Is there a way to partially change the links? only the last 2 of the verticle blinds chain needs replacing, do I need to replace the entire length?
@djextrodinare949514 күн бұрын
Man These Blinds are 😎 Cool !
@durrantalan18 күн бұрын
Thank you. My blind isn’t the same but it put me on the right lines.
@xr6lad20 күн бұрын
Useless. Most blinds are already up and bolted in to place . So I have to somehow get a screwdriver to unscrew the blinds , take them down to take off end and do this then reinstall them. Almost designed obsolescence as most people would have the chain break in situ.
@EternalLaserCosmetic22 күн бұрын
A commentary would help
@timit30424 күн бұрын
1. My gaskets appear to be thin, recessed, maybe more felt material than rubber. How thick is the metal of the brackets? Is a credit card a good test for seeing if it will accept a bracket? 2. If I'm unsure if I have 20mm or 22mm, should I go 22mm ? 3. When shut, are these blackout, or will there be light leakage between the slats?
@TIMBERWOLFE9325 күн бұрын
Yeah I broke it in rage 👌 great video though
@roboshaw1Ай бұрын
also no sound?
@LouvoliteBlindsАй бұрын
Apologies @roboshaw1, we've a setup guide for the 1.2Nm motor here if you need - kzbin.info/www/bejne/pZLcaZahbsiMmck
@Urban0CircusАй бұрын
I can't find any video showing how to set the sixteen-channel remote, all videos always pick the easiest two remotes to demo. It would be better to make a video demoing the most complex remote.
@LouvoliteBlindsАй бұрын
Hello @Urban0Circus - we've a more recent setting video here, kzbin.info/www/bejne/pZLcaZahbsiMmck The sixteen-channel remote sets the same as the other remotes in the video, but you'll will find some tricks for the sixteen-channel towards the end, too. Hope this helps!
@scopher9112 ай бұрын
No one tells you what to do when you can't roll the blind back up! Rolls down but won't roll back up :( :( :(
@bigscotty35222 ай бұрын
How deep is the frame?
@CaptTsubasa092 ай бұрын
This video is a lifesaver. Thanks!!! ❤
@Fluptea2 ай бұрын
Please help. My blinds won't respond to the down button. I can use the down button to stop it from going up but it won't bring my blinds down anymore.
@user-sz5wj7db9x2 ай бұрын
Thank you just what I needed. Where can I get that pin that slips in and out. Mine is broken.
@yousufwadee95792 ай бұрын
When trying to set limits , by pressing set button on remote my motor does not jog I cant get the motor in this mode to set limits
@EmiGlover2 ай бұрын
this saved me from breaking our blind - thank you! So helpful!
@user-gz6xh6ij3d2 ай бұрын
They're not all the same, mine wasnt. Got it assembled but the chain still not working. There was a wire inside, unsure where, against the plastic, it went. Jammed when using
@saulyb6372 ай бұрын
please help - my metal chain came out, when i try and take it all out and do as per the video, the chain doesnt turn and seems locked, please advise what i can do, thanks
@c0mbat153 ай бұрын
It says that you slot the bracket in to the gasket seal but are you saying that you need to break the seal? My UVPC windows have sealing on them and there is no gap there. Does that mean that it won't work and if so are there any other options other than fitting proper shutters?
@LouvoliteBlinds2 ай бұрын
Hello @c0mbat15 - although the brackets slot behind the gasket, the brackets don't actually damage the seal and they just sit behind it. Feel free to send an image of your window and gasket to [email protected] and we can get back to you!
@billybobcalvin82713 ай бұрын
My blind only beeps it doesn't jog😢
@andyking56703 ай бұрын
Hi , Do you mean 75mm from back to front recess or left to right?
@LouvoliteBlinds3 ай бұрын
Hi Andy - yes, do 75mm from back to front and 75mm in from the sides and you'll have even drill holes on either side of the recess.
@geraldineayul57643 ай бұрын
Thank you, you made it clear and simple, job done, well pleased😊👍
@TheCoolOwen3 ай бұрын
Remote shades, pain in the ass!
@talkatz76403 ай бұрын
Hi @Louvolite, Thank you for the great video! I have a 16 CH remote shown in the video. Everything works well except it always goes to CC mode after being left alone for 5 + seconds. How to turn off the CC mode so the last selected channel will stay on the remote after I am done with operating the remote?
@CarlaMaria-ce3gr3 ай бұрын
My blind is all messed up and although I’m following the instructions I can’t get to fix it
@LouvoliteBlinds3 ай бұрын
Hello Carla - we've a more up-to-date setting video for this type of motor, follow the link here and see if this helps! kzbin.info/www/bejne/pZLcaZahbsiMmck
@c47force153 ай бұрын
Factory reset does not wipe positions.
@c47force153 ай бұрын
I have set top and bottom limits but it is still possible to move past them if i press the same direction again potentially damaging the blind . Am i not setting limits properly?
@brianbarton9894 ай бұрын
Oh mate you saved me so much time, thank you never knew my blind was made by your company too, not sure as it was 5 years old why I got a lot of blue that looked like grease on my hands?
@atticbrowser96984 ай бұрын
Very helpful thanks
@azomkhan87494 ай бұрын
Sir How to reset blind by the remote?
@LouvoliteBlinds3 ай бұрын
Hi Azom - there's no factory reset via this remote, it's best to do it via the motor. If you can't access the button on the motor, you can delete the limits on the blind by pressing P2, down and then P2 again, the motor will jog to signify the limits have been reset.
