I'd like to know the product number of the chimes department or the place of purchase
@MinitoolsChannel2 күн бұрын
Hi, that's our product code SEI-SPEAKER02, and it can be ordered directly from our online e-commerce at the following link store.minitools.com/en/mini-speaker-for-jeep-compass-and-jeep-renegade-instrument-clusters-sei-speaker02.html
@HarshadaGosavi-m8g8 күн бұрын
Can U Pl give me pinouts or deta of the display module???
@MinitoolsChannel2 күн бұрын
Hi, the pinout to switch on the odometer display is shown at 1:19 of the video
@anishp91969 күн бұрын
Price in indian ruppee
@MinitoolsChannel8 күн бұрын
Hi, price and details are available at the following link store.minitools.com/en/lcd-display-for-abarth-citroen-fiat-iveco-lancia-opel-peugeot-ram-vauxhall-instrument-clusters-sepdisp83.html
@MinitoolsChannel9 күн бұрын
Replacement display for Audi A2 8Z instrument panels available at the following link store.minitools.com/en/sepdisp23-lcd-display-audi-volkswagen-ford-galaxy-seat-alhambra-dashboards.html
@tonerapture271710 күн бұрын
Switch on the dashboard?? What are you plugging those red wires into? I don't see any power source.
@MinitoolsChannel8 күн бұрын
Hi, you can use any lab power supply, set at 12 V, plugging the wires in the pins shown.
@tonerapture27178 күн бұрын
@@MinitoolsChannel Can you show a pic of yours?
@MinitoolsChannel2 күн бұрын
You can have a look online, searching for "lab power supply", there are plenty to choose from.
@shark531311 күн бұрын
Can I swap a red only display to this?
@MinitoolsChannel10 күн бұрын
Hi, we provide replacements for repairing the original instrument, we don't do upgrades so we're afraid we can't help you.
@jonyer198015 күн бұрын
Its it worthy to repair or we'd butter purchased a brand new one in Alexpress?
@mfundokhumalo-q3j17 күн бұрын
should be less or more than10
@shabeervv29723 күн бұрын
Is it available in india?
@MinitoolsChannel22 күн бұрын
Hi, yes we ship to India. The display is available for purchase at the following link store.minitools.com/en/lcd-display-for-abarth-citroen-fiat-iveco-lancia-opel-peugeot-ram-vauxhall-instrument-clusters-sepdisp83.html To place an order you only need to create an account
@guillermotapiadominguez862123 күн бұрын
If you change the display those the previous data of the car gets eliminated?
@MinitoolsChannel23 күн бұрын
@@guillermotapiadominguez8621 hi, the display shows the data sent from the cluster, so if you change it, it will show the same data as before.
@guillermotapiadominguez862123 күн бұрын
@@MinitoolsChannel thank you very much!
@isalmankhan128 күн бұрын
WoW Amazing, didn't know you've the expertise on these mechanical type odometer's, Great work👍🏻👍🏻👍🏻
@nstipet28 күн бұрын
Part number??
@MinitoolsChannel28 күн бұрын
Hi, that's our product code SEP-SPEAKER21, and it can be purchased at the following link store.minitools.com/en/mini-speaker-for-mercedes-instrument-clusters-volkswagen-virtual-cockpit-sep-speaker21.html
@nstipet28 күн бұрын
@@MinitoolsChannel Thanks! I have more questions. Shall we speak privately?
@MinitoolsChannel28 күн бұрын
@@nstipet you're welcome! for any question feel to send us an e-mail at [email protected] or contact us through the chat on our website. Thank you.
@MinitoolsChannel28 күн бұрын
Replacement gears for Porsche 911 964 and 911 993 available at the following link store.minitools.com/en/catalogsearch/result/?cat=0&q=Porsche+911+964+teeth
@disuye29 күн бұрын
I'm about to buy this kit - why do the 2x stepper motors need to be removed from the PCB? They don't appear to block anything?
@MinitoolsChannel28 күн бұрын
Hi, as pointed at 2:17 the two stepper motors are blocking the plastic housing of the LCD display, which needs to be released in order to replace the screen.
@jadsongomes1577Ай бұрын
Olá vc sabe aonde posso comprar?
@MinitoolsChannel29 күн бұрын
Hi, you can purchase the screen at the following link store.minitools.com/en/sei-disp126-colour-lcd-display-for-ford-c-max-focus-grand-c-max-kuga-tourneo-and-transit-dashboards.html thank you
@tjolofree1134Ай бұрын
Nice!! Thanks
@c.t.u3718Ай бұрын
Rhe best toturial that i have ever seen about ironing lcd flat cable, thank you very much🌹
@UncleChillGuitarАй бұрын
I bought one of these for my 2002 Harley and it did not fit so buyer beware…. But to be fair in their fitment list, my bike was not listed….
@MinitoolsChannelАй бұрын
Hi, we're sorry for what happened but the product description cleary indicates the list of the only compatible models, and there's not a single model of 2002 listed. Furthermore we indicate that SEPDISP64 is a 7 digit display
@ismailgullu4143Ай бұрын
does it matter if i have standard or reconfigurable display, if i have standard one can i plug and play reconfigurable one?
@MinitoolsChannelАй бұрын
Hi! If you need to replace the display you would need to get the same version, a different version would not work.
@julesviolinАй бұрын
Hang on you missed a bit.⚠️ How did you remove the ribbon without heat ?!! The ribbon I'm working is soldered on !
@MinitoolsChannelАй бұрын
Hi, the one shown in the video is a carbon ribbon cable and it’s not soldered on the pads, so it doesn’t need heat to be removed. Other kinds of flat cable (such as FPCs etc.) are soldered and so they need de-soldering to be removed (you may have a look at this video as a possible reference store.minitools.com/en/video_tutorial/how-to-fix-audi-a3-8l-a4-b5-a6-c5-tt-8l-instrument-clusters-with-sepdisp09/)
@stephanerongier9372Ай бұрын
Bonjour, je vous remercie pour cette vidéo. J'ai remplacé le haut parleur par celui que vous vendait, le son est revenu et les défauts sont partis. Cependant j'ai maintenant un défaut d'appel SOS ainsi que défaut airbag. Est-il possible de les supprimer avec un simple boitier OBD2? Merci
@MinitoolsChannelАй бұрын
Avant de supprimer ces erreurs, qui ne sont pas liées au problème du haut-parleur, nous vous conseillons de d’abord identifier la cause. Nous sommes désolés de ne pas pouvoir vous aider davantage, car nous ne nous occupons pas de l'effacement des erreurs ; cette opération doit être effectuée sur le véhicule à l'aide d'outils de diagnostic appropriés.
@MinitoolsChannelАй бұрын
Messo in primo piano da Minitools @MinitoolsChannel 12 giorni fa Replacement display for BMW 1 Series and 3 Series at the following link store.minitools.com/en/sei-disp168-lcd-display-for-bmw-1-series-bmw-3-series-borg-instrument-clusters.html
@Buzz65Ай бұрын
I'm looking for replacement lens covers for my 2004 S4R
@MinitoolsChannelАй бұрын
Hi, could you please send us an e-mail at [email protected] with your enquiry attaching pictures of the lens covers and explaining the issue in detail? Thank you
@Tim_C1111Ай бұрын
Great video; could this also apply to the Volkswagen Phaeton? I have a 2004 model with this same problem
@MinitoolsChannelАй бұрын
Hi, absolutely yes, it is the same problem so it works on Volkswagen Phaeton too. Thank you
@lukgdyniatАй бұрын
you forgot to mention that after that proceoyoubwill need to entry pin code of that radio. the pin code is in the service book of the car on a special card. when you enter the 4 digit pin code you will need to press and hold nr 6 button for a while to save it. I have done it and it all works fine. greetings
@lukgdyniatАй бұрын
I have a couple of questions regarding removing and reinstalling a car radio in my NIssan Juke 2011. 1) Should the car battery be disconnected first before removing the radio? 2) When I reconnect the radio, will I need to enter a radio code? I have heard this is often required, and I'm concerned because I don't have the code. The radio is similar to the one shown in this video. Could you please advise? Thank you!
