Thanks man! I'm glad you enjoyed it! 🙏

Absolutely..if you do that, it will become more rugged and good for heavier work! Thanks man, glad you liked it 🙌🏼

of course I'm not a Professional, just wanted to build my desk.. by myself.🤗 check other projects, I'm trying to do my best.. thanks for the comment 👍

Appreciate the love! Glad you enjoyed the simplicity.

Easy or difficult to build? 😅

You're right, the goal was to make it affordable with basic materials! & Show that you don't need expensive materials and tools to build such a simple desk. And even after a YEAR... it's still gonna cost around $60-$75, if you add inflation! & majorly depending on where you sourced the materials from. I can share the links of materials here if you want. For your ease.

Yes if you buy it NEW.. This is a defected/discarded piece that stores sell cheaply or throw away for recycling.. All the sides were bloated by water and damaged, So I got it for dirt cheap and made them cut at the desired size. Had to Hunt a lot for this kinda material lol & it's a year old project. Thanks brother that you liked the project 🙏🏻 means a lot 🙌🏼

Thank you 🙏🏻♥️

I'm happy you enjoyed it, I'm glad I could help! 🙏

Appreciate you brother! 🙏🏻 Thanks for the support!! Glad you liked it. check other projects, they are made in the same way with Basic tools... thank you again ❤️

Patience is a Mandatory ! thanks brother! 🙌

I agree, windows are important! It's a design choice I made for this project, because this window is just an Air duct with no view (useless for me)..and making my PC setup little awkward to view. i have another window in this room for Fresh air, greenery & sunlight with a satisfying view, same problem here bro cant live in a room without a fresh air, appreciate the feedback bro 👍

Thanks man! 🙏🏻 It's just a desk DIY, everything else is adding up in next in line videos.. and soon the complete setup video with all the peripherels and equipment/essentials will be uploaded after all the DIY projects are completed. Hope you'll like the DIY projects 🤗

If you can open your eyes & see, its a 1 year old project. check the uploading date. one year back material were little cheaper then today, but still its a $15 - $35 increase in 2025 .. (not a Massive BS) Only the table top was hard to find, I have used a discarded full board, cut to desired size, all the materials are listed in Description, with massive BS, and i am sharing some here too for your ease.. -1x2x8 Pine wood www.lowes.com/pd/Severe-Weather-Common-1-in-x-2-in-x-8-ft-Actual-0-625-in-x-1-375-in-x-8-ft-1-Treated-Lumber/50279773 8 PIECES ($22.24) -L Bracket Stainless Steel Corner Brace 16 Pcs ($6.99) amzn.to/4hnIEYP -2 INCH CASTER WHEELS (Pack of 4) ($8.30) amzn.to/40l8i9S -271 PCS High Hardness Black Wood Screws Assortment Kit ($5.78) amzn.to/4hf70ER -Premium Wood Glue [to glue & make filler with wood dust] ($4.38) amzn.to/4jpoWy2 -Paint, Half Pint, Gloss Leather Brown ($11.55) amzn.to/4g2Lr8L -8ft x 4ft Plywood or MDF Sheets 1/2in or 15mm Wood Board ($16-35 ) NEW!! (I used the discarded one) That's how the price goes even more low, & You can search through eBay, fb market place, plywood wholesaler, or a hardware store who usually have (used or discarded pieces) that is more (Cheaper & affordable) -same for Cable Duct, you'll find cheaper in local stores or order it from AliExpress. these prices are little higher bcuz of sourcing platform, you can find everything way more affordable and cheaper from local store or a whole sellers or from AliExpress. etc etc i hope it will help you Massively :) cheers

THANK YOU!

🤦🏻 These are 1x2s, Need proof with scale/measuring tape?

​@@LEOKHANYes, please, that would be great! Thanks. Super cool project, and thanks for making it easily with common/easily accessible tools. Visual confirmation on board length/width/height would be the icing on the cake. Those boards do look a bit larger than 1x2 boards, but just barely. Are they 1x2 boards at face value, or is that actual/cut size?

You are welcome brother. Happy to see you liked the project. Kindly Come on IG. I'll share the complete size with a measuring tape, It's a camera view that makes them look a little thicker, these are exactly and precisely cut 1x2s not barely but accurately cut 1x2s. Different angles of capturing the video make them look slightly thick. I will be more than happy to share visuals and pictures with complete measurements, kindly DM me.

