I have the Dgi Mini 3 pro. why do i have to Calibrate the IMU before every flight?
@naturaljah10023 күн бұрын
Hey I would like to ask you a question about power injection blocks that would work with the controller ?
@josephfutch1467Ай бұрын
Sounds good now bro
@AuntySlayer30004 ай бұрын
at the 3:21 if you pause, you can see missing components on the board.
@talons78124 ай бұрын
As soon as I saw your solar setup, I subscribed instantly! 👍
@Mrcccpown6 ай бұрын
You did an amazing video, I’m adding interior lights into my tesla model Y and this is much superior than a blue ghozt controller. Where do you attach the wifi antenna to?
@dangerdavefreestyle7 ай бұрын
looks like a great little bit of kit and better than guessing. one of the many ways to confirm. a tip besides dont smoke in bed or dont look at the sun directly would be to try turning your phone sideways when filming.
@jackhibbleriii7 ай бұрын
For sure. This video was intended to be a short, nevertheless it decided to be a video. That’s the error in the format. I also post on Facebook under the same name. I post there daily. Look for the blue check mark. Thank you for taking the time to comment.
@johnq.public26217 ай бұрын
🤖 Neat! 📸
@michaelboyle19837 ай бұрын
Thanks for the video, and God bless you!
@jamiejones69947 ай бұрын
Ive NEVER seen a northstar that didnt overheat period
@jackhibbleriii7 ай бұрын
Or had pulled head bolts..
@davidsizemore14527 ай бұрын
Can do the same thing by watching for air bubbles if you leave the radiator cap off before cranking.
@Deezarehairy7 ай бұрын
Actually that's not accurate My vs commodore has a bubble here and there. That why the engine has a air bleeder. If you don't get every bit out. The bubbles travel What your referring to is when its extremely bad and forcing water out.
@jackhibbleriii7 ай бұрын
Sorry Dave. I have to agree with Sackdan on this one as well. Some vehicles just crest air because their thermostat is either at the bottom or the motor doesn’t freely circulate a small amount of coolant to burp the air out sort a speek. I usually use an Airlift to vacuum the air out. Then the tool kit uses a special hose to draw the coolant into the vehicle. I can certainly make a video of that if you would like.
@Deezarehairy7 ай бұрын
@@jackhibbleriii Another way my old dad was a mechanic showed me. Screw a plastic bottle with the bottom cut out. Into the radiator. Start the engine let it run till warmed . The coolant rises into the bottle allowing bubbles out while keeping coolant in. This method works better that the engines air bleeder.
@jackhibbleriii7 ай бұрын
@@Deezarehairy I’ll try that
@AirPictureGM Жыл бұрын
Might be a useful video if you could keep the camera still for a millisecond. Other than that my brain could not cope.
@wimkramer5330 Жыл бұрын
then at least protect the babies' ears.
@charlesharrold2638 Жыл бұрын
*Promo SM* 👉
@adriaanbertdeveldeharsenhorst Жыл бұрын
Off grid for ever 🤗💖❤🎉
@adriaanbertdeveldeharsenhorst Жыл бұрын
Freedom is just another word for nothing left to loose.😂
@industriesmarketing5611 Жыл бұрын
Can I ship you mine to fix
@jackhibbleriii Жыл бұрын
I can give I a shot. There are no guarantees though.
@na1067 Жыл бұрын
Amazing Video, Does anyone sell any mounting box like Cable guard or Mounting plates for this yet ?
@jackhibbleriii Жыл бұрын
I am not sure. I 3D print boxes when I need them nut my OCTA is mounted indoors and protection isn’t needed.
@SpiffyLabs Жыл бұрын
Thx for the video :)
@jackhibbleriii Жыл бұрын
Thank you
@ajstruhar2048 Жыл бұрын
If you call that pore cable management a flex so be it lmao
@QuynhAnDienMatTroiNhaTrang Жыл бұрын
so IMU calibration failed cause from the GPS module ? have you success repair it by changing the GPS module ?
@AdamBogan Жыл бұрын
thats pretty sweet
@jackhibbleriii Жыл бұрын
The DJI Brand has a lot of great features.
@jmacit Жыл бұрын
Oh MY! 😮. Cleanup on isle 11. Lol😅
@Redacted445 Жыл бұрын
Exactly
@kathyouthere Жыл бұрын
I remember when my sons would have blowouts!!!
@jackhibbleriii Жыл бұрын
It was Devastating..
@Jrr345 Жыл бұрын
I can smell this video 🤣
@jackhibbleriii Жыл бұрын
I was really bad!
@The-nice-fairy Жыл бұрын
Me to it was bad bad
@qKakuza Жыл бұрын
Oh hell naw
@tmbecker78 Жыл бұрын
1.) Bro turned around at 4:50 and slipped into an alternate universe. 2.) Sold out....any ideas on re-stocks?
@dandgerousdave4308 Жыл бұрын
can you do a video on how to set up to pc cheers
@dandgerousdave4308 Жыл бұрын
how do you conect to computer i just keep getting default ip and wont connect when i click discover it gives ip 192 .168.4.1 and i add that into xlights but not reconizing it
@mghtymous21 Жыл бұрын
What was your spacing that you used for the holes?
@jackhibbleriii Жыл бұрын
The trim is J Channel from Lowes and I drilled 12mm Holes every 3 inches.
@mghtymous21 Жыл бұрын
@@jackhibbleriii thank you
@jackhibbleriii Жыл бұрын
@@mghtymous21 Your welcome. I just posted a preview of this years show. Check it out
@fin3125 Жыл бұрын
FyI..the WLED makes it orange, not the controller board.
@jackhibbleriii Жыл бұрын
Yes. It is Quindors favorite color. If I misspoke on the video, I apologize
@fin3125 Жыл бұрын
@@jackhibbleriii no need to apologize, I am just trying to help. Quindor made the hardware only. Aircookie wrote the WLED software for the ESP.
@timpeterson2738 Жыл бұрын
Thanks,you got an Octo real quick.
@jackhibbleriii Жыл бұрын
I was watching his livestream when Quin said Dr ZZZ’s store got them in. I jumped!
@samiraslan9735 Жыл бұрын
Plz do xlights integration
@jackhibbleriii Жыл бұрын
I will make one
@richardcdldriver Жыл бұрын
what controller is that?
@jackhibbleriii Жыл бұрын
They are Quindors QUIN LED Dig-Octa. Available at drzzs.com/shop/digocta-bundle/
@richardcdldriver Жыл бұрын
now what
@jackhibbleriii Жыл бұрын
Now WE HOOK EM UP
@richardcdldriver Жыл бұрын
Interesting
@NightshadeKc Жыл бұрын
I want to see more. I have a few of Quindor's boards they work very well. I really don't care for Drzzz , so I am looking for more how to with Quin products. Power injection, Ethernet , Dig2Go. Thanks. Dave from KCMO
@jackhibbleriii Жыл бұрын
Dr ZZZ Sells Quin boards now so you have choices. The majority of my shows run on Quin Boards now, upgraded from breadboards I soldered together myself. I will make that Ethernet Video soon! Thanks for your comments David
@sirdrakey Жыл бұрын
That's awesome
@NightshadeKc Жыл бұрын
I just received mine from Drzzzz. I cant wait fir your setup videos. I would like to see a video on the Ethernet setup you have. And what your show looks like. I just started this year. Trying to go simple this year. I am trying to use Xlights. thanks for the unboxing. I think you are the first it's so new. I'm with you on Quindor being my go to controller. I will check out your other channel.
@jackhibbleriii Жыл бұрын
Not a problem. I have Wi-Fi Setup video and will make an Ethernet one very soon. Thank you
@graphguy Жыл бұрын
How do you like your IHUA 853D 2A USB SMD Hot Air Rework Soldering Iron Station, DC Power Supply 0-15V 0-2A with 5V USB Charging Port and 35 Volt DC Voltage Test Meter? I am needing to upgrade my solder station and I was looking at this unit.
@jackhibbleriii Жыл бұрын
The Hot air part quit working, but I love the rest of it. It is portable enough to take on the roof even to repair Pixel wiring. The How air part is most likely a replacement part.
@eslamabdra5292 жыл бұрын
Unable to Take Off • IMU calibration required. Calibrate IMU (Code: 30050) Calibration Barometer initialization failed. Restart aircraft • (Code: 30047) • GPS signal weak. Positioning accuracy affected. Fly with caution (Code: 30049) Gyroscope initialization failed. Restart aircraft O (Code: 30045) No GPS signal. Unable to hover. Fly with caution • (Code: 30007)
@AirPictureGM Жыл бұрын
I have the same problem and NONE of the videos on youtube have worked so far.
@bd.vizuals589910 ай бұрын
@@AirPictureGM have you found a solution?
@DLBCOsun2 ай бұрын
@@AirPictureGM THE SAME WITH ME. ANY SOLUTION?
@christianmoreno1806Ай бұрын
any solution bro?
@christianmoreno1806Ай бұрын
@@DLBCOsun any solution?
@eslamabdra5292 жыл бұрын
Could you please help me how to solve imu error!!
@jackhibbleriii2 жыл бұрын
I am not a tech so over the internet troubleshooting is very difficult. Have you disassembled your drone? The IMU does get stuck. Try to tap on the bottom of the IMU.
@eprohoda2 жыл бұрын
how useful doen!dear~👍
@jackhibbleriii2 жыл бұрын
Thank you
@kinlenproductions33373 жыл бұрын
Lucky
@polarbearchad58713 жыл бұрын
Lancaster has the best fireworks around. Awesome view. I seen your drone out there.
@prestonharris40623 жыл бұрын
The Lancaster, Ohio fireworks were dope, Thank's For Recording