Thanks for your informative video. Have persuaded me to purchase a set of tyre warmers
@19099090Ай бұрын
Very informative vid, thanks! I just wish the mic was better
@msanchez3892 ай бұрын
Hi, I have a R1 2005 with power commander 3 . Can I install this quick shifter to my bike?
@mfactory4512 ай бұрын
Top top, i have it on my suzuki also? Have you done any chages after this video?
@ajijoe57292 ай бұрын
Hi sir..im from malaysia..can i ask u for help on my irc qs..qs not function when put the gear up but it function when drop the gear..what the problem..pls help
@christiannubz42134 ай бұрын
Only question I had is you went over all of the plugs but not that single little wire that looks like ot goes to a ground or to the battery. That's my only problem I can't figure out
@gabyvandijk6084 ай бұрын
Hello mate, i have a problem with my irc blipper 2016 rsv4rf
@GaryDobson-bw4xq4 ай бұрын
Can someone tell about the green wire on the module harness where to connect it
@khaledshukri19154 ай бұрын
I have Gsx-r 1100 1991. Can i install quick shifter??
@JCunningham214 ай бұрын
no those stock rotors are floating. they are both the same tech. just the factory are riveted not E clips
@Bar0c7 ай бұрын
have you ever done one on a dorsoduro 750?
@alexandrurobertpaun748511 ай бұрын
Hi. Very useful video, I didn't purchase the quickshifter yet, for my R6 2008, but I'll buy it soon. Hopefully will be what I need.
@brianhaygood183 Жыл бұрын
I can barely understand any of this. Mic is holding you back and you are mumbling.
@gianjordon511 Жыл бұрын
Hi! On 216 tuono the irc screen on the module does not turn on is that normal? Triple checked that everything is connected im going nuts also when i put the bike in neutral the N light goes out as if its not reading it anymore
@sbkaccessories_aus9 ай бұрын
Pleas get in touch directly with IRC. They normally respond quick and are the best first point of contact.
@jerequan1282 Жыл бұрын
Does the unit have presets for different styles of riding?
@jakublavicky5769 Жыл бұрын
Hello, I’ve just installed the IRC blipper on GSXR1000 k5. But the blipper is blipping on upshifts as well. I checked the CE parameter. Any Ideas?
@wellertsai9270 Жыл бұрын
May I ask whether "r" is the rpm of the instrument corresponding to starting the vehicle is correct? If so, what value should be set for "sr"?
@wellertsai9270 Жыл бұрын
May I ask if sr is lower than how many rpm, does it mean that it is impossible to use the fast rewind?
@johanhulle Жыл бұрын
Im trying to install this on a 15 ktm superduke but instructions are absolut shit. Maby you know why there is three connectors (piggybacks) on the injector harnes, but the bice only has two injectors? Whats the third one for? Sorry to bother you but I cant figure it out and IRC arent replying.
@TrickRacing Жыл бұрын
How did you get the blue inserts for the floating rotor?
@sbkaccessories_aus Жыл бұрын
HI mate, the rotors come with the blue rings when you order them.
@jonnymac8925 Жыл бұрын
After 2 years how do you find them? I recently purchased a 13 inch galfer rotor for the front of my Harley Davidson. I am swaping out the Brembo floating rotors I have on the bike currently. The brembo carriers started to rattle after like 5000 miles because of the vibration and aluminum carrier. I heard some guys with Galfer rotors having the same issues with their Harleys, so I'm curious to hear from the sport bike side of Galfer rotors
@sbkaccessories_aus Жыл бұрын
Hi Jonny, our personal experience is only on the track with the galfer brake rotors. We have done quiet a number of sessions and have found the rotors to work perfect. We have not had any issues with the carriers at all mate.
@sbkaccessories_aus Жыл бұрын
Also, Harleys are a different animal to sports bike and I don't have much experience with the Harleys.
@jenqq8514 Жыл бұрын
does it change my speedometer or no?
@sbkaccessories_aus Жыл бұрын
It does not change the speedometer.
@c.a6824 Жыл бұрын
hi, will this work on a 2012 cbr600rr with a power commander and cat delete tune? i just ordered but didnt see anything
@sbkaccessories_aus Жыл бұрын
Hi mate, No it should not do so.
@R6Stunnaa2 жыл бұрын
Im having issues with mine on my 07 r6 , won’t shift up unless you slightly let off the gas which defeats the purpose ! Anyone have the same issue ? And if u do how u fix it
@sbkaccessories_aus Жыл бұрын
check your battery to make sure it has full charge. Also make sure that you hooked up all the wiring correctly.