CS for life ✌️

typo- "typographical error" 🙏

😂 I think I've built a chassis lol

haha that was the purpose of this video... so every one, literally everyone can build it.. take your time lol hopefully you will build it 😂✌️

Ese era el objetivo principal de este video, hermano. ¡Pruébalo, anímate! Vas a disfrutar el proceso.✌️

The chassis type structure will be loose because of 1x2s. If you use 2x4s then both right & left legs can be connected by screws only. Then the upper structure can be dismantled. It will become a 3 part structure. But still you can move it easily because of it's dimensions, I move it to another room whenever I want to build something at that place. It won't get stuck in doorways, but for small tight turns yes it can be a little difficult. It's like a sofa's dimension but not that thick & heavy lol

Of course I won't take it apart. It's all welded by glue lol 😂 That's why I installed the wheels because I move it from time to time to build more things in the same place. Check the latest project it can easily go room to room .

@LEOKHAN you won't, but someone else building it may need to. People often move and that thing won't fit through most doorways with tight turns

i understand what you are trying to say, that's why its dimensions are specifically been measured and cut to be moveable easily even from a narrow doorways and rooms. the design is thought out and planned before building it for a general and normal house/ rooms. if the room is seriously tiny and have tight turns then you can shrink the size according to your place. its a design that can be easily adopted to different sizes from 4ft to 10ft according to your need :) no need to dismantle

You got it! I’ll make sure to use a more descriptive vocabulary & spellings next time. 👍 Thank you & This glue is a bulk pack to fill in bottles.

Thanks broo!!! 🙏🏻♥️

Actually that's an old school ON/off drill with 1 speed only. Can't use screw driver bits in this drill. Yeaahh had a good forearms workout, full pump 💪🏼😂 Thanks brother I'm glad you liked it.🙏🏻

Thank you brother...i Appreciate your honest comment 🙏🏻

Thank you! ... Must try ✌🏻

Haha Lol yess! It's a good forearm exercise 💪🏼😂

Welcome aboard my Argentinian brathaaa! 🙌 yes sadly subscribed fellas are little less, but thank God and my subscribers.. its going alright 🙏 thank you for subscribing bro.. I hope i will make you build something too 😂 Gracias de nuevo! más proyectos están en camino...

Lol 4-5 hours bro with a lunch break 😂

thanks brother.. its a 1 year old project bro. check the uploading date. one year back material were little cheaper then today, but still its a $15 - $35 increase in 2025 .. (not $200 lol) Only the table top was hard to find, I have used a discarded full board, cut to desired size, all the sides were bloated and damaged so i got it cheaper .. all the materials are listed in Description, and i am sharing some here too for your ease.. -1x2x8 Pine wood www.lowes.com/pd/Severe-Weather-Common-1-in-x-2-in-x-8-ft-Actual-0-625-in-x-1-375-in-x-8-ft-1-Treated-Lumber/50279773 8 PIECES ($22.24) -L Bracket Stainless Steel Corner Brace 16 Pcs ($6.99) amzn.to/4hnIEYP -2 INCH CASTER WHEELS (Pack of 4) ($8.30) amzn.to/40l8i9S -271 PCS High Hardness Black Wood Screws Assortment Kit ($5.78) amzn.to/4hf70ER -Premium Wood Glue [to glue & make filler with wood dust] ($4.38) amzn.to/4jpoWy2 -Paint, Half Pint, Gloss Leather Brown ($11.55) amzn.to/4g2Lr8L -8ft x 4ft Plywood or MDF Sheets 1/2in or 15mm Wood Board ($16-35 ) NEW!! (I used the discarded one) eBay, fb market place, plywood wholesaler, or hardware store who usually have (used or discarded pieces) that is more (Cheaper & affordable) -same for Cable Duct, you'll find cheaper in local stores or order it from AliExpress. these prices are little higher bcuz of sourcing platform, you can find everything way more affordable and cheaper from local store or a whole sellers or from AliExpress. etc etc i hope it will help :)

@@LEOKHAN Wow! Thanks for the amazingly detailed video with included links to products. 👏🏼😁

You are welcome brother..🙌🏼 I'm always here to help & guide, any time brother! Happy to see that you liked it and enjoyed the process...✌🏻

based on the region and sourcing material from right market place. links are in the description. :)

@@LEOKHAN No, your numbers are total BS for people in the US and pretty much any other "region". These are NOT "1x2's". They are 2x4's. ONE 2x4x10 would be $14 and you'd need several. The MDF for the top would be $20-25. The link to the casters in your description are $16-20. Screws are $7. Ratcheting screwdriver is $13. Hand saw $10. Tape measure $10. Super glue $10. Wood glue $5. Paint scraper $8. Drill $40. Vinyl $8. Gloves $6. Masking tape $7. Crimping tool $13. Wire stripper $9. Paint $10. PVC $10. In other words, about $200+ using your list, just like I said. Yes, you have a disclaimer but there is NO WAY this is a $50 project for 99% of the people viewing it. Not US dollars anyway. It's a good enough project that you don't need the clickbait BS title claiming that it's a $50 project. Just be honest and it's still a good project/video, but when you misrepresent it like this, don't be surprised when you get called out.