@MinitoolsChannelАй бұрын
Hi, there's no need to disconnect the battery as long as the car is off. When reconnecting you may need enter the code as the radio has been completely disconnected.
@lukgdyniatАй бұрын
@@MinitoolsChannel ok thank You
@MinitoolsChannelАй бұрын
Replacement display for Audi A6 4K and A7 4K available for purchase at the following link store.minitools.com/en/display-for-audi-a6-c8-a7-4k-volkswagen-touareg-3-dashboards-sei-disp226.html
@realjiver2Ай бұрын
Thank you.
@adriansuditu1105Ай бұрын
De unde cumpărăm displaiul ?
@MinitoolsChannelАй бұрын
Hi, the display is available for purchase at the following link store.minitools.com/en/sepdisp44-lcd-display-for-nissan-and-suzuki-car-radio.html
@misteriitaliani2 ай бұрын
hello dear pinout 1-4-5 are the same for w204?
@MinitoolsChannel2 ай бұрын
Hi, to power up Mercedes W204 clusters it's necessary our CAN-BUS generator SEP-RE-CAN002I, available at the following link store.minitools.com/en/can-bus-signal-generator-for-mercedes-instrument-clusters-sep-re-can002i.html
@Go-cp5rh2 ай бұрын
I wonder why the battery indicator is not lit?
@MinitoolsChannel2 ай бұрын
Hi, that's because the cluster is not in the car, and the pins we connected to power it up on the test bench do not send signals to the battery indicator to light up.
@MinitoolsChannel2 ай бұрын
Replacement display for Volvo 740, 760, 940, 960, S90 and V9 instrument clusters outside temperature gauge available at the following link store.minitools.com/en/ambient-temperature-display-for-volvo-740-760-940-960-s90-v90-instrument-clusters-sepdisp94.html
@agarso2 ай бұрын
I can assure everybody here that the LCD sold by MiniTools does the job. Took me a couple of months to work up the energy to take on a task like this but I can attest to the fact that this works on a 1998 Sportster. I didn't remove ALL the wires like this, just loosened them up so that I could remove the clear plate under the faceplate. It was a bit of a hassle, had to remove the bolts and lift the tank, cut all the zip ties holding the wiring harness in place so that I could disconnect the power block for the speedometer and pull it through enough so I could work on the speedo on a table I had set up near the bike. Hardest part was getting the bezel off. Annoying that they don't show it here but there are plenty of videos online that show how to do it. My speedometer stopped working at 3,000 miles and now I know it has 5,175... who knew! It's still crazy low for a bike that is over 25 years old but now I know and now I can finally get it legally inspected. I love the fact that the packaging for the LCD screen was 265 times larger than the screen itself and that the invoice shows that it comes from China... it was probably overpriced about 265 times as well, but now I can inspect my bike and read the screen!
@MinitoolsChannel2 ай бұрын
Hi! We're glad we helped you!
@sadek030-992 ай бұрын
Sehr hilfreiches Video ich habe den Motor gewechselt aber das Problem ist bei mehr ist jetzt der Nadel bleibt bei 60 km stehen wo könnte der Fehler ihre Meinung nach liegen
@MinitoolsChannel2 ай бұрын
Hallo, danke für Ihre Nachricht. Könnten Sie bitte eine Email an [email protected] schicken, unser technischer Kundendienst wird sich dann so schnell wie möglich bei Ihnen melden. Vielen Dank.
@adriansuditu11052 ай бұрын
De unde cumpărăm ?
@MinitoolsChannel2 ай бұрын
@@adriansuditu1105 hi, you can purchase the display on our website, at the following link store.minitools.com/en/sepdisp44-lcd-display-for-nissan-and-suzuki-car-radio.html
@leonoracepeda87822 ай бұрын
Can this display screen be used on a 2017 nissan sentra
@MinitoolsChannel2 ай бұрын
@@leonoracepeda8782 hi, yes it can be used on a 2017 Sentra, but only on Daewoo and Humax car radios.