@a-chail97202 жыл бұрын
How much weight saving with galespeed compared to OEM wheels?
@sbkaccessories_aus2 жыл бұрын
About 3 Kg I believe. Maybe just a little more than that.
@miguelpolanco63722 жыл бұрын
Video was great wish it fixed my problem
@sbkaccessories_aus Жыл бұрын
Hi Miguel, what problem do you have?
@louismartin44462 жыл бұрын
one minute intro.?…cmon man
@sbkaccessories_aus Жыл бұрын
LOL
@jonesjones212 жыл бұрын
Hey i have insall the irc qucikshifter and auto blipper on my ktm superduke1290r 2016 and i use the upkit for fuel cut but every timer i turn the bike on i have to go into the menu to set "OC" to C to start the bike, is that right...??
@sbkaccessories_aus Жыл бұрын
Hi Jonas, I dont think you should have to do so. It seems as if the settings get reset. Check that your battery is battery has full charge.
@Phil58Liew2 жыл бұрын
Hi, thanks for the resourceful video. i have just fitted and IRC to my Panigale 1199s (2013) Straight out of the box it worked very well with very smooth up/down shifts, no pulling or pushing but for some strange reason the bike jerks at 8500 rpm when winding on the throttle or when held constant. I see you made adjustments to "rr" and would I need to do same here. The standard L and Ls were both 16 as delivered but I have increased the L to 18 and Ls 17 that appeared to help a little. Also with the Panigale I can only access the menu if the engine runs otherwise I cannot. Have I missed something? Thanks.
@sbkaccessories_aus Жыл бұрын
HI Phil, have not seen this issue before, have you contacted IRC?
@Phil58Liew Жыл бұрын
@@sbkaccessories_aus hi, thanks for coming back. I was in contact with the distributor from where I got mine in Singapore. I am based in KL. Following many adjustments to no avail I got the bike back to a Ducati tech. He replaced a worn wire harness (the bike's 9 years old) to the twin injectors and the problem is just about gone, Still need a little bit of fine tuning but I am most happy with it.
@markbradley75052 жыл бұрын
Hi ,, my shifter is blipping after I've changed gear not during, so then you get a rev when your not expecting it,, what do I need to change,,thanks
@sbkaccessories_aus2 жыл бұрын
Hi Mark, from a previous case, it sounds like a sensitivity related issue. check the sensitivity level and maybe adjust it so it is not too sensitive.
@markbradley75052 жыл бұрын
That's down the gears ,,,which code do I need to look at,,thanks
@wellertsai92702 жыл бұрын
May I ask that the final setting of C/E means that the current is reverse
@annefrank9442 жыл бұрын
E
@wellertsai92702 жыл бұрын
2016RSV4 setting mode is currently high speed out of gear, there will be a sudden impulse
@oliver-kiss2 жыл бұрын
The link for the online manual doesn't exist. Does IRC not maintain their website anymore? They're literally the shittiest company on the planet.
@sbkaccessories_aus2 жыл бұрын
Hi Oliver, a manual did not come with your device? If not, just email IRC via their contact page. They usually respond with the correct manual. If you have no luck DM us your email and will will help you out.
@OM-kw4py2 жыл бұрын
Worst company ever. Cheap crappy product, never on time, make excuses, send angry insulting emails (I have proof of all). I lost two track days and out of pocket $500 thanks to them. They didn't bother to make it right and just kept sending me angry insulting emails blaming me for their lateness in sending my track fairings. I also lost money on the refund due to the foreign exchange rate. DO NOT BUY for your own good. Or go through hell like me with them and learn.
@manrayr16802 жыл бұрын
not an installation video bro this is an item description video basically i need to know how to put this on to my bike
@paddyryan2 жыл бұрын
Hi mate Is it possible to email me the manual for set up as I bought a bike with auto blip and quickshifter installed. I’ve watched your video but some settings are not on mine. I can shift up and down seamlessly on the paddock stand but when I put load on the bike (ie on the road) it won’t shift or it needs a very heavy shift/force. Any tips? Thanks
@oliver-kiss2 жыл бұрын
Were you able to get your hands on the manual?
@paddyryan2 жыл бұрын
@@oliver-kiss ye all sorted thanks
@starq_starq2 жыл бұрын
Hi Bro, does it fit to Yamaha R6 2005 ?
