What size spanner wrench do these coilovers use?

It's shocking how nobody shows you how this is done. Thank you sir for lighting the way for us diy'ers!

what was the follow up over long term??

I need this video, I have to watch it later because I’m at work.

Dang!! Amazing job! I found this by chance and glad I did. Thanks for the tutorial!!

Thanks. This helped me understand that external crossovers are preset for tweeter and woofer connections.

Wouldnt that cause rust to form over time?

Just finished mine today, took your advice went to home Depot and got 2 of the 2pack sharpie white oil based pens very happy with the results.. thank you for your help..

Can't wait to do this to highlight the "DOUGLAS" on all my tires!

I don’t get do I just live oem tewtter unplugged?

I bought the Sharpie paint pen but I found the tip difficult to work with so I took all 4 tires off and cut open the paint pen and put the paint in a small container and used a very fine tiny little artist paintbrush instead. Another guy in a different video suggested using white flex seal instead of the sharpie oil based paint to prevent cracks. I might use that for touch ups.

I painted the trunk on my is300 and it's peeling! What's the best way to go about this? I can send you photos. Thanks!

I regret watching all this tutorial videos after I've painted mine. I didn't clean my tires at all before painting 😭 even though the tires are all brand new and never been used, I'm pretty sure they still need to be cleaned.

I like this dude! N good tutorial mate

What kind of carbon fiber wrap u use on the 350z roof

I've seen hundreds of wheel painting tutorials on here, this was one of the best. The only part I would suggest is not painting the inside of the conical faces where the lug nuts sit (just like the rear hub he masked off). I usually just throw some old lug nuts in the wheels to prevent painting them but you can always just go over them with acetone, etc.

I usually just leave the wheels mounted on the car and paint them in the rain at night time.

Nice video!!! Wish you the best! I will do in the future a vlog like these painting my X5's rims!

How many pens did it take to do all 4 tires?

Did you clear coat them ty Vernon

I’ve watched this video from beginning to end five-times. I still can’t understand what he’s saying. This guy is a Marklar. “I used the marklar but marklar turned out not to be as good as marklar so marklar looks great while marklar isn’t holding up so well so I’m glad I bought marklar because it turns out to be better than marklar despite the fact that marklar costs more than marklar.” When you refer to everything as “it” repeatedly and without defining the nouns, it’s called the “Pronoun Game”. Everybody loses. WTF is “it”? You keep saying “it it it”. “It” what? As in the Sharpie or the Dupli-color. The world will never know. Being unaware that one’s self is speaking in pronouns and not clearly defining subjects and nouns is a clear sign of low social intelligence. By this I mean autism.

Does the crossover needs power from the battery? Or how it gets the power?

Looks different must try this :))

I HAVE THE SAME RIMS THAT YOU HAVE AND WILL PANT THEM WHITE

Nice video, thanks for sharing! 👍🏼

I ended up not using the crossovers because the tweeters is where yhe power cam from, so in order for 6.5 to work the tweeters needed to be plugged in, and I didn't wanna take apart all the wiring and all the stuff to connect the base where it splits to the Amp and then that to the speakers sadly

Literally didn't think anything to expect from you because everyone else did the power from an amp, but you did from factory thank the lord

Now I understand how to install it thank you

For the rear do you reinstall the spring or delete it after installing the coilovers??

I'm a 75 year-old grandmother with an 89 Pontiac Bonneville that I love especially the 6 cylinder 3800 ltr engine. Listened to you to get some education on saving my car. Unfortunately, dude, you said more F words that I can tolerate (and I really can tolerate some colorful language). Maybe you can learn to express yourself with better words ..."educate" yourself. Better yourself and don't use the Lord's name in vain EVER. Read the Bible No American with Christmas and Easter in the culture forever has an excuse for rejecting Jesus. It's later than you think.

How to fuck up your trunk in 5 minutes...

Grout pen and clearcoat works the best

Explain how you manage to blend that square in now

Very useful thanks. I was going to run the input straight from the woofer to the cross over. Still not sure if can do that or not??

For The Horde!

It's a "Sharpie" by way of a BRAND, but is this an actual PAINT? I'm guessing these pens can be purchased where art supplies/school supplies are found, yes? I've got RAISED white lettering on my tires, & I would want a _SMOOOOOTH_ finish where it would come off as having been ROLLED on, not dabbed on where it's splotchy/bumpy/etc. Will that be the end result?

useful!

Really enjoyed your video. Thanks.

Do you still use the crossover if you're hooking up an amp also?

Good job on the how to’ simple and efficient 👏🏾👏🏾

How do you tell which wires are the input wires are from the factory? Did they come out of the speaker? Did I miss that?

I will add one more step. Get yourself a spray can of adhesion promoter or plastic primer and spray a couple of very light coats on before you start painting. It dries clear, so you don’t have to mask it. It will help the paint stick A LOT!

Paint pens are n/g no need to sand/grind your tires!! Just clean,use flex seal liquid and small brush.. been doing it for years..paint pens fade,crack...

Super helpful!! Was trying to figure out how im gonna bypass the original tweeter wire and this helped

Sick mate

is it safe to use tyre shine on oil based paint lettering?

I have some harmony audio triaxel speakers and I’m trying to install them into an existing JBL speaker system. How would I do that and what parts would I need?

You are the only video after hours of looking on KZbin Google everywhere that shows how to wire the crossover box haha, I knew tweeter and woofer but couldn't workout how to do the amp/in wiring, the factory wire was the answer... how did I not realise haha. Thanks

I used a credit card in place of the squeegee and it worked okay for my truck but that might not be great for every application. Thanks for the sharing your knowledge

I’ll be attempting soon. Thanks for the know how!