Thanks. I went through various options with my client, and although there are many configurations, they opted for this 👍🏼

Thanks 👍🏼

Thank you. Here is a link to the drawer runners: amzn.eu/d/3KYXQC0

Cheers. Yes you can make the box deeper. Just bear in mind that if the box is 700mm deep and the rail is 600mm in length 100mm of the box will remain in the carcass once it’s fully opened 👍🏼

Thank you 👍🏼

Thank you and Happy New Year 👍🏼

@ happy New year 🥳

Hi - I used overlay hinges on this one. There is some adjustment on the runners but not a massive amount. I have started talking on later videos, check them out and see what you think. Cheers and Happy New Year 👍🏼

😆😆😆 Happy New Year 👍🏼

@@theyuppychippy Happy New Year to you, too!

Thank you and Happy New Year 👍🏼

Agreed, but I am a peasant joiner and simply cannot afford one. However, Santa is coming… 🎅

Thanks. In my experience biscuit cutters always cut slightly loose. You can get different connectors for different applications but you’d need to upgrade to a Lamello or a Domino 👍🏼

@ going to invest in a domino been saying it for too long ha… 👍

Very jealous, I may have to invest too 🙈

Thanks 👍🏼

Here is a link to the drawer runners: amzn.eu/d/3KYXQC0

Thanks. The MDF is 18mm and the router bit is a V groove cutter 👍🏼

⁠@@theyuppychippythanks alot mate, shame your not closer, ill be giving this a go. 😊

Good luck with your project 👍🏼

Thanks

Sure, I used push to break switches. Here is a link to the product: amzn.eu/d/07yb6Wu And these were the LED down lights I used: amzn.eu/d/6qOTyKu

Good question. There is a word missing. Floor? Did you mean floor? I’ll presume that you did correct me if I am wrong. I would scribe to a finished floor, however, this was a screed subfloor waiting for LVT to be fitted. The panel would be raised the thickness of the LVT off the floor so the LVT could be slid underneath for a neat finish. I use window packers to achieve this. Also, as there was another cabinet going next to this one so you would only see the front of the panel. Thanks 👍🏼

Thank you 🙏🏻

Thanks. Yes I do secure I to the ceiling. I don’t necessarily film all the work as it becomes quite time consuming 👍🏼

Thanks. I found them on Amazon. Here is a link to the product: Yizhet 20 Pcs Strong Magnets,... www.amazon.co.uk/dp/B0B8Z2CD5Q?ref=ppx_pop_mob_ap_share

Thanks. I use Spax 3.5 x 50. They work a treat 👍🏼

Thanks 👍

It’s been too long 😊

Thank you!

Thanks. The runners take 45 kilos per set. I used three runners so good for around 67 kilos 👍🏼

@@theyuppychippy brilliant. 👏

£30 on Amazon for 100kg for 800mm runners!

Glad it helped 👍🏼

Yes I would say it is an alignment issue. Refit them rather than trying to adjust them is a better option in my experience 👍🏼

MDF because that was the client asked for. Beauty is in the eye of the beholder, you know that. And yes MDF, like all materials, can warp. However, once it’s sealed and protected this is highly unlikely to happen (hence MDF being used widely in furniture making globally). This is true in my experience as I haven’t had one warp in 17 years. Do yours warp?

The client wanted a repair and not a full replacement, so I did what they asked 👍🏼

Thank you. Here is a link to the drawer runners: amzn.eu/d/3KYXQC0

Thank you 🙏🏻 Here is a link to the product. It wasn’t expensive but it is really accurate and working well two years in. amzn.eu/d/ijJSssz

I designed it myself 👍🏼 You can watch the full video here: kzbin.info/www/bejne/mWXYpHeMiLOSjdk

@@theyuppychippy

Cheers 👍🏼

Thank you 👍🏼

Thanks 👍🏼

Thanks 👍🏼

Hi - I use push to open drawer runners and door catches. These naturally create a small recess behind the frontal to allow function. Hope that helps 👍🏼

On this occasion I didn’t need to as the original pegs did stay intact. I will be back in a few months so if there has been any movement I can deal with it then 👍🏼

My pleasure, thanks for your support.

It’s just my way, there will be many other ways to do it though 👍🏼

Noted!

Thanks 👍🏼