@giuseppedemasi8812 ай бұрын
Ma se io sostituisco questo speaker, poi devo resettare l’allarme? Ed in caso posso farlo resettare da qualsiasi meccanico che fa diagnostica?
@MinitoolsChannel2 ай бұрын
@@giuseppedemasi881 Salve, sostituendo lo speaker il messaggio d'errore sparirà automaticamente dal display e l'auto tornerà a svolgere le varie funzioni correttamente. In diagnosi l'errore potrebbe apparire anche dopo la sostituzione dello speaker, dipende da caso a caso.
@MinitoolsChannel2 ай бұрын
Replacement speaker for Fiat Punto Evo and Punto 2012 (199) instrument panels available at store.minitools.com/en/sei-speaker07-mini-speaker-for-abarth-citroen-fiat-lancia-peugeot-dashboards.html
@billyg1812 ай бұрын
Hello. How do you know that tje speaker is fault ?
@MinitoolsChannel2 ай бұрын
@@billyg181 hi, we've analyzed the faults and find out that the speaker is the cause.
@billyg1812 ай бұрын
@@MinitoolsChannel ok. I ordered a new speaker. Hope this will solve the issue.
@unosec2 ай бұрын
very good video👍👍👍💯😊
@osmaresaulunafernandez93273 ай бұрын
Do you know what the replacement for this part is for jetta mk6?
@MinitoolsChannel3 ай бұрын
Hi could you please send your request at [email protected]? Thank you
@jpfister1fav3 ай бұрын
Simply brilliant! It took me four tries, but the closer I studied the outstanding, detailed video, the more confident I became! Then, IT WORKED because I had not properly placed the two conductive pads properly on the sides! This was a miracle that, from what others have said, would have cost me a $1,000 at the dealer or my specialty shop. I did it for $50 and about three hours of easy work over two days (I ran out of enthusiasm on the first day). Thank you SO much!
@MinitoolsChannel3 ай бұрын
Thank you for the feedback! We're glad we helped you!
@MinitoolsChannel3 ай бұрын
Replacement gears for Porsche 911 G Carrera 3.2 at the following link store.minitools.com/en/video_tutorial/porsche-911-carrera-3-2-km-odometer-repair-with-minitools-replacement-gear/
@amaurydelagartha42183 ай бұрын
Hi, in fact, you just change the lcd display, and not repare it. Could you think if possible to open the display to restore a good screen ?
@MinitoolsChannel3 ай бұрын
Hi, in our experience when displays show such issues, the best solution is to replace them.
@amaurydelagartha42183 ай бұрын
@@MinitoolsChannel that was finally I did xD... I don't have the knowledges for start this "operation". Above all, thanks a lot for your video which helps a lot.
@giajacobs31283 ай бұрын
My screen is new but it’s flickering, the backlight is stable but the display is flickering, do you know how to fix?
@MinitoolsChannel3 ай бұрын
Hi, in order to try to help you could you please send us an e-mail with more details and attaching pictures of the issue at [email protected]? Thank you
@rnldmanuel883 ай бұрын
Does the cluster need to be reprogrammed after installing it back
@MinitoolsChannel3 ай бұрын
Hi, no the cluster does not need reprogramming after replacing the LCD and installing it back.
@MinitoolsChannel3 ай бұрын
Replacement speaker available at the following link store.minitools.com/en/mini-speaker-8-ohm-for-audi-volkswagen-bosch-instrument-panels-sei-speaker10.html
@lahcenbana40223 ай бұрын
prx
@tegthepeanut3 ай бұрын
does it matter where the needle points when putting it back in
@MinitoolsChannel3 ай бұрын
That depends, some instrument clusters will bring automatically the needle back in the correct position, but we recommend to always bring them back to the original position manually.