Jorge Rangel

Пікірлер

@olgatorres276 6 күн бұрын

Quedó muy bien yo puse uno pero no salieron las millas xq sería aiq aserle algo extra ?

@Jorge.Rangel 6 күн бұрын

Tienes que mandar el tablero a reprogramar. Ai solo pocos lugares que conosco solo por Internet que lo hacen. Donde yo mande el mio fue a WAMS

@olgatorres276 5 күн бұрын

@@Jorge.Rangel gracias x contestar buen día 😃

@justinvanburen8259 6 күн бұрын

Great video!! Thanks

@nathanbreazeale1852 14 күн бұрын

Mine don’t work,new one has three prongs and old on has five.

@Jorge.Rangel 14 күн бұрын

Different part number?

@nathanbreazeale1852 14 күн бұрын

@@Jorge.Rangel idk,everybody was saying they were all the same so I didn’t pay attention.

@nathanbreazeale1852 13 күн бұрын

@@Jorge.Rangel I adjusted the old one to cold and left it unplugged for now.

@AdamShelton-iy3os 19 күн бұрын

What crossbars are you using?

@Jorge.Rangel 19 күн бұрын

I can't remember the brand but it was a cheap one off Amazon. No more then $100 for sure.

@szfreddy402 27 күн бұрын

What size light bar is that? Fits perfectly

@Jorge.Rangel 27 күн бұрын

32" curved

@cuate_lit Ай бұрын

my question is how do u wire the volume for ur radio to ur steering wheel

@Jorge.Rangel Ай бұрын

The first part of this videos I showed how.

@Jerry-Lerry12 Ай бұрын

Could there be a reason why when I did mine the air just goes to full blast doesn’t let me control the air it’s full Blast or nothing

@Jorge.Rangel Ай бұрын

Not sure what year vehicle but could be that is not compatible or the part itself is damaged.

@DJ-mv1en Ай бұрын

Bro u ain't even show how it look 🤦‍♂️

@Jorge.Rangel Ай бұрын

Is not meant to show how it looks after. Is to show you what needs to be done in order to bring out the wheel to match the front. Trust me it looks 1000% better as now they stick out the same.

@superdragon9293 Ай бұрын

are you still runnin cats????

@Jorge.Rangel Ай бұрын

Not the last one

@oscarbaeza4526 Ай бұрын

Will this specific spindle work on the same truck but 4wd?

@Jorge.Rangel Ай бұрын

It should.

@TravisCadello 2 ай бұрын

I wanna see the digital Denali gauge swap…

@Jorge.Rangel 2 ай бұрын

Is on here brother. Part 3 is the denali cluster.

@karl95100 2 ай бұрын

Cuánto cobras por hacer una actualización de volante, cluster y estéreo en una duramax 2017 austera

@Jorge.Rangel 2 ай бұрын

No lo ago para la gente. Esto solo lo hize para mi, es mucho riesgo hacerlo para alguien más y que algo pase mal y yo tenga que pagar para comprar partes nuevas.

@daringendrek6074 3 ай бұрын

Please help me to install the DRL. What do I connect the red and black whites to?

@brennon34 3 ай бұрын

Ok thanks.. you know anywhere I could get the full console like you ? Or was it like eBay or something?

@brennon34 3 ай бұрын

I have a 2018 Chevy Silverado 1500 custom extended cab. What center console type should I get ?

@Jorge.Rangel 3 ай бұрын

Any center console from any model of that year should fit. Even center consoles from 2014-2018 should work.

@brennon34 3 ай бұрын

thank you! Are there trim covers or anything that I need to? Or is it just the screws that go in that attached to the truck ?

@Jorge.Rangel 3 ай бұрын

@@brennon34 depends where you buy the center console. This one I bought from someone included everything minus the wiring harness

@colliermcgowan 4 ай бұрын

Hey man are you on 33s or 35s

@Jorge.Rangel 4 ай бұрын

@colliermcgowan 4 ай бұрын

Do you think you could fit 35s

@Jorge.Rangel 4 ай бұрын

@@colliermcgowan no, with this I still had to trim the bumper a little and also the back part.

@bake650 4 ай бұрын

Did you ever have it throw engine codes?

@Jorge.Rangel 4 ай бұрын

Not with this.

@bet36972 4 ай бұрын

Might still be under warranty.

@Dunkam69 4 ай бұрын

Hi, I have the same case and the problem is that the window to see inside is small is located in a part where you can not see the lighting and the effects of the new water cooling with ARGB I've put. Could you explain me how you did the process to make such a large window, that the edges were well and to anchor it to the chassis of the case?

@Jorge.Rangel 4 ай бұрын

That's basically a plexiglass panel. I just took measurements of the opening and cut the plexiglass to that size. Then I painted black the edge to cover the case frame. I then bought a drill bit that makes holes with threads and bought 4 screws in that thread size to hold the new plexiglass panel.

@Dunkam69 4 ай бұрын

@@Jorge.Rangel Thank you very much for taking the time to answer.

@user-sy2wu2fs6f 4 ай бұрын

Tengo una 2017 chevy silverado wt ya le cambie el cluster y el steering wheel cres k si conecto los cables al estereo trabaje kn los controles y funcione kn un estereo aftermarket ?

