Are you able to fine tune measurements in the app before they export? Say it's off by an 1/8" and can you just type it in to tweak it?
@hillcrestcabinets4 күн бұрын
@tannersherwood3232 update coming to include this feature
@tannersherwood32324 күн бұрын
@@hillcrestcabinets Sounds good - Cabinet Vision is planned as well as being supported?
@hillcrestcabinets4 күн бұрын
Yes coming Soon next few weeks or so
@tannersherwood32324 күн бұрын
@@hillcrestcabinets Super!
@hanifikilic31977 сағат бұрын
I tried the app on the latest iPad Pro. It gets the overall shape right but dimensions are off quite a bit. When I go really really slow it got better +-10mm but not 99%. Also since I subscribed I thought I would be able to use on my iPhone as well like all other apps but no it wants me on o pay for it again. Only thing that worked was importing to Mozaik the overall shape. Get yourself an ipad with ultra wide camera and get Goodnotes to take a picture and write your dimensions right on it. One more thing about this app it requires decent lighting otherwise it can miss more details, sometimes you don’t have that option on sites.
@AGILISFPV5 күн бұрын
Very cool. Is this using polycam or Kiri scanning?
@hillcrestcabinets5 күн бұрын
@AGILISFPV similar technology but it is a standalone app does not rely on anything else or even an internet connection to run
@macediv11 күн бұрын
I'm new to this furniture world and I love your videos. Thank you for your time and effort
@npd7219 күн бұрын
I would love to see it working in a small walk-in closet or a reach-in closet. You would have to move clothes away from the walls.
@npd7219 күн бұрын
How does it know the scale ? That's awesome. I do closets I would love to try this out.
@hillcrestcabinets19 күн бұрын
You select in settings either mm or inches
@CopperCanyonAZ20 күн бұрын
We have used Polycam before with so so results, it would have a hard time capturing a large kitchen. Looking forward to seeing this in its final form.
@fredmayn61320 күн бұрын
Awesome
@quibugperkins20 күн бұрын
Thanks
@snydrnck20 күн бұрын
I am so excited. I have been dreaming of something like this. I just need to upgrade to a pro and you have my business.
@hillcrestcabinets20 күн бұрын
Thanks! Appreciate it!
@cobrafoaminsertsandcases606020 күн бұрын
when cutting the U shape drawer box, it requires to flip som eparts. WHy is that?
@hillcrestcabinets20 күн бұрын
Likely a dado located on both faces of the part
@cobrafoaminsertsandcases606020 күн бұрын
@@hillcrestcabinets a dado on one side and the dovetail on the otherside.
@howardyueh21 күн бұрын
How about the software to angled wall?
@hillcrestcabinets21 күн бұрын
Yes does angled walls perfect
@johnprzybyla421522 күн бұрын
Why couldn't you use angle hinges. We use those in our shop for the 45 degree cabinets all the time.
@johnprzybyla421522 күн бұрын
Never mind, I didn't see the first part
@hillcrestcabinets22 күн бұрын
This would be when you have odd angles not 45
@johnprzybyla421522 күн бұрын
@hillcrestcabinets my apologies I missed the beginning of the video. Very cool, haven't run into this yet but when we need a custom angle we know who to turn to. Any more cool content like this?
@fahadalharbi52623 күн бұрын
Thank you for the wonderful effort We do not speak English and depend on subtitles. Please activate the subtitles for this vedio
@fahadalharbi52623 күн бұрын
Thank you for the wonderful effort We do not speak English and rely on subtitles. Please activate the subtitles for this vedio
@fahadalharbi52626 күн бұрын
Thank you for your great effort and the useful information you provide. How can I make a bedside drawer tops
@hillcrestcabinets26 күн бұрын
@fahadalharbi526 thanks! in the frameless v12 library I'm pretty sure there is a horizontal panel you can use and align with the cabinet. Alternatively you can use the tops tab and add a countertop and apply the same texture
@fahadalharbi52626 күн бұрын
Thank you for your response. If I use the tops tab, can I use the cutlist tab and create a G code for the counter tops ? Sorry, I'm a beginner
@hillcrestcabinets26 күн бұрын
No worries If you make the material template for counters to match it will export to optimizer
@fahadalharbi52626 күн бұрын
@@hillcrestcabinets 🙏🏼@@hillcrestcabinets
@ivxxy.__28 күн бұрын
Nice vids. Have a second interview to do CAD mozaik at a wood shop tomorrow. They’re gonna be shocked that I know how to do a kitchen without mozaik training yet 😂🙏🏻
@hillcrestcabinets28 күн бұрын
@ivxxy.__ haha that's the best comment I've had yet that's amazing .
