I know this video is old, but I went with a Borla exhaust and it has such a nice low growl at low idle, and a roar when getting on it. Would definitely recommend
@geobigntall38305 күн бұрын
I think it sounds fine.
@alphasogge364010 күн бұрын
Does someone know where to find these gaskets for the backlights ?
@sandifreyer947611 күн бұрын
Thanku for all the info...i was thinking about this car, but i think i will go with Volvo or Lexus
@lDT480012 күн бұрын
This is what drive only my second car so it still greats for daily drives
@REgamesplayer13 күн бұрын
Insurance in Lithuania is like 100-200 euros per year. You shouldn't involve financing and insurance in ownership costs, because those things are totally dependent on a nation in question and how new car is. You did well to separate them while number from google is an absolute BS.
@REgamesplayer14 күн бұрын
Laughable problems. GR 86 for example has oil starvation issue which wrecks the engine if you dare to take track car for tracking... This Genesis Coupe just seems to me like a garage queen. Sadly, I do not own a place to put this car in. I will have to settle for something less like VW Scirocco.
@Blazer-el4vm17 күн бұрын
How is a straight pipe isr gonna add less HP 🤣🤣
@Jaime7188Ай бұрын
I've always loved the genesis coupe 3.8, but no, they're not fast.
@GotherYTАй бұрын
dude this car is SO SICK I want one so bad, and your hair in this was super cool too ngl
@anthonywilson6611Ай бұрын
I don't understand the thumbnail. Unless I just don't understand how KZbin works. You put "money pit" on the thumbnail and then proceed to tell us that the car only costs you 400$ a year in maintenance. Which is exactly why I skipped to the end. So fuckin stupid. Just tell it like it is. Why all this elaborate horse shit?
@oOs4MzOoАй бұрын
How long with this last b4 it leak again?
@MartinnordbyАй бұрын
The 3.8 is a great motor. I've had my coupe since new (2010) and have put 227,000. The early 4 especially had serious problems.
@gabelaucella4044Ай бұрын
You can’t just do full bolt on and not put a tune on it😂😂
@goofyop4365Ай бұрын
I ended up putting ark downpipe and test pipes with the ISR race exhaust and noticed no power loss if not more power gain. I don’t even get the lag you were talking about. I feel like it may be the different mods added
@bubbleblower1908Ай бұрын
Will this work on 2016 coupe 3.8 ?
@warmachine2.046Ай бұрын
60mph right ?
@joelong4042Ай бұрын
your voice is annoying...
@villanuevacanoAbel888Ай бұрын
😎✌️⭐🍀😈😈😈
@Genny_Woo2 ай бұрын
BK1 exterior literally looks better
@AnarkiFTW2 ай бұрын
i know im 4 years late but im 99.99999% sure you put the light assemblies in backwards. There's little mirrors on one side of the housing to bounce the light towards the center of the plate, not away from it. you can really tell @ 9:21 in the video. love the car tho!
@RawApeFromAlbion2 ай бұрын
weak ass transmission........ the rev meter is climbing up super slow and 2nd gear to 3rd is weak, sounds like all the power dies off. I don't believe this car is 360hp
@_xsoo_4162 ай бұрын
i think i heard the removed the turbos from the 2.0s in some years, is this true?
@spazzedonrl2 ай бұрын
i know this was 2 years ago but what tune did you go with i have a 6 speed and want that 2 step
@villanuevacanoAbel8882 ай бұрын
😎😎😎⭐⭐⭐⭐✌️💎💎💎
@user-su8rb7zj7c2 ай бұрын
i have a mxp catback on my blk1 and holy shit is sounds insane
@B8con8tor2 ай бұрын
Your sunroof drain tube is probably blocked in which would cause the water leak on the floor
@troypickard2982 ай бұрын
Why you got something to not dislocate your shoulder when getting your seatbelt? I need that contraption
@justahyundai2 ай бұрын
if you actually live in quebec, or 99% of canada really, this setup is literally an undrivable joke. wtf?
@ronlee29772 ай бұрын
The head lights automatically adjust upward
@ronlee29772 ай бұрын
Clean the vent close to the hood, then use silicone to glue the plastic between the hood and window
@souljagirl65532 ай бұрын
Just came across this video. This was 4 yrs ago, but what year is the car???
@strictlyguitar9792 ай бұрын
Will this work on a 2.0t?
@teehenessy30202 ай бұрын
Like most cars... Only a shit box if u make it one.
@turdferguson44472 ай бұрын
Bruh 2024 I googled what do people use to test 0-60 and one of your videos popped up must be good!
@SamIsHereFella2 ай бұрын
I KNOW WHY YOUR TRUNK LEAKS mine has no leak problems! It’s because of his spoiler aka mods to the back of your genesis!
@Gabriel-pj2bk2 ай бұрын
Not a hater, sounds too close to stock for me to spend the $$$$
@RTGBANKS452 ай бұрын
I’ve hear this is bad for the car and can blow somthing if it’s stock, I have a 3.8 coup an do it all the time but family member have told me if it stock and if I don’t have to part for it to pop that it can cause damage
@getfitron1553 ай бұрын
That’s a front lip not a splitter
@donaldprince78533 ай бұрын
VERY NICE. I did the max bore on mine as well best bang for buck. until 100 shot took all the love, but last dyno with mostly bolt ons and 100 shot i got 453 to the wheels. same setup as yours different tune though. of course i did pulleys and such as well.
@Pritesh_13063 ай бұрын
Can you pls drop the link of the product again? Description link don’t work anymore
@middlesc3 ай бұрын
7:30 are the headlamps not adjustable?
@letshang68803 ай бұрын
im so lost how do i get one with padle shifters
@axeandace77283 ай бұрын
Im planning on purchasing a Genesis Coupe 3.8 in 2025. Is it still worth it?
@AMGKyz3 ай бұрын
gogogo
@geobigntall38303 ай бұрын
I’ve got some bad butt ESR rims 19s x7 in the back 6 in front white inner and polished aluminum outer, let me know if you interested they need a lil sanding on front because of verry light curb rash, totally fixable. I’ll be selling them cheap after I change to a meaty 18, these ride too ruff for me. Comes with khumo low profiles, our roads are to rough here in lousyanna lol
@taylorshea68563 ай бұрын
My issue is the chrome on the door handles started flaking off but it’s sharp and stabs my finger like every finger was covered in slices and cuts so I wrapped it with paper for the time being😭😂might just take the whole thing off the dip the plastic in chrome and heat it to the plastic tho instead of wrapping it in something else that will just fall off in the future
@jaysoncrider54313 ай бұрын
The water bit in the trunk was an easy fix. I'm a mechanic took me 30seconds to find the issue and just a little permatex had no issues. The problem is in the frame lines, there's a small gap above the tailight.