұрын
Great to hear! Thank you for your business!
@PopsiccDesigns Ай бұрын
Can you apply waterslide decals on top of Createx paints? Wouldn't the water interact negatively over the water based paints (4053 gloss and such)?
@SprayGunner 29 күн бұрын
You can, after 4053 is fully cured (48 hours)
@gaetanoesposito658 Ай бұрын
Ciao. Ho una domanda da farre visto che siete i miei fornitori. Sul mio H&S Ultra 2024 posso montare gli stessi Aghi, Duse e Cappuccio aperto dell' Evolution CRPlus due in uno? Se si come faccio ad aggiungerli al carrello (dove trovo i codici degli articoli) e poi chiudere l'ordine aperto? Gaetano Esposito da Taranto Italy. Grazie
@SprayGunner 12 күн бұрын
All parts now available here spraygunner.com/collections/parts-for-airbrush-harder-and-steenbeck-airbrush
@kArL-ij5hz Ай бұрын
Warm water works better. You only have to wait 5-10 seconds.
@DianaWard-mn5fj Ай бұрын
I still struggle with 4021 tip dry
@melbournechugging2999 Ай бұрын
Can I use my own airbrush ?
@SprayGunner Ай бұрын
Yes, Iwata, HS, Sparmax, GSI work great with this compressor
@danytalloen Ай бұрын
I just receives mine day before yesterday and thought of testing it on a cockpit... it doesn't release the air :(
@SprayGunner Ай бұрын
Please reach out to our customer service and they will take care of this for you! [email protected]
@gaetanoesposito658 Ай бұрын
Ciao. Abito in una città con 40 gradi e 50/60% di umidità. Colori Airbrush color (diluiti con acqua distillata) e H&S Ultra 2024 (che come sai ha il tappo chiuso). C'è un sistema per evitare che l'ago si secchi velocemente? Intervenire con un pennellino ogni 20 secondi è veramente snervante.. Puoi consigliarmi qualcosa da inserire nel prossimo carrello? Grazie.
@SprayGunner Ай бұрын
Yes. Try using 4021 instead of distilled water.
@edgar9651 Ай бұрын
Thanks for explaining the history and the different models.
@bigchef2112 2 ай бұрын
Beautiful
@scottyboy6269 2 ай бұрын
4012 is so bad, causes so many issues with seeding etc couldn't figure out why for longest time. All hail king 4011 and 4020! Edit: I'm holding back judgement on 4021 so far.. it definitely hasn't eliminated tip dry but my trigger feels a lot more consistent when doing repeated on off(daggers, dots etc)
@SprayGunner Ай бұрын
4021 is the new king! spraygunner.com/products/4021-createx-reducer
@boot_leg_ramen_noodle 2 ай бұрын
The model looks awesome and I am definitely adding this paint to my arsenal 👍 !!!
@ChilliwackimusPrime 2 ай бұрын
I always hear a 1:1 as a goto ratio for mixing wicked colors. It sounds to me that with this new 4021 you do not need to do a 1:1? Is that correct? Do you get the same result with 30% 4021 as you would with say a 50% mix of 4011? Thanks guys 😊
@atlmacman 2 ай бұрын
Sounds awesome. But what am I going to do with the 64 ozs of 4011 sitting on my shelf? 😂
@marcuseisenhuth 2 ай бұрын
Just use it 🤙🏻
@GenuineRage 2 ай бұрын
pour some drinks up for the boys!! 😂
@scottyboy6269 2 ай бұрын
4011 is good, it's the 4012 that's icky
@francivalterlimapereira2943 2 ай бұрын
sensacional sempre o melhor pro artistas, Createx Colors.
@sveeart 2 ай бұрын
Looking forward to trying this out once its available in the UK 👍
@airbrushfactoryoldenburg917 2 ай бұрын
Very cool, we use it in Germany too. Very good stuff!
@pat2068 2 ай бұрын
Glad 4021 has hit the shelf. Createx tech support mentioned to me a couple of weeks ago to expect this soon. I struggle with airbrushing 6013 autoborne silver on model cars. This should help me based on my discussion with Createx. Will order 4021 tomorrow.
@SprayGunner 2 ай бұрын
it will help! Thank you for your business.
@LordNerfherder Ай бұрын
Same i struggle even with 0.5 tips to use createx (4050/autoborne, rest are fine). It frequently tipdries and clogs with autoborne even with 20-25% and leaves lots of marks in the airbrush thatvsre difficult to clean. A bit of an agressive retarder would have been great to reduce the tip dry and clogs in smaller airbrushes.
@reelstrikelure 2 ай бұрын
Looking forward to trying this new product!!
@GeraldsArt 2 ай бұрын
This New Reducer 4021 is Magick✨ I already try it in my Airbrush Classes and Personal Projects and works Awesome!! “No Airbrush Tip Dry” 🤩
@SprayGunner 2 ай бұрын
Thanks, Gerald! We're happy to hear that!
@newarthh 2 ай бұрын
Sounds great Gerald! Cant wait to test it. How does it work? Special ingredients? Are they toxic? Are there certain safety precautions that must be observed? What nozzle sizes have you tried it with? What happens if more than 30% reducer is added?
@PopsiccDesigns 2 ай бұрын
You can read through the safety data sheets on the 4021 at the spraygunner website. I read through them and it looks quite safe but you should always wear a respirator when spraying paints.