@ivxxy.__28 күн бұрын
@@hillcrestcabinets yeah bro im so glad dude. I hope they got a cabinet library already made, if not im sure I’ll have to split faces and interiors like you showed me in your other vid. We’ll see🙏🏻 cheers
@hillcrestcabinets28 күн бұрын
Well good luck on your interview 👍
@ivxxy.__28 күн бұрын
@@hillcrestcabinets thank you sir
@EvolvewebАй бұрын
Not sure why, My V13 version does not allow me to right click option to add a new folder, like you demonstrate at 5:25min. (right click does provide a menu to add anything).
@hillcrestcabinetsАй бұрын
In windows 11 there's a more options button that opens up the standard right click menu
@duckman860Ай бұрын
Nice work.. I use automotive double-sided tape for holding tricky fronts
@hillcrestcabinetsАй бұрын
Oh nice I'll have to try that
@mcfarlandcustomsАй бұрын
Dude your channel is so helpful.
@hillcrestcabinetsАй бұрын
@mcfarlandcustoms Thanks appreciate it!
@mcfarlandcustomsАй бұрын
@@hillcrestcabinets currently having some issues with mozaik custom parameters not applying. Any resources you suggest I check out? Trying to move the rear line bore up so that my shelf’s sit at an angle but the line bore won’t move. I can get the shelf to be angled, but no luck with the holes moving
@hillcrestcabinetsАй бұрын
@@mcfarlandcustoms are you trying to make an angled shoe shelf?
@mcfarlandcustomsАй бұрын
@@hillcrestcabinets no, just trying to move the entire rear line bore up. I need to do it on quite a few cabinets, so I would like to use a custom parameter to do it.
@hillcrestcabinetsАй бұрын
Hmm I'll try an experiment tomorrow to see if I can get that working you might have to remove the holes all together and do it all in custom parameters
@yuremsantos8894Ай бұрын
where do i change the default settings for face frame rails, it has them at 1 9/16 and id like to change them to 1 1/2 as the default.
@hillcrestcabinetsАй бұрын
@yuremsantos8894 go to parameters face category then the rail thicknesses are set there for example top rail is under TR
@michaelbaucom8220Ай бұрын
I tried this. Bought that $600 bit and all. Burnt through 3 sheets of material and 2 days of time. Never got it right. Sold the bit and bought an actual dovetail machine.
@hillcrestcabinetsАй бұрын
As time went on it became evident the quality of the plywood makes all the difference also the material thickness settings, tool heights and z0 needs to be bang on as well. Sorry it did not work out for you man.
@samuel_el_coАй бұрын
When copying an existing title block to edit, what's benefit of export>import vs. the duplicate feature?
@hillcrestcabinetsАй бұрын
At the time of this video I don't think duplicate existed or maybe I just missed that but essentially the same thing
@ky6088Ай бұрын
Thanks for the video. it's so helpful. by the way I tried to add an end panel to a just normal cabinet from shape tab but it only changes side panel, it does not add another end panel onto the side panel I change its type as finished end. not sure when setting I missed.. please help me out.
@hillcrestcabinetsАй бұрын
Make it a left or right end and not a finished end depending on what side
@opcptyltd5092 ай бұрын
Can you draw/nest letters on Mosaik? I have the software and was thinking if I could get some letters routed with CNC from a sheet of plywood.
@hillcrestcabinets2 ай бұрын
Oh how sweet that would be. Truth be told it is possible if you want to manually draw all the points and radiuses in the shape editor. But you cannot import a font and send that shape out to cnc.