@Jorge.Rangel 4 ай бұрын

Con el estero original no creo que funcione almenos que ya aiga reprogramado el cluster y radio a su vin. Con un stereo aftermarket nose porque yo no lo trate haci

@user-sy2wu2fs6f 4 ай бұрын

Ok .. el cluster ya esta progamado. Solo k kiero ponerle un alpine y kiero k funcione kn l0s cotroles del steering wheel

@Jorge.Rangel 4 ай бұрын

@@user-sy2wu2fs6f si ya esta programado entonces si debería funcionar con el estero original y también con el alpine. Ellos incluyen los adaptadores para que funcione todo.

@user-sy2wu2fs6f 4 ай бұрын

Ok.. le voy a calar aversi funciona .. gracias

@UhaniNaluSurf 4 ай бұрын

Great and only video. Much thanks. Had broken steering wheel bezel.

@countryman4691 5 ай бұрын

Hardly any air comes out my factory exhaust pipe.Pitiful.

@tresuire9587 5 ай бұрын

Did it plug right up?

@Jorge.Rangel 5 ай бұрын

Yes

@sunnyswoodworks3110 5 ай бұрын

I have a WT with io3. I want the wheel controls to work and already have a Denali cluster. What’s the lowest Io I would need to upgrade? Io4 or higher?

@Jorge.Rangel 5 ай бұрын

Is been a while but I believe io4 round be the minimum. Price wise not sure you might be able to do a newer one for the same price.

@deeblocctv6141 5 ай бұрын

What if mine is blowing cold on drivers side while heat on Passenger side is hot

@Jorge.Rangel 5 ай бұрын

And driver side doesn't change? Always stays on cold? Then is the same issue it just got stuck on cold.

@mauriciorodriguez2448 5 ай бұрын

I dont have the heated rear view shield what would that button turn into? Or would it just be what the original button was?

@Jorge.Rangel 5 ай бұрын

It would be what it was before. If you didn't have it then that button won't do anything still.

@lindseywagner7510 6 ай бұрын

You labeled this driver side but your on the passenger side

@Jorge.Rangel 6 ай бұрын

According to Google and all I read, this is how is called. Passenger side is behind glove box behind a bunch of stuff

@averygentry35 7 ай бұрын

lol what screws

@motormandave 7 ай бұрын

I’ve been going crazy for a while with this. On the money!! Thanks for this video. Problem solved 💪🏽

@Steelmanfan1111 7 ай бұрын

U didn't do the battery rite bro.the back comes off of the battery side.

@carywhozawhastit2024 8 ай бұрын

Was it a T-25 or T-55?

@39doritoz 3 ай бұрын

t55

@kennypowers99 8 ай бұрын

Thank you bro Ive been looking for the how to video to take these out a paint them for a few hours.

@YouKnowanth 8 ай бұрын

(UPDATE) I found a bypasss on how to make it work so it works perfectly fine without needing to reprogram anything. And so it turns on and off when ever you want too. Just make sure when you’re about to turn off the truck make sure the AC is on and blowing air and you should be good to go, that way next time you turn on the truck the ac blows. Then you can turn on and off the ac while your driving just make sure the AC is on before you turn off the truck

@YouKnowanth 8 ай бұрын

@stephencrouch8911 8 ай бұрын

good video and i know how this is gonna sound but i can’t not say it now a screw and a BOLT are not the same

@vickyaguilar4588 8 ай бұрын

Hey bro so what about on your tablet ? Does the music transport to your radio?

@Jorge.Rangel 8 ай бұрын

Yea it plays through Bluetooth to the trucks radio, just like your phone connects to the truck.

@vickyaguilar4588 8 ай бұрын

Oh okay so In order for the tablet to work you gotta use that same radio for it to connect with BT

@Jorge.Rangel 8 ай бұрын

@@vickyaguilar4588 if you don't have this radio and if you have a third party radio as long as it has Bluetooth then it should work.

@Empower-master 9 ай бұрын

Bro thank you I disassemble the whole glove compartment before this video lmao

@kevinyoung947 9 ай бұрын

My next job, only v6 version i saw thank you

@charlesmaroon8819 10 ай бұрын

Thank you for showing the exact placement of the reinforcing bracket.

@sartainja 10 ай бұрын

Superb video. Was wondering if that switch out would work. Really informative and interesting video. Thank you for preparing, posting and sharing. 👍

@jonathanjauregui1808 10 ай бұрын

Did you add heated seats to your work truck?

@Jorge.Rangel 10 ай бұрын

No, that's one of the few options you can't add along with cooled sears if it didn't come with it from factory.

@BowtieClusters 11 ай бұрын

from my experience you need to have the cluster programed to have it work in your truck when doing this upgrade. did you end up getting it programmed.

@Jorge.Rangel 11 ай бұрын

I did it the correct way, this videos are to show people how to do it right and to show what happens when you don't do it right.

@billdavis5936 11 ай бұрын

This dude is an idiot

@ianmorales5500 11 ай бұрын

Does that middle rubber peice along the entire top side come off to reveal a channel? In order to mount stuff?

@Jorge.Rangel 11 ай бұрын

Never tried to remove it. I don't think it would be worth it.

@wackojupiter2163 11 ай бұрын

How in hell did y'all get that 1 bolt out 😂 ive got them all out except for that 1. Cant get anything to it to get it

@whitefunk100 11 ай бұрын

Hi, so have to have cluster controlled from steering wheel (plan to change steering wheel and cluster, radio is android already so do not need radio data on cluster) I just need to connect that yellow cable from steering wheel to cluster? Cluster pin is 20 and steering that green one

@Jorge.Rangel 11 ай бұрын

Yes I believe that is correct for cluster comtrol. Don't know how well if will work with your radio as is not the oem one