mad max furiosa trailer reaction
3:45
VM50 Microphone Review Vegue
8:21
2 жыл бұрын
Blown plaster loose plaster
2:01
3 жыл бұрын
Ronseal Fence Sprayer Review
10:46
3 жыл бұрын
Natura Grow Unboxing
3:24
3 жыл бұрын
Ronseal Paint Sprayer Unboxing
10:50
3 жыл бұрын
hand formed soil blocks
5:00
3 жыл бұрын
week without coffee , caffeine detox
8:27
dreaming cat
1:29
4 жыл бұрын
Double plot allotment tour
3:48
4 жыл бұрын
Vivoactive hr fix attempt failed
2:36
Пікірлер
@nevertestELOHIM
@nevertestELOHIM 4 күн бұрын
How long did this take to make? Thinking of buying one
@Pullum1
@Pullum1 2 күн бұрын
Spuds probably 20 mins, chicken think around 20 - 30 min. Still use almost daily since last Feb it's a decent air fryer
@bydundarumit
@bydundarumit 28 күн бұрын
I have the same problem, how and where should I check?
@elmafudd9703
@elmafudd9703 Ай бұрын
Canon eos 5D mk2. Started after very cold snow work then rain. I have to stick it on a radiator to dry out with out the battery and she is normally ok.
@ynvch
@ynvch 2 ай бұрын
I'm gonna try this while I gather enough courage to disassembly the command block 😂
@ianpalmer4840
@ianpalmer4840 3 ай бұрын
Going through the same problem at the moment with my Canon 90d.Sent it to an authorised Canon repairer, Camera Exchange Colchester, on the 24th August for an estimate. Phoned a couple of times, still no estimate. A bit pissed off now !
@bwilliams6675
@bwilliams6675 16 күн бұрын
Any update?
@ianpalmer4840
@ianpalmer4840 14 күн бұрын
@@bwilliams6675 Hi, I finally got my camera back the second week of December. I took about a month to get the estimate, which was £300, for a new shutter assembly. I gave them the go-ahead, and they said it should be ready in a couple of weeks. nearly 4 weeks later I got a call to say it was ready for collection at the weekend. Only to have another phone call 2 days later to say the error 20 message was still there.!! Was then told it also needed a complete circuit board assembly as well, of which they would bare the cost. I have finally got it back, and it seems to working ok with a 6 month warranty on the work carried. Unfortunately not a satisfactory experience. Perhaps another time Canon direct may be the way to go .
@dontuno
@dontuno 3 ай бұрын
Rear wash wipe hose disconnected and underneath the plastic door sill trim.
@TR6Boy
@TR6Boy 3 ай бұрын
Amateur.....
@johnoneill2824
@johnoneill2824 4 ай бұрын
Wast of money does NOT WORK tubbish 💩💩💩
@jayasmrmore3687
@jayasmrmore3687 4 ай бұрын
First
@tomprice7105
@tomprice7105 4 ай бұрын
stupid
@me-ju3fv
@me-ju3fv 4 ай бұрын
You’re opening it wrong lol
@me-ju3fv
@me-ju3fv 4 ай бұрын
Why the frig would you leave the paper there lol
@Hongky85
@Hongky85 5 ай бұрын
Oh, yeah, you're right. Come to think of it, I do remember all of the rioters demanding to want to know where all of these people were going to be living.
@michaelhofmann-body5716
@michaelhofmann-body5716 5 ай бұрын
Sometimes houses have more than one person living in them. Just a thought.
@Pullum1
@Pullum1 4 ай бұрын
Good point 😅 lots of houses are now being turned into hmos and flats too
@Me-gy7yk
@Me-gy7yk 5 ай бұрын
I get this from time to time on my 1DX and have found that it usually clears up if I just pop the memory card door open, but it comes back again after a few shots. Then once it settles down, I can shoot thousands of frames until the next time...