@ginadugger61212 ай бұрын
Thank you for these videos. I have been getting an error in the product log in the editor. It says "Operation depth is greater than part thickness for part UBack". Any idea on how to fix this?
@hillcrestcabinetsАй бұрын
First I'd try clicking rebuild all parts this will remove custom modifications so try it on a test cabinet in a job. Then go through your dados section of your parameters to confirm the depths are not too deep
@Woodbug48882 ай бұрын
I have a question. Can I have 2 Mozaik programs on the same drive. One for each machine I have. I would like to keep them totally separate to avoid confusion.
@hillcrestcabinets2 ай бұрын
Yes ask mozaik for additional seats
@comedefleurieu3152 ай бұрын
Hi, Can the metric system be used instead of the inches unit ?
@abhishek72712 ай бұрын
hello if I update the version, will this setting remain the same ?
@hillcrestcabinets2 ай бұрын
No setting should remain the same. Couldn't hurt to take a screenshot of the settings before an update or do a mozaik backup for safety sake though.
@r3woodpurposecustomwoodwor142 ай бұрын
i just tried and everything went good in the one drive cloud but when i was able to open it gave me a different id code so and i does not let me use the same code
@hillcrestcabinets2 ай бұрын
You should still open mozaik from the same c drive location then point it to the cloud folders
@soroushdelavari40612 ай бұрын
Hey bro love your videos. This question is unrelated But is there anyway to tie boxes together to match their grain I know inside one box you can do that but what about seperate products?
@hillcrestcabinets2 ай бұрын
You can Grain match 1 box at a time like you said then you have to manually organize the groups in the optimizer to match multiple banks together
@andrelnsoares2 ай бұрын
Do I need a pro version of Mozaik to see the 3 different tabs? I dont see it in mine.
@hillcrestcabinets2 ай бұрын
Update to version 12 should be in there. Check out the forums for the download
@howardyueh2 ай бұрын
Is there a easy way to clean the tight corner after you change the shape? For example I would like to use a 1/8 bit to clean the 90 degree corner cabinet for top, and bottom. Thank you
@hillcrestcabinets2 ай бұрын
I wouldn't exactly say easy but you could add a manual toolpath to any inside corners that would call the 1/8 bit
@mikejd13642 ай бұрын
Slides at the top is a good idea. Probably sits more square than having them at the bottom.
@hillcrestcabinets2 ай бұрын
Yes 100% and I think looks a bit cleaner than undermounts which I was also toying with
@jaystoltzfus-eh8gp3 ай бұрын
Hi, do you have a video , showing how to connect Mozaik and link together with different computers
@hillcrestcabinets2 ай бұрын
Video incoming soon
@TapioBlue3 ай бұрын
Changed my life.
@mitchellunderwood-wy3gz3 ай бұрын
Love it..!!! Good ass video..!!!
@hillcrestcabinets3 ай бұрын
Thanks!
@DustinPhillips-mb8zu3 ай бұрын
Nice
@snydrnck3 ай бұрын
Keep up the great content.
@thelinkofalllinks3 ай бұрын
Haha! That was good.
@leghtim13 ай бұрын
Keep up the great work! 🎉🎉
@hillcrestcabinets3 ай бұрын
Thanks appreciate it
@jasonreplogle6163 ай бұрын
Way too fast.
@hillcrestcabinets3 ай бұрын
Try this one I redid this one much slower in this deep dive kzbin.info/www/bejne/jIGlf62NiKp4qcU
@RuffKutmedia3 ай бұрын
Well done, thanks
@KnottyDogWoodshop3 ай бұрын
How did you make the dust bin lift??
@hillcrestcabinets3 ай бұрын
I guess I should make a video on that eh. 🤔 12v winch powered by a milwaukee battery
@leghtim13 ай бұрын
Yes!! Love it. Every video i learn something new
@hillcrestcabinets3 ай бұрын
Awesome! Thank you!
@declan83913 ай бұрын
🤷 'PromoSM'
@Reaction393 ай бұрын
my cutlist has no optimize button
@hillcrestcabinets3 ай бұрын
The CNC part is a paid upgrade in mozaik, is it possible you have the design only portion? Might be worth calling