JDE

Пікірлер

@zubiak524 Күн бұрын

Thank you so much I'm tired of male mechanics ripping me off

@1Patient 22 сағат бұрын

@@zubiak524 Glad it helped you out. Have a good day.

@ChunkaChunkaroo 12 күн бұрын

Thank you, kind sir. You are an amazing soul. I was able to retrieve my key in 30 seconds.

@1Patient 10 күн бұрын

@@ChunkaChunkaroo Glad the video helped you. Thanks for watching and the kind words. Have a great day.

@jothis26 24 күн бұрын

What call that wee bulb inside headlights please

@drunkengaming5960 28 күн бұрын

What's the flat screw for

@1Patient 28 күн бұрын

Thanks for the question. I just use the screw driver for a lever to pull the grey tab if I have to . Have a good day. 😃

@briang530 Ай бұрын

The 36" one that I bought makes short work of almost anything and has lasted 5 years of extreme abuse like breaking bricks and being smashed into things with a sledgehammer.

@DiscipleOfYahusha Ай бұрын

That second clam that u were tightening with blue screwdriver.., what does it connect to

@1Patient Ай бұрын

The water outlet that goes to the rad. It's a larger hose, probably 2" or 50 mils in size

@peterchang4601 Ай бұрын

A sure way to find out about bearing is to lower the oil pan and check for metal particles. I have a knocking sound on my 07 Camry, so far, everything checked out ok including cylinder walls. The last thing I'll do is to check my oil pan (it may be just fine, since the noise goes away when warmed up). Your noise seems to get less as the engine warms up.

@RamboBlood-bw8ey Ай бұрын

Sir that's normal. Don't worry about it. The anvil is very short compare to the socket in size and length. The socket is long and the anvil is short which creates off balance that's to be expected. The weight of the socket is also heavy to from the end of it which creates the off set spin. Hold the end of the socket as you spin it try balancing it. Center of gravity will balance it from one end of it.

@1Patient Ай бұрын

Thanks for replying. I suppose that makes sense. I was using the M12 Stubby 1/2" with the 3/4 socket and really didn't notice it wobbling around in the work space. Otherwise, ya, everything seems "normal" Have a good day.

@joeygordon7265 Ай бұрын

How does it work with the 2.0 battery? Does it perform well or is it weak?

@1Patient Ай бұрын

It Kicks just as much, just not as long. Thanks for watching. Have a good day. 😃

@joeygordon7265 Ай бұрын

@1Patient Thanks for the polite response, and have a great day as well. Appreciate that 💯

@MrCaribe65 Ай бұрын

@joeygordon7265 Use st least a 3.0ah HO battery if you want to get good power. Th 5.0ah battery works like the 3.0 but lasts longer. For the best power, the 6.0ah HO or a forge 6.0 will give the most power. Oh, don't forget the new M12 Stubby that just came out if you haven't already bought this one.

@joeygordon7265 Ай бұрын

@@MrCaribe65 It literally got delivered today. I am looking into the battery now...

@joeygordon7265 Ай бұрын

@@MrCaribe65 thanks appreciate the feedback

@BOON613 Ай бұрын

That's a good message to get out. Instead of playing games, get a little workout in. Thanks for the positivity my friend!

@1Patient Ай бұрын

Thanks for viewing and positive comment. Have a good day.

@ChrisDaniels-so3cp 2 ай бұрын

Bro will complain about anything.

@1Patient 2 ай бұрын

@@ChrisDaniels-so3cp I'll complain about you too Chris give me something to work with. 😃👍🏻

@ChrisDaniels-so3cp 2 ай бұрын

@@1Patient NO!

@1Patient Ай бұрын

@@ChrisDaniels-so3cp Fine, be it as it may be. Thanks for viewing and have a good day.

@Rokuro1 2 ай бұрын

Bro thank you, my headlight was not going in, and the old gasket was stuck in there, sliped right in

@1Patient 2 ай бұрын

@@Rokuro1 thanks for watching I'm glad that the video was able to help you out. Have a great day!

@RockstarFisheye 24 күн бұрын

Same for me. Didn't know I had to remove the old gasket lol

@Helk_gt 2 ай бұрын

I searched dildo

@rodrigobrigante6286 2 ай бұрын

absolutely normal chain noise

@royanderson3478 2 ай бұрын

Top tube, on the side? A signature? Or that is Masi? Thanks

@1Patient 2 ай бұрын

@@royanderson3478 signature by Masi. Thanks for visiting. Have a good day. 🚲🚴

@josenevesneves7880 2 ай бұрын

Olá seu comando é original?