@d.s.8968
@d.s.8968 5 ай бұрын
Mój Canon m50 po 23,750 zdjęciach uległ awarii. Jestem kolejny raz zawiedziony marką Canon... 😑
@johnoneill2824
@johnoneill2824 5 ай бұрын
A pile💩💩💩💩💩
@jeffmsc
@jeffmsc 7 ай бұрын
Did you fix it?
@stuartlanigan4622
@stuartlanigan4622 7 ай бұрын
my steamer arrived today... thanks for the video... i cooked rice the traditional way, and then, i bought a vacuum sealer... and discovered in the freezer it lasts a long time... i've eaten it 3 months old... it is literally boil in the bag rice... and no more waste. (500g - 8 minutes) i stirred it once at 5-6mins... yeah, perfect rice... but... and its a big but... you've already boiled the water... it's only 8 min on the gas.... now, im a sad old man, but gas is 22p a unit, and electric is 47p... (1 unit of gas is approx 850watts) its no faster, its maybe a bit cleaner, until it comes time to clean the microwave...
@Pullum1
@Pullum1 7 ай бұрын
Good advice I must have used this rice steamer hundreds of times by now at least twice a week over last 9 years Quick boil of the kettle and 10 mins in microwave. I use kettle to boil then microwave as it just takes away the need to monitor the water boiling on the hob comes out same every time for me 👍🏻
@davemagnani5166
@davemagnani5166 7 ай бұрын
I've been using Canon since 1976. I got a 40D in 2007, and then a little Rebel Xti for hiking, and then another 40D for a backup when doing events. I started using both 40Ds for events to keep from having to change lenses. Using 3 cameras, none of them had a lot of shutter actuations. The one time I went to a small event to shoot tethered to a laptop to immediately print the shots, I decided to leave the backup 40D home since I had to transport the laptop and 2 printers. The 40D shutter failed on the 3rd shot, and I had to use the Rebel that I kept in the car. I had to swap out the memory card to the laptop in order to print, since the Rebel doesn't have live view for tethering. It was a nightmare. I checked the 40D shutter count, and it was only a little over 8,000. Sent it to Canon, and they quoted me almost $300. I complained that it was rated for 100,000, but they said it was out of warranty. Now, my M50, that mostly sits on a tripod at the kitchen window for shooting birds, has a dead shutter. And it can't have anywhere near 100,000 actuations, and it is out of warranty. Two instances of something that should, according to Canon, have lasted much longer, warranty or not.
@mikeliszemitis8946
@mikeliszemitis8946 5 ай бұрын
It might be a power issue. When I was in Turkey they had such bad electricity it didn't charge any devices properly. Canon is unkillable, err20 without physical faults is possible. It comes on with automatic shutter adjustments. It somehow messes things up.
@joeyvega3511
@joeyvega3511 7 ай бұрын
Thanks for the video! I bought one and immediately lost the instructions, so this was helpful!
@Adeline9418
@Adeline9418 7 ай бұрын
Youre making it harder than it should be.
@chrisdodd9121
@chrisdodd9121 7 ай бұрын
Thanks ☺️
@niksgee3538
@niksgee3538 8 ай бұрын
I have just bought this claims to be 1200 watts. Only get one of each lid. No recipe book
@nisataj
@nisataj 9 ай бұрын
Does it work to make coffee powder? And do you recommend it over nutri ninja?
@Pullum1
@Pullum1 9 ай бұрын
Not sure I no longer have this blender I use a krups coffee ginger for coffee powder (also have a video review of that)
@niksgee3538
@niksgee3538 9 ай бұрын
​@@Pullum1how long did this blender last. Did you buy a different brand if so why? Just bought nutri pro 1200
@ExtremeShez
@ExtremeShez 9 ай бұрын
Thank you for the video. Some great tips.
@j7cars182
@j7cars182 10 ай бұрын
Very Informative!