@TingtinG.244 ай бұрын
great
@drtomoyah88054 ай бұрын
What about the patio door handles ? do we need to cater for this or will the blind fit snug and touch the handles of the patio door?
@LouvoliteBlinds4 ай бұрын
Hello - if you take a look at our measuring guide for the Perfect Fit Shutters, you'll see how to measure for your handle rebates to ensure any doors/windows are still fully operational, here's a link - kzbin.info/www/bejne/f4OalHSKr9l2bas
@drtomoyah88054 ай бұрын
@@LouvoliteBlinds did see this but my question is around the patio door not window? Will the shutter fit behind the Handle? Or is it same process as window?
@LouvoliteBlinds4 ай бұрын
@@drtomoyah8805 Sorry yes, it's the same process for both door and window - assuming they're not sliding doors. Again, there's options for a handle rebate on patio doors, so it's perfect for conservatories etc. Hope this helps!
@joannosaji-okai22384 ай бұрын
Are they all remote controlled
@LouvoliteBlinds4 ай бұрын
Hi Joann, the Perfect Fit blinds can have both manual or motorised controls.
@jeancharles20634 ай бұрын
I have the motorised version for 6 windows and the string holding the cellular are already broken for two of them. It is just 4 months I have them… the quality is definitely not there.
@laralarz69044 ай бұрын
What kind of tape measure is that
@nastyniff4 ай бұрын
Gatortape, £25 on Amazon.
@newlinkdirect4 ай бұрын
What do you mean "Compressible / Not compressible seals"? Perfect fit
@leroywilkinson1875 ай бұрын
no sound!!!
@annetthallam72765 ай бұрын
Very very helpful
@maxineamon5 ай бұрын
Chain fix for RollerBlind. In case you are here to reattach the chain for a Louvolite Shade System 40 clutch R3025, this is what you do Remove blind - steps to do this: - roll up blind (if you can with a little force, but not essential), push chain end in a direction it will move a little, usually up, push toward other end., it should now be detachable from chain end) Once removed, roll up blind if is not already Pull out mechanism on chain end from the roller tube - the whole chain enclosure mechanism should slide out - use a flathead screwdriver to ease out if necessary. Remove the plastic pin from point at the end, prise out with a small Phillips screwdriver in the hole if can't do manually Replace the chain - if it has a joiner the make sure it is placed close the mechanism on the side where the chain is chain is will drop down. Reverse process to refit. Note: the three lugs on the chain end should be faced upright, ensure blind is facing correct direction.
@joharrison34695 ай бұрын
In case yiu are here to reattach the chain, this is what you do Remove blind - roll up blind (if you can with a little force, but not essential), push chain end in a direction it will move a little, usually up, push toward other end., it should nonkw be detachable from chain end) Roll up blind if not already Pull out mechanism on chain end - the whole chain enclosure mechanism should slide out, use a flathead screwdriver to ease out if necessary. Remove pin f om point end, prise out with a small Phillips screwdriver in hole if can't do manually Replace chain - if it has a joiner the make sure it is placed so where near the mechanism. Reverse process to refit.
@LouvoliteBlinds5 ай бұрын
Hi Jo - we have a tutorial on how to re-attach your chain here - kzbin.info/www/bejne/qaKwnX-jj7WsjtE Hope this helps too!
@sobia411kA5 ай бұрын
Is the bracket are strong?
@LouvoliteBlinds5 ай бұрын
Yes, very strong! For wider shutters, you get additional brackets for extra support.
@MrsUnique4375 ай бұрын
What are the brackets called please
@ajordan1874john5 ай бұрын
excellent video solution to a head scratching problem, thanks
@leeedsonetwo6 ай бұрын
Easy when u show how, thanks.
@deckyjburns6 ай бұрын
How do you ask alexa to open to favourite positions ?
@oliviabradburn81736 ай бұрын
Hi, are the blinds in a cassette or not?
@LouvoliteBlinds6 ай бұрын
Hello Olivia - the Allusion blinds attach to the headrail as seen in the video, however, you can get a cassette which will cover the headrail.
@cerbenkoc6 ай бұрын
I have a totally different made roletta blinder with a little bit different mechanic part, but thanks to the video it was starting forward to do. Thanks!
@LouvoliteBlinds6 ай бұрын
Glad it helped!
@M66lon6 ай бұрын
Where can I get a cost for these blinds
@LouvoliteBlinds6 ай бұрын
Hello @M66lon, you can find a stockist near your location using this link, and get in touch for a quote on the Perfect Fit Vision Blinds - www.louvolite.com/stockists/
@farrellng90576 ай бұрын
Hi @Louvolite, can you share how to remove unused channels on the remote so it does not appear during scrolling left / right? i.e. I only want to see channel 1 to 4 and hide channel 5 & 6 on the remote. Thanks
@LouvoliteBlinds6 ай бұрын
Hello @farrellng9057, we've covered how to channel lock in our most current motorised guide here - kzbin.info/www/bejne/pZLcaZahbsiMmcksi=mqHd5yFwYAyW_bj7&t=283 Hope this helps!
@farrellng90576 ай бұрын
Hi @Louvolite, may I know how to set the remote to remove the channels that I do no need. e.g. I only want to see channel 1 to 4 on my remote when I scroll through instead of 1 to 6. Thanks
@aislinnmellamphy86177 ай бұрын
Hello, how to pair 3 blinds in one room so the upper and lower limit are the same on all 3 with the one remote.
@LouvoliteBlinds6 ай бұрын
Hello Aislinn, we've got an up-to-date motorised guide here which will show you how to pair the three blinds and operate at the same time - kzbin.info/www/bejne/pZLcaZahbsiMmck