@Triple6gz 2 ай бұрын

Can you use this with fire caulk

@1Patient 2 ай бұрын

For sure you can. You know how fire caulking is, so might make the gun messy. If you need info on other guns check out my other videos kzbin.info/www/bejne/n6uypYytqpt_nLcsi=0MFnW_51_ja_xrYT Thanks for viewing. Have good one bud.

@renukakassel1179 2 ай бұрын

How many bedrooms are there.

@1Patient 2 ай бұрын

There are different suites with different price points. The name of the property is www.thebristol.ca/

@renukakassel1179 2 ай бұрын

How can I see it

@1Patient 2 ай бұрын

@renukakssel1179 check out this website>>> www.thebristol.ca/

@renukakassel1179 2 ай бұрын

I want to see it

@Debbie19W 3 ай бұрын

My mower!! It will be 19 years old in July. I just had the brushes replaced - runs great! I had bought & returned a MM2000 because the handle length could not be adequately adjusted to fit my height. I was glad to get the old Lawn Hog repaired. At 6:30 you had the problem with the blade hitting the nut. Was that problem resolved just by smashing out the debris under the hood (8:36)? Sort of a realignment or did I miss something? Thanks for the video!

@1Patient 3 ай бұрын

Thanks for commenting Debbie. The issue with the nut wasn't an issue and resolved itself once I used the mower, and secondly, the debris had nothing to do with the blade mechanism. Keep your tools clean 😃 Have fun mowing. Thanks for watching.

@qkcam45 3 ай бұрын

any suggestions ? I can get the lock to pop up yet as soon as I take the antenna out the lock drops and can't get in. thanks

@1Patient 3 ай бұрын

Use the bottom of the antenna insert the bottom part under the handle when you lift it. I know it flexes and feels spongy when you are pushing up on the locking mechanism inside the door. When you lift up on the handle don't pull up too much, when you wiggle the antenna lesson the pressure on the handle so the locking mechanism can have less friction/pressure on it, allowing it to, ummm, slip into the unlocked position. Also, hold the antenna close to the door handle when you are wiggling it, so as to maintain the stiffness of the antenna as a tool. Keep working it, it will take a few tries... You are on right path, stay the course.... let us know how you did. Thanks for watching 🙂

@ricky4924 3 ай бұрын

I have two full sets of these one set I’ve had for 10 years , I will never own another brand ever

@1Patient 3 ай бұрын

I bought a second one as well recently and its my daily driver. Hope your having as much joy with your bars too. 😃 Thanks for watching.

@realone4261 4 ай бұрын

Your awesome

@1Patient 4 ай бұрын

Thanks 😃 for Viewing. Glad things are going well now.

@RashanBRA 4 ай бұрын

Wow

@louisbeaulieu1066 4 ай бұрын

Not to many video on this thank you !!

@1Patient 4 ай бұрын

Thanks for viewing. Have fun tooling on your vehicle.

@vermagnus2647 4 ай бұрын

You are teaching the people wrong man

@1Patient 4 ай бұрын

It was my first attempt. I have learned much since the video was originally made. 😃Thanks for viewing.

@moparlarsson 5 ай бұрын

Expensive? Perhaps but it's a once in a lifetime investment and you can't say the same about much these days. We get one for about 1000sek here in Sweden.

@chriscolameco6850 5 ай бұрын

Think that adapter will work on the ridgid?

@motojgiveaways1451 5 ай бұрын

I have the same exact head unit. My phone automatically connect to the head unit via Bluetooth. If I get a call the cal comes through just fine through the head unit. My problem is the Bluetooth option under source on the head unit to play music through the head unit. Please if you have any advise let me know

@creamfiend84 5 ай бұрын

Installed an Izumi eco onto my omniums this month, initially it sounded noisy, this is pre-ride. First test ride was not as noisy I’m guessing my weight and road contact was a factor, second and third ride a little sound but stealth like. This is my new dream build a leader kagero so I was stoked riding it any sound from the chain was kind of irrelevant 😂

@jhickz 5 ай бұрын

What do we use flat head for?

@1Patient 5 ай бұрын

😃 I guess you don't need the flat head, if you have finger nails, Thanks for watching.

@gallagherneylon6966 5 ай бұрын

🙃 'Promo sm'

@juliodg2139 5 ай бұрын

good video, great selection of impact tools, I bought the same one at Home Depot, when I opened it it came without a plastic bag, I'm intrigued, I've seen many unboxings of this impact tool and they all come covered in a plastic bag., the bag is nothing, but I don't want something that someone returns, you know, well, thank you for your video sir.

@1Patient 5 ай бұрын

Thanks for Viewing. I don't blame you. I bought the M12 Impact with a 5.0 High Output battery, and when I looked at the battery package when I got home, it was slit open on the bottom, and upon closer inspection of the battery, it looked like a fake/clone, and it was, I took it back to the Home Depot and returned it, didn't even tell them what happened I just said I didn't want this battery and that was that. I bought another one after I inspected the packaging and the battery more closely before purchasing. They keep it behind locked displays, so, someone must have done a switcharoo or something.

@zaneallen1327 6 ай бұрын

Your crush sleeve probably needs to be replaced

@1Patient 6 ай бұрын

Thank you for viewing and commenting. I have moved on from this project.

@HillbillyRefrigeration 6 ай бұрын

Is that your BFH?

@1Patient 6 ай бұрын

😂Yes, my go to when things aren't going good.

@Chronikx1 6 ай бұрын

Still have any?

@1Patient 6 ай бұрын

I am sorry we missed each other. I had one pair left. Perhaps for the next eclipse... 😀

@Chronikx1 6 ай бұрын

@@1Patientall good! I ended up making a viewer real quick and worked out great

@bradyali8696 6 ай бұрын

Where can I purchase those? Thanks!

@1Patient 6 ай бұрын

I am sorry we were not able to connect. I did have one pair left over. Hope you were able to enjoy the eclipse.

@joemcrane 6 ай бұрын

Awesome, thank you

@1Patient 6 ай бұрын

Thanks for viewing. 👍

@johndiscord9129 6 ай бұрын

hi! a question, my fixed gear bike makes the same sounds as you but when i back pedal, a clicking sound is occuring but not always just occasionally

@johndiscord9129 6 ай бұрын

how do i fix this thanks! ❤

@chapsteronetime2000 6 ай бұрын

I did D 2 for the deaf bonce 8”s 1600 800rms I plan on wiring them to the series parallel down to 1ohm. Now I just did a single sub in my wife’s car 12 CT sounds but I used the $400 digital audio Steve mead shit online to set the hole speaker up behind spline mono 600w etc, I no I hope I didn’t fuck up w these four 8’s!

@Arabella316 6 ай бұрын

𝓘'𝓶 𝓼𝓸 𝓭𝓲𝓻𝓽𝔂 𝓶𝓲𝓷𝓭𝓮𝓭😅

@joseespparza6124 6 ай бұрын

tnkio this help

@derekreilly1039 6 ай бұрын

Was there a 6.2 in some of the denalis

@scottloutner5253 6 ай бұрын

That would be a nice chart all typed up.

@trumanray6626 7 ай бұрын

10.5 will run great on 87 over 11 wont im interested

@dogwithwaffle8006 7 ай бұрын

Yeah but how do you remove it man

@1Patient 7 ай бұрын

torch, heat the ring, could use slide hammer, could just cut it off as well. Thanks for viewing.

@louisbeaulieu1066 4 ай бұрын

With a bearing puller

@elenaives1699 7 ай бұрын

You are my new best friend!!! Thank you !!!

@1Patient 7 ай бұрын

We could always do with more good friends 😃

@againstthywill 8 ай бұрын

Literally got off work. Came in the house. I realized i didnt have my keys and boom. Locked in the truck. Lost the spare key. Been stressing it since 1030 last night. Its now after 4am. Saw this video. Boom unlocked in 5 minutes holy crap! Thank you so much!

@1Patient 8 ай бұрын

Glad it worked out for you @againtthywill Thanks for watching. Have a great day. 🛻

@garrettgiuffre7298 8 ай бұрын

What iron is that

@1Patient 8 ай бұрын

@garrettgiuffre7298 😂 That Iron is a Piece of Crap 60 Watt nextech 6412006 I found out it works better when the tip is tinned properly and that the tip is held securely with the screws that keep coming loose... lol Thanks for watching.

Ең жақсы KZbin

Пікірлер