@sbkaccessories_aus Жыл бұрын
You would have to get the universal blipper kit for Yamaha.
@micsub2 жыл бұрын
Great video, very helpful, thanks for the trouble you go down to editing & uploading this content. Subscribed ! I have a kitcar with a 2010 Hayabusa engine and it's OEM gearbox. IRC blipper is installed and working, but could be perfectible (gears hook a little when upshifting and it seems the blip is not high enough RPM to match apparently). Do you know where I can find the pdf for set-up / tuning please ?
@sbkaccessories_aus2 жыл бұрын
Hi Mic, you need to email IRC for the PDF.
@micsub2 жыл бұрын
@@sbkaccessories_aus Hi Bud, thanks for your answer. Got it.
@husq462 жыл бұрын
hey bro I have a question but on my 09 gsxr750 between 3-4 the bike revs then kids into 4th gear what do you think I should do... and I do have the ice quick shifter.... I think its to sensitive.
@sbkaccessories_aus2 жыл бұрын
Hi bud, this happens only between 3-4 gear? Does it shift normally when you turn off the QS?
@husq462 жыл бұрын
@@sbkaccessories_aus yea it does.
@joesefwidagdo69172 жыл бұрын
For one kaliper 250 prever rcs17cc/galespeed elaborate?
@sbkaccessories_aus2 жыл бұрын
Hi Joseph, I believe you can go even with a 14 or 16 Gale Speed VRC.
@VMVarga-yf6eg2 жыл бұрын
Hi mate, great video thank you. I bought an RSV4 with the irc quick shifter so was wondering if you had a link to the online or pdf user manual. My first time out at Broadford it wasn’t working (no cut so assume it might be the pressure or revs setting) so just trying to do some research before getting my hands dirty
@sbkaccessories_aus2 жыл бұрын
Hi mate, I only have the Universal blipper shifter manual here. I will ask IRC to email me a PDF. Can you please contact us through our Facebook page facebook.com/superbikeaccessories . I will share the manual with you there.
@VMVarga-yf6eg2 жыл бұрын
@@sbkaccessories_aus Thanks mate, will message you now
@moparman73672 жыл бұрын
subbed
@jonesjones212 жыл бұрын
Hey i have insall the irc qucikshifter and auto blipper on my ktm superduke1290r 2016 and I use the upkit for fuel cut but every time i turn the bike on i have to go into the menu to set "OC" to C befor i can start the bike. Is that right..?
@moparman73672 жыл бұрын
Thanks mate. :)
@kevinbongailas55082 жыл бұрын
Hi great video i have a problem with aprilia rsv4 downshifting works amazing but upshifting nothing is working as per the parameters everything as per manual
@_bozza_2 жыл бұрын
Hi Kevin, do you get an Er code on the IRC unit when you engage the ignition? Also, check to make sure that the battery has enough voltage. With the RSV4, if it is under the recomended battery voltage, it affects the autoblipper.
@kamalaghofur53782 жыл бұрын
Price master rem galespeed vrc 16
@sbkaccessories_aus2 жыл бұрын
Hello Australian price is $540
@emmanuelgonzalez-jk7mk2 жыл бұрын
Question I saw some settings you didn't talk about in your video. Like dS dR I saw it at 23:34 time mark. What are those for? Thanks
@sbkaccessories_aus2 жыл бұрын
Hi Emmanuel, I have to check again but I think they are for sensitivity.
@emmanuelgonzalez-jk7mk2 жыл бұрын
Thanks for this video, I was hesitant about buying this for my 2012 s1000rr. This video answered a lot of questions and now feel confident in this product. Thank you so much
@kazadventures2 жыл бұрын
Heaps of audio static. But great vid
@kamalaghofur53782 жыл бұрын
Price galesped vrc 17
@markpm40012 жыл бұрын
SBK accessories i have a questions..i have a 2013 Yamaha r1. 1- do i need to flash my ECU in order to qs works?.. Or works without connecting the green wire to ECU
@sbkaccessories_aus2 жыл бұрын
No need to flash the ECU. The IRC QS is independent of OEM electronics.
@markpm40012 жыл бұрын
Thank you for the quick respond, so qs works without connecting the green wire to ecu??..
@sbkaccessories_aus2 жыл бұрын
You can try it without connecting. What does the manual say what is the green wire for?
@markpm40012 жыл бұрын
@@sbkaccessories_ausblack wire to ground and connect green wire to ecu dosen't say anything else.