Kindly read carefully, the amount/cost is of materials, (just lumber & it's parts), not the tools required, who adds tools amount to the project lol...may be it BS to you because you are unable to understand that it's made by household tools that are always available in every home, that's why it's said build it with basic tools. & You are calling 1x2s a 2x4!?!? Lol what? If you can't even see the difference between 1x2 & 2x4 then I'm sorry I can't argue on that, if you want a physical proof, plz come on IG I'll share it's measured pics for you and will show you the dimensions with a ruler & measuring tape specifically for you, And kindly go to Lowe's store & ask them for 1x2 yellow pine if you live in states. Before calling these numbers a BS, You can check online too, & you need 8 pieces It's easy to open the mouth rather than researching first brother, 10-11 months ago that lumber was under $2 a piece & after about a year it's still rite now is, under $3 a piece & you needs 8 piece total. So do the math again, And yes it's in US dollars buddy I'm not building it from a cave or something, I hunt for that MDF a lot it took time to find that discarded piece that I made them cut into a usable size, if you can't move & find this then you can find plywood+veneer or use a stain/ coloured varnish after sanding it & you will get the top under that amount if you want to build it seriously. Even After a year, yes there could be $10- $15 US dollars difference rite now, but not what you are counting and calling a BS numbers. Be my guest I'll guide you through these BS numbers, and I'm always here to correct your misguiding & click bait CLAIMS.. No offence brother, but your comment feels like written in Anger or something that we didn't get it... Kindly take a deep breath and check again, if you are facing any issues, I'll help you find all the materials if you Wana build it.... (Not tools!) 🤦🏻

-1x2x8 Pine wood www.lowes.com/pd/Severe-Weather-Common-1-in-x-2-in-x-8-ft-Actual-0-625-in-x-1-375-in-x-8-ft-1-Treated-Lumber/50279773 8 PIECES ($22.24) -2 INCH CASTER WHEELS (Pack of 4) ($8.30) amzn.to/40l8i9S -271 PCS High Hardness Black Wood Screws Assortment Kit ($5.78) amzn.to/4hf70ER -Premium Wood Glue [to glue & make filler with wood dust] ($4.38) amzn.to/4jpoWy2 -Paint, Half Pint, Gloss Leather Brown ($11.55) amzn.to/4g2Lr8L -8ft x 4ft Plywood or MDF Sheets 1/2in or 15mm Wood Board ($16-35 ) NEW!! (I used the discarded one) eBay, fb market place, plywood wholesaler, or hardware store who have used or discarded pieces that is more (Cheaper & affordable) -Even after a year its still a $15 - $30 increase depends on your selection not a $200 BS numbers 🤷‍♀️ what else do you need Bro ?

🙏🙌

🙌🙏

you are welcome bro, I'm glad you liked it! 🙏

All the measurement details are in the video, & in the description ✨

because its just an old ON/Off... 1 speed Drill, not a variable speed one. that's why screw driver bits cant be used in this drill..

I'm glad it was helpful to you!!! Yes go for it... You are gonna enjoy building it.. & you are welcome brother 👍🏻

Thanks man! I'm glad you liked it! 🙏

Thanks man ... Yes I know him, he does cool things.. but I'm trying my best man!! In my own way, Many projects are in-line rite now, and Learning step by step, project by project..

@ oh maybe my words came out wrong, I did not mean to sound negative, just wanted to give you more food for thought! Keep up the great work! Are you using home assistant already?

Oh no no brother.. I didn't take that negatively, your suggestions are high appreciated brother 🙌🏼🖤 I just expressed what I was doing right now.🤗 Currently I'm not using that automation, all is manually operated, I will integrate some products in the future....

Don't they sell straight 1x2 lumber ?? You should buy a 1x6 or 1x10 boards & Made them cut into 3 or 5 pieces.. They are pretty straight, I think..

You are welcome!!!!!!!! I'm glad & so Happy to see that ♥️

In this sorcery I had to use some clamps.. lol 😂 Masking tape can't hold them tight enough to staple em .. still they are basic tools

Thanks bro, I appreciate the comment! 🙏

😂😂♥️

I know what you mean brother, but I wanted to keep it simple and affordable with household basic tools only! 😉 Not everyone has a kreg jig, that's why I used simple steps. Thanks for the comment brother 🙏🏻 have a look on my other projects too ....

Thanks brother 🙏🏻 thanks a lot. I'm glad you liked it.. and yes your suggestion is perfect for these types of windows, but this window is actually an air duct window. Unusable for an emergency exit or natural light. I have a 2nd one with a view or right side, that's why I blocked this one, Your suggestion of a slider slat wall is just PERFECT 👌🏼 I will surely use it in another place when needed. Thanks man!! Your appreciation means a lot! 🙌🏼