Nice, thank you 🎉

Bonjour so which one is the best alcool stove ?

Bonjour about trail designs 12 - 10 alcool stove, how long for the flame to light and the stove to be operational ? in seconds or minutes ?

bonjour so which one is the best ?

Great light up, thanks for sharing.

Music far to loud

It fits better on a regular 2 pinter without the trivet making it more stable when turning.

Other than looking a bit wobbly that's great. What a fantastic old thing. That roast looks pretty good. How's the taste so far?

Fuel Blocks I Use, Soup In The Flask, Done Supper Noodles A Few Rimes...

Wowzers, never saw this. Rip lee

Another great company put under by the British government.Sadly

hello, could you tell me, if I use a gas oven, how long do I need to keep the knife in the oven for tempering

Fantastic and really interesting video. Many thanks for posting!!

I love those lamps

Muốn mua. Đèn

Why would you ever use the power plate in your Evernew ?!? People can't read the instructions ?? You use that only during cold weather.

My adventure with woodworking started with Stodoys.

Hello, i would like to ask...i followed the procedure and i dint know why, the stailess foil stuck on the blade. Can anyone help ? What went wrong??

Looks good! Enjoy the knifemaking 👍🏻

My last job before I retired I ended up being the heat treater for a big machine shop and their TIG welder for certain jobs, but was hired as an engineer. Go figure huh? I became the heat treater because I mentioned to the owner that I made knives as a hobby. As the HT guy though I could do my own knives and use drop-off scrap if big enough for knives. I already had a working relationship with a HT company I used them for jobs that wouldn't fit into our oven which was 24 inches deep. Used D2 a lot for paper cutting blades that cut the "FOLD AND TEAR HERE" lines you see on envelopes and other things. HT always the same, 1200, hold then 1600 and hold the ramp to 1850 for 30 minutes and air blast with an air hose and paint sprayer misting water. Temper at 500 degrees for two hours then cryo in between blocks of dry ice in a cooler with 4 inch thick walls of Styrofoam for 4 days or 6 if a weekend was in the cycle. The dry ice had only half evaporated. Then into the HT oven to 1000 degrees for one hour, do not exceed one hour. It will be right at HRC60 with decent toughness for D2. D2 isn't a very tough steel like O1 for instance and if you want or need the toughest knife or ax you ever saw use S5 steel at 59-60 hard. The S stands for shock and S5 is better for knives that S7 which doesn't get as hard as S5. Worst thing you can do to D2 is overheat it by even 50 degrees. 1850 is D2's sweet spot like 1475 is O1's. A temper at 700 degrees the D2 will start getting harder until you hit 1000, it drops fast past there, like 1200 will get you HRC55 instead of the 60 at 1000. Now mind you at 700 it is still 57 hard, but if you want 55 or lower you're not getting it in your kitchen oven. For some industrial applications you need to go softer than HRC 59/60. Keep in mind that hardness is not the end all and be all of D2 as it will hold an edge at 58 as good as 60. What gives D2 its abrasion resistance or edge holding is the chromium and vanadium carbides it makes. As quenched D2 is 63 to 64 hard and 63 is preferable for toughness and too fast of a quench can setup stresses in the matrix of the knife. Knifemaker Ray Rogers told me he had a D2 knife crack and break apart 3 weeks after he finished it, but he had also forged it too. Something he called a nightmare because D2 must be forged at 2000 degrees. SAFETY TIP, wear a tinted face shield if tempted to try it as the light will harm your eyes and even a regular forge is long term harmful as well if you stare into it too much and don't even think about heat treating D2 in a forge. It heats up too fast and easily overheats.

I’ve come across one of these in my garage, could I use kerosene on these?

D2 difficult heat treatment with raping stops to critical temp . Triple temper . I use 99% alcohol with dray ice in a strophe picnic container for cryo , till the dry ice evaporates through a hole in the lid . pour the alcohol back into bottle .