@dukeyhird5604
@dukeyhird5604 10 ай бұрын
😣 'PromoSM'
@جوهرهالسيداللبودي
@جوهرهالسيداللبودي 11 ай бұрын
لم يعجبني..........سى جدا طريقه الشرح والعمل
@darrennobbs3488
@darrennobbs3488 11 ай бұрын
Hi pulham remember old video cat fight
@Pullum1
@Pullum1 11 ай бұрын
Unboxing and first look at spiralizer the various attachments. Not a demo of the product. The phone I was using cut off at the end sorry.
@pamelasandstrom4401
@pamelasandstrom4401 11 ай бұрын
How not to use a spiralizer
@mikepotts2024
@mikepotts2024 11 ай бұрын
Comes with both bits 'and' bobs, excellent, that's just the thingys I was looking for. [facepalm emoji]
@theastraykhan
@theastraykhan 11 ай бұрын
Got the exact same camera with the exact same problem. Did you manage to fix it?
@Pullum1
@Pullum1 11 ай бұрын
Was err20 which was a short circuit/ fault with the shutter unit. had to send it off to canon to repair. Was around £130
@theastraykhan
@theastraykhan 11 ай бұрын
Thanks for letting me know. Going to sort mine out. Hope it doesn’t happen again, the camera is only a year old
@Pullum1
@Pullum1 11 ай бұрын
It's annoying mine was just over 2 years old and not used a great deal either
@paigewilkins9322
@paigewilkins9322 3 ай бұрын
Was your screen turning on when this happened?
@Seanbandela
@Seanbandela Жыл бұрын
How do you fix it ?
@Pullum1
@Pullum1 Жыл бұрын
Had to send it to canon to fix as was out of warranty £130
@shirinatron
@shirinatron Жыл бұрын
Ty this helped me figure out how to use it :)
@urgentemail8690
@urgentemail8690 Жыл бұрын
Does it need to be plugged on, While its sat on raditor? My plugs are so far from radiator
@Pullum1
@Pullum1 Жыл бұрын
Yes it's powered by a plug
@urgentemail8690
@urgentemail8690 Жыл бұрын
@@Pullum1 thank u
@aapokoivumaki8567
@aapokoivumaki8567 Жыл бұрын
Its stuck because you dont have a lens on
@Pullum1
@Pullum1 11 ай бұрын
Still closed with lense on. Should be open usually
@FrancoCruzFrias
@FrancoCruzFrias Жыл бұрын
🥇 primero 1ro ,bro para que asea este video🤔
@bxgal347
@bxgal347 Жыл бұрын
I got one of these just a different brand and with a smaller veggie one and got it for $20 on Amazon and making it now. Tfs . This is the easiest way to make rice!! ❤
@angelaquizz
@angelaquizz Жыл бұрын
I'll watch it too!!!
@kevinlc74
@kevinlc74 Жыл бұрын
In the words of Eric Cartman...
@jdb19
@jdb19 Жыл бұрын
Not sure what you're reacting to here, but FURIOSA Mad Max isn't it.
@Sdavies83894
@Sdavies83894 Жыл бұрын
Me when I lose my phone:
@yekaneast
@yekaneast Жыл бұрын
I need a bruce buffer alarm clock.
@winterwolf2012
@winterwolf2012 Жыл бұрын
Please no dip hand in rice, bad for other people, use fork or chopsticks.
@adavieseng
@adavieseng Жыл бұрын
Use funnel to fill Mix water and paint first with battery Drill Clean nozzle if it clogs Use a paint brush as well Then will work like a dream
@ExtremeShez
@ExtremeShez 9 ай бұрын
Great advice, thank you. I have a bucket of water handy to keep the nozzle immersed in water so it doesn't dry out when I need to take a break or answer the front door, etc.
@reginaldgalluzzo5093
@reginaldgalluzzo5093 Жыл бұрын
✔️ "Promo SM"
@Unidentifiedddflyingobject
@Unidentifiedddflyingobject 11 ай бұрын
No