I had exactly this issue on bumpy rides. My bike shop changed the chainring, but seems ridiculous to have to pay for this if it is an obvious issue with a new expensive bike

I did my fix a bit in the different way: kzbin.info/www/bejne/g6vddqh9aKp5jtU

Omg, thank you so much for posting this issue, i tried everything i could think of and had no luck this idea of yours saved me time and money, thank you so much.

I did my fix in the different way, though kzbin.info/www/bejne/g6vddqh9aKp5jtU

Man!!!! Totally fixed the problem for my 2016 and the door even stays flush with the body now! Thanks for this! I’m still going to take mine to dealership and ask for a proper fix

Just did this on my 2014 sienna. Not perfect but practically free on only took a few minutes.

How do you remove the bolt/add the bolt that’s hidden behind the crank arm?

I'm having the same chain drop problem, especially when I'm close to the large gear in the rear. Can you let us know which torque wrench you're using (brand and model)?

The sensor that tells the van that the gas door is open is waaaayyyy to stiff. This is why over time it brakes it.

I painted my black door to match my Sienna. I tried taking the door to a Toyota dealer to have them install it and they said no…😡. Because i didn’t buy it from them and i painted it they wouldn’t install the door.🙄. I’ll have to find that rivet gun and rivets

What is the part number of the little clip? Do you have a link to where I can buy it?

Great simple fix - works well enough, saves lot of money and/or work. Now carrying a spare zip tie in the van just in case lol

I had the same issue on my 2015. The zip tie seems to have fixed the problem. At least as you said, I can live with it! Thank you!

best thing i did for sure...

Thanks! Just did this to our 2013. Nice cheap fix for a car we are slowly riding into the sunset.

highly recommended, its smoother and has never dropped. WHY the praxis is designed that way is just wrong.

The blue stuff on the Bolts is loctite. It prevents the bolts from loosening up with vibration. You don’t want your chainring falling off while riding. I also use loctite on my bolts for my shoe cleats and other bolts that I don’t want to loosening up over time like my handle bar bolts. What torque setting did you use?

Installed two zip ties. Now the fuel door pops open like a jack in the box. I still have the problem with mechanical side door lock out actuator. It requires too much force to overcome the lockout which over time destroys the fuel door hinge.

Wolf tooth chain ring going well. I didn’t wait for a chain drop to change it. There are enough discussions in the facebook creo group that hint it may drop eventually. I wanted to avoid it. I didn’t need to use spacers and I didn’t need to modify the chain itself- reused the same length.

@ucberk599 Looks good! After a few weeks how is your wolf tooth chain ring going? Does the chain align well when in the lower gears (worse/better) also have you had any dropped chain incidents?

I paid way to much about 4 years ago when I let Toyota replace the gas cover. This saved me a couple hundred dollars from doing it again 😊

muchas gracias!!!! me ahorraste mucho dinero, works great!!!

You saved me a TON of time n $$... awesome fix

Apparently Toyota was doing a free repair on "x" model siennas. Including mine. But it was timed. Mine broke after their repair period. This should be a safety recall since it causes an entire door to not function properly on the automatic doors.

Thanks for showing us this. The local police department sent their tech to copy video from my NVR and they couldn't figure this out.

It’s common on ALL TOYOTAS. Not just the Siennas.

hey at least in the short term, this worked for me!

Same problem with my 2014 Sienna, will try zip-tie. Thanks!

I'm use stainless steel wire instead of zip-tie. I hope it's ok.

Any update or video on jow you install the new door?

I have the same problem my 2011 Sienna, I am going to try your idea a try.

😜 P R O M O S M

What? That NVR does not have a local Network web page where you can do that?

Thanks helped me out big time ,tried to copy a video of a employee breaking there leg for 3 days

worked!!

Thank you so much, man. I was struggling with this.

Thanks very helpful

*torn between amcrest and these. chose these and>>>**t.co/Rzn5QYta6b ** I love them they do absolutely everything i wanted. interface is easy to use free backup. and the motion alerts me almost instantly on my phone. don't leave many reviews but this product deserved one!*

thanks

I had such a hard time figuring this out. Thanks so much. You saved me a call to customer support.

what a difference in quality of life! I wouldnt have known about this splint if I hadnt seen your video. I ordered it online, then went back to the orthopaedist to make sure it would be ok. She said, Oh sure. Those are great! We just don't have any. !!!!???? Well, I have it now, and the past 2 months have been much more comfortable than they would have been if I had stayed with the giant splint they originally gave me. I have another week to go.

I found it very useful! Thanks a bunch..

I had this happen to me a few weeks ago but instead of the tendon snapping the tendon fractured the joint in my finger and then I had to get surgery to have 2 pins that go through my skin and into the bone. The first 8-10 days I had a splint that completely made it so I could not see or move any of my fingers or my wrist. I got that off yesterday and now I have a kind of shield splint that protects the pins from hitting things. I also have to clean them twice a day for another 4 weeks then they get taken out and then another 4 weeks for the holes in my finger to heal. So the whole healing process takes roughly 8-10 weeks

Thank you!! This helped my hubby so much!

Same incident I fell of my bike I was just wondering if they have any sizes for the pinkie

Thank you for giving me 100 times more info than the doctor....

I didn't splint mine, doctors didn't tell me to, that's a big mistake. Swelling goes down but it's stuck on mallet mode for good.

thanks.. avoided surgery and put split for 10 weeks. Worked for me..instagram.com/p/BRia9EoF2Cv/

Thanks for the informative video! Is the size for the stax splint the same as for the oval 8? For example, if I have a size 2 stax splint would it coincide witht he size 2 oval 8?