Great video I just did this but you actually don't have to remove the ground. One less thing to unplug and plug in since it's fairly cramped in there. Just pop off the two metal hooks and swap out the bulb. Took like 5mins.

Hi Kamal, great video and channel, thank you. My question is, can you replace this bulb with the front bumper and wheel still in place?

That left side gray connector has always given me a tough time. Mine is now missing the bottom cover and the springs, but still locks the sensor. If I ever have to change that sensor again, it will be super easy. Appreciate all your time and effort, excellent job with the video.. 👍

Started having some play with the parking brake, this helped a lot!

wouldnt it better if you crank the window down?

This is an amazing video. Would you or anyone here know how to activate the central locking when you put in drive

I'm getting a slight pulse when breaking as well. pads are good, rotor is good so the next step would be checking the caliper pistons. These things can be difficult to diagnose. This vid helped. All your vids are very helpful. Keep up the good work.

Did my install yesterday…Thanks for the helpful video! Now I only have to figure out a small issue with the switch I used 😀 Light works well but the switch is not playing well with my dash/tail light circuit.

Thanks for the video. Doing this job on my 2001 Sequoia today.

Buying my first cayenne in the morning. Looking forward to experiencing the cayenne. Getting a 2005 turbo. It needs the rear door struts so watching as many videos as I can to learn how to do it right the first time

Awesome vid - REALLY hope I don't need it! Gotta replace my sensor now...

Do you have a link to the diagram?

You saved my ass something fierce. The entire plug came off the wiring harness leaving me with zero idea which wires went where because the ones I got from Amazon had 3 white wires. (Brilliant, Amazon seller, just brilliant). Try as I might I simply couldn't find anything that would actually show me the money without jumping through hoops. TY!

Hey Kamal, thank you for this video. Same thing has happened to me 2006 Tundra. Was planning to work on it tomorrow when this video came to my feed. Thank again, very helpful.

You should hear my 03 g35 coupe

U think that’s bad

Thank you. It came out perfectly the way you said to do it. 🙏🏽

Nice shirt

I used a very small tube insert to the bottle of the reservoir and suck the oil out by a small usb water pump. It worked pretty easy. The long small tube connected with bigger silicone tube and to the pump.

Wow can't believe I didn't look into this more when I needed to do this. Mine was working still but was making a chirping/grinding sounds so I wanted to replace it. I had my mechanic do it wasn't too expensive think like 500$ Canadian but had I know it was this easy I could have easily done this myself. The part is cheap too so would have cost 100$ max. Oh well. You live and you learn.

Thank you! I installed a new one on the same window and it didn’t lie flat to the window to seal. Probably because I bought it on eBay and not OEM 😂

Parts lists, please, thank you brah.

Going to try on our Rav 4. We are about to get rid of this POS if this doesn’t work. Thing beeps even with our seat belts on. Nothing but issue after issue with the Rav

Thank you for this video, now my struts are changed to new ones. Just the electric opening left to get to work. I did not have to loosen the c-pillars.

managed to install it but I thought it was going to sound the sutututu, do you know why?

thank you! porsche is quoting me $900 for this! i know i can do it myself!

What size bit is used to remove the axle bolts?

Thank you this video was top notch for info on how to do this myself. Please make more informative vidoes.. you are now my go to for fixing my 2012 Mazda three.. if you could I need a video on my automatic door lock buttons which arent working

Hello, and thanks for this vídeo, but, whats the solution?

Yikes

Hello, I am Sakib Ahsan Tamim. And you? Hello, I saw that in your content quality is good, but not getting much engagement, Then, I analyzed your YT channel and I saw that in your channel have some problems, that's why your channel is not growing. Your videos is not reaching to targeted people, not getting engagement. Do you want to know these problems? If you can give me permission I can tell here, . Where Can I tell? here or email? fb, twitter, telegram, Instagram, anywhere I am available, also here. Where you want to gain this knowledge? And also a question, how are you>? I am good...I like your videos. Subscribed

Good to see you guys Kamal. Great vid.

Hey Kamal ,Miranda good video the metal piece is for baby car seats if my memory serves me right it secure the baby seat better you could remove it if you desire so .

That's really good to know! I've seen lots of talk about the issue but nobody has ever pointed that out. I've had my 05 turbo for 5 years with bad trunk shocks. I don't use the trunk often but I do plan to sort it soon. Loved the story about your car as well!

Came to this video because I was trying to figure out that plate... I bought mine with the rear seat backs detached. I figured the plate tucked away or something..I assumed my belts were factory. I have the plates on both sides. If you ever figure it out let us know.

Did you start the engine or turn on the accessories after turn signal lights flashed?

To be clear, is it: Key in, turn all the way on (ignition on) Immediately press and hold odometer button Hold for 10 secs and then click in seatbelt while still holding odometer ? This sequence is not working for me in a 2012 FJ cruiser Trying to figure out why?

I’ve been driving this FJ for years without knowing how to quickly disable this 🤯

This is a manual 350z ? Also good video you should make more

Thank you

Do you recommend any particular strut brand? Are the Porsche original ones the strongest?

kzbin.infoH9nmHy7bd7w?si=xXGecBTOX83mv1sV Sorry to tell you but

Just broke my yesterday in the exact same way. Saved the second as I learned from the first one. Ordered the replacement and will be doing through the push connectors. Video really helped. Thank you

Thanks. This helped make it super quick and easy.

Thanks, I didn't know I could remove that button, I've now taken it off my sim rig quick release, and it's much easier without it. 👍

Thank you Kamal for the tip! 👍

Getting ready to do my 2008. I really appreciate the time you took to film and edit this. Thanks!

Thank you dude!!! watching this gave me the thought that the blower motor might not be shot yet. After opening the passenger side up and getting at the motor, all I did was clean out the nests/debris from there as well as the cabin air filter area. While the motor was open, I turned the Air on and spun the motor with my hand; it spun right up full force. I don't know if it was because the motor had sat long enough and couldn't get itself going without help/some debris in the motor, or if it was the amount of garbage surrounding the resistor initially. Worth a try for anyone who gets to the point of opening up the motor on the passenger side before tearing the whole thing out. I'm sure I'm just buying time, but it's still saved me some money for right now. Also if you're gonna go for it, probably spin it with a screwdriver or something not your hand😅

Ditto...thank you.

I love how we all came here to flame bro on the pants. He has some great info the, respect