@scottyboy6269 Ай бұрын
What ratio are you using? I still get tip dry
@scottyboy6269 Ай бұрын
@@newarthh it has warning label about irritant, "Methoxy propanol" definitely fan blowing overspray away from you + well ventilated is on the TDS. Obviously a mask is best Createx TDS says you can add less and get same performance as 4011..."Both 4011 Reducer and 4021 Reducer can be used with any Createx paint and are generally added to colors at the same volume, although due to its ability to improve flow and leveling more than 4011 Reducer, 4021 Reducer can be added in less volume to Createx paints." one amazing thing is "4021 Reducer can be added to any Createx paints and stored for an indefinite time period (meaning the reduced mixture can last in a good, sprayable condition for several weeks if not months) when the reduced paint mixture is capped air-tight and stored in a cool, dry environment kept away from direct light."
@skue352 2 ай бұрын
this is wonderful. More please
@Ed-Irvin 2 ай бұрын
Would you also recommend this reducer for miniature acrylic paint like Vallejo or Citadel? I currently use Vallejo thinner and flow improver with a Patriot (0.3mm), but that was just what I started with, not for any dedication to the brand
@SprayGunner 2 ай бұрын
We didn't test all the brands yet, but yes - this reducer helps other water-based acrylic paints as well.
@GenuineRage 2 ай бұрын
just ordered some. i use uvls as a binding agent for dry flaking sometimes, i imagine this would be a good use case for that so i have more time to work with the clear while it's tacky. In terms of metallic paints like wicked gold, I'm guessing this isn't ideal, right? from my experience with lacquer using slower reducers causes the flake to settle before the paint is flashed off, and im assuming it would be similar using a slower reducer for acrylics as well.
@SprayGunner 2 ай бұрын
thank you for your order! So we've tested it with several different metallics and pearls. It does delaying drying time but not as much to ruin the look of most metallics so for most it definitely makes sense. However, do not use it with ChromaAir CA200 aluminum or CA201 gold, it dulls them.
@GenuineRage 2 ай бұрын
@@SprayGunner thanks for the reply! im excited to try it out, dry tip was the biggest downside to using acrylics, but for my situation acrylics are all i can reasonably use right now. cheers!
@robertscott3399 2 ай бұрын
Pantyhose ,knee highs old go to staple. Used them in my dad's body shop . Just wash them before using them for filters and with airbrushing they will pay for them self fast
@gabriellee5928 2 ай бұрын
Thank you!! Definitely going to buy a self centering now. I’ve already had to buy 2 airbrush with the thread tip 😭.
@gaetanoesposito658 2 ай бұрын
Ciao l'ho appena comprato da voi. Avrei una domanda da farti se puoi rispondermi. Quali colori della Createx sono più adatti alle tecniche di graffiatura e cancellazione? Grazie
@SprayGunner 2 ай бұрын
Thank you for your business! Illustration Colors spraygunner.com/collections/createx-illustration-colors-all
@gaetanoesposito658 2 ай бұрын
@@SprayGunner Grazie. Purtroppo avevo anche preso gli Airbrush color. Al prossimo acquisto allora.
@furiouswings2444 2 ай бұрын
Thank you for this video, it was really helpful. xx
@SprayGunner 2 ай бұрын
Glad it was helpful!
@kevinpritchard7855 2 ай бұрын
I want to know also, where did you get those skulls? How did you make that or did you buy that somewhere? Please get back to me I love skulls.😂
@killergameshit4529 2 ай бұрын
been using mine for about a month now,,, project after project ,,, it is a POWERHOUSE.. I love it,, been blasting glow pigment through mine,, and to anyone who knows,,, it takes a lot of pressure,,, im shooting at 40 psi for hours blasting HUGE micron particles through mine,,, airbrush .8 nozzle NO NAME and compressor NO NAME tooty,.,. LOVE THESE TOOLS
@SprayGunner 2 ай бұрын
That's great to hear! Thank you for your business!
@JohnnyGearBot 2 ай бұрын
Do you have a video about the Nautilus submarine?.
@ROCKETKNIGHT-ph7xp 2 ай бұрын
where you get the skulls?
@victoralosi1461 3 ай бұрын
Nice
@MetalTimeWorkshop 3 ай бұрын
Wow 🤩 We have no words. Such a talented and soulful work. Thank you so much STEVE LEAHY and SPRAYGUNNER!
@StevenLeahyArt 2 ай бұрын
You guys are very welcome. It was my honor.
@Dude_Slick 3 ай бұрын
Yo man. I'm a big fan of your company and a repeat customer. But I have to play the devil's advocate here and point out that all airbrushes are cordless. That one also happens to be hoseless.😁
@SprayGunner 3 ай бұрын
We didn't come up with it, just using what's trending. There are very few searches for "hoseless", besides this term will be wrong too since there is actually a hose included in the set for optional use. No worries, society will survive it. Same as we did "internal mix airbrush". Trust me, there is no such thing as internal mix in any airbrush ;)
@Dude_Slick 3 ай бұрын
@@SprayGunner
@jonathanlevine4661 3 ай бұрын
what is the working time of the compressor ? Can you change out the battery when it runs out?
@SprayGunner 3 ай бұрын
2 batteries in a set, both have around 30-35 min continues run on a full charge. Since the compressor has auto-stop function (it's not working when you're not spraying), we're talking 1.5 - 2 hrs of average working time. It takes 1.5 hours to fully charge spare batter with type-c usb cable. Check it out here spraygunner.com/products/cordless-airbrush-battery-powered-compressor-with-airbrush-kit