Is that just dust cleaner your using

As you have the instructions do they tell you how many pump strokes to give on lighting and with a full tank. It would have been useful to show how to turn the lamp off as many people do this incorrectly. Also some safety hints, how hot it gets and could burn,especially children. Also never fill the lamp with fuel at the same place you light it as any spilt fuel could catch fire. Keep meths and fuel away from the lamp when lighting and when in use.

Just found your channel through Loz & Zed. Beautiful craftsmanship & wonderful attention to details! I adore the dragons & love all the colors, blending/shading, & stamping.

Great video..but mate, balance the talking bits with the musiks, it blows out my speakers, man!

Excellent vid Rob. I've just picked up one of these stove's from Military mart, And thought id check out some ideas. Great mods buddy, really impressed with what you have done with it. Thank you for sharing mate. All the best, Jay

Finally a realistic workshop video with a fellow English person in it with no bullshit or nonsense contained in it or the video. I love your workshop too as it reminds me of mine when I first started off at the age of 12 Excellent video keep up the great work 😊👍🏻

Well that was very well done and Your Cleaner version has topped the scales for Me !

Really nice shop. A bit similar to mine but a few feet longer. I like the fact that you don't have loads of clutter in your shop. Something I need to aspire to!

Beautiful knife well done sir

Hi....so you have no vapour barrier on the roof or inside of your walls? how is your shed holding up in 2020?

Nice shop. I suggest you lock the shutters from the insude somehow, breaking or removing the outside locks would be quite simple. Saludos. Anaco, Anz.

Dumbbguy here. But.. what are you spraying between the plates

And I did get myself one (or two)! Picked up a Nice hardly used Green M1. Going to check it out in a couple of days when we go camping (At last). I also got a decent Bialaddin Vaparlux 320 which needs a bit of restoration. Subscribed.

In terms of security, a cheap burglar alarm system would do just fine. The alarm box itself is a good deterrent and any one trying to break in wouldn’t have much time with an alarm blaring. Maybe a dummy camera/s on the shed itself too.

About 5 years ago I was fortunate to acquire a vintage petromax 523/500cp that appears unused..I knew and still know very little to nothing about these lanterns... but it was an incredible piece I just had to have. I look at it daily as it is perfect, but I never fired it up. Since recently retiring I am fascinated by paraffin pressure lamps and stoves and am now addicted and learning as much as I can. Researching Utube I found your channel and this video....BY FAR the best and most informative I have found. Thank you! if you ever get to the west coast of Florida on holiday, lunch and beer is on me.

"I recommend this guide: *ioni.best/ww-guide/0oW* So grateful it exists."

Security system stickers and decoy cameras keep em away , all the locks will just attract the fiends and thieves

That’s an awesome workshop but that many locks is just screaming break into me

Great work thanks for the tour of your awesome workshop and wow you have a greenhouse too!

Where did you buy it from

I recently bought one !Got it off Ebay...paid quite a few quid for it...in really good condition.Advertised as fully functional but advised to change the seals and buy a new mantle,which I did.However I had problems immediately with flames rising from the mantle which would not burn white.So did a little research and bought a new vaporizer which cured the problem.Expensive lamp now though!

I have found this woodworking book “Bαzοmο Tdy Plαn” (Google it) well suited for me. Not just does it cover wood working techniques, however it even describes the development cycles of trees that lead to the characteristics that craftsmen find advantageous in lumber. I also provided my dad another copy. .

I was researching and trying to describe about my stay up in the mountains of Lebanon where they still use this kind of lighting, and came across your video.. Thank you, it helped

Beautiful workshop, love it!

OSB board ! 😂😂 its just OSB or a sheet of OSB lol

Bloody wife’s get there say in every time 😂shame you didn’t paint it all white before you moved in and get some cough medicine 😂😂😂

R.I.P lee

Nice it’s good to see someone who hasn’t got all the money in the world, this video really appealed to me as I am in the very early stage of doing my workshop