Great vid with a great smile, cnt wait for mines to come through the post!!
@stevieray2903Ай бұрын
The info that I needed. Thanks.
@LEM19284Ай бұрын
That dern hat is not your friend, huh? 😊😊
@lennonjames3871Ай бұрын
35+ yrs just use a brush.
@paulcampbell8696Ай бұрын
For future reference, even filming this video at HALF the distance from the unit that you're currently at would have helped immensely. I can barely see any details that I could just be observing myself.
@johnturrell9422 ай бұрын
Don't waste money and time. Just buy a decent brush.
@boonskyler2 ай бұрын
Thanks, trying to make square pipe table, cannot the fourth pipe to fit in keep get more parts to get to work.
@drmodestoesq2 ай бұрын
Thanks for emphasizing the need to constantly measure and use a level. I made a small table and just screwed it together thinking it would only be a couple millimetres out of level. And there was a half inch wobble in it. The legs will be completely different lengths if you don't measure as you go.
@user-nx8mf3th1u2 ай бұрын
Thank you! With $2.74 spent and 5 minutes, I was able to fix my toilet that's been slow leaking for 10 years. I've looked it up before, but I never found the same setup until your video.
@ransfordapresse89642 ай бұрын
Please do we have this tool available in Ghana?
@gulllllll13 ай бұрын
Wanted to put this on our bedroom ,but not sure as I don't want any one hearing me and the Mrs going at it 😅has any one done it this
@crystalmason91083 ай бұрын
How sturdy is this? I'm thinking about doing a desk like this but it needs to support 2 large monitors on arms and 2 laptops. 65in x 25 butcher block top.
@darinhodges1863 ай бұрын
Thank you!
@bestfriendjules3 ай бұрын
It's a lot quicker if you just lightly roll the paint on the applicator pad instead of dipping it in the paint pan.
@mariewestley46733 ай бұрын
Where do you put your shampoos and products?
@tooferab19633 ай бұрын
Has anything ever loosened after time? Did it ever become wablly?
@yessicajessica4 ай бұрын
Does the pot filler flow fast enough to still get a hot bath?
@TheHomeownersCookbook4 ай бұрын
Yes!
@tygoulding25474 ай бұрын
Cocking. This word amazes me. I’ve never seen a tube of that in a hardware store. I have seen cauLking. But never cocking.
@nareshsehmar93924 ай бұрын
Thank you
@adamgeraci12305 ай бұрын
Pro tip for this tool , apply with brush either on the wall or directly
@treelo117645 ай бұрын
What is the height from the floor to the top of the butcher block table?
@waneframe5 ай бұрын
Just a suggestion. How about recording while you work on the project? 🤷🏽♂️
@pinkyfloydyfan15 ай бұрын
The better way is to paint in a U shape every time you touch the wall. I'm only painting that way for 10 years now and it always done real good job. Try it! Easy and fast! Let me explain: 1. Dip the Shure-line pad just a little down the tray; 2. Rub the edge of the tray to remove excess (this will produce uniformity to the pad); 3. Do not apply paint directly to the border; 4. Instead, apply further from the border; 5. Slide to the curb and slide 4 feet along it. 6. To remove the pad, slide away from the edge. This results in a U shape, where application and removal is done away from the edge. This prevents staining from application/removal. Have a easy and fast outline painting!
@tiramisufrangelico43566 ай бұрын
Nice quick helpful information - thanks! "Let's jump in and I'll show you how to do it!" - exactly what I need to hear when it's toilet repair time.
@michaelgardenhire70476 ай бұрын
Great job using pot filler!
@ulfpanserbjorn18806 ай бұрын
Price? Pros? Cons? Recommend? Bueno? No bueno?
@stixplayer7 ай бұрын
I actually use my brush to coat the pad. My Father used to have me use it that way back when I was a young teenager in the 1980's...That way he could trust me not to screw up!! I still do it that way.Just a thought.
@TheHomeownersCookbook7 ай бұрын
Good thought! Thanks!
@mannyumana7 ай бұрын
I tried this tool recently and I didn’t like it all. I don’t like how it drags across the wall and can still slip and touch the ceiling. I just taped it everything then used the roller as far as it would go in the corner and then did the small edge with a brush.
@LaJessChelle7 ай бұрын
The pot-filler idea was seriously brilliant!
@therealSIRBOOM7 ай бұрын
Except that it'd take so long to fill that big tub that water would cool before you got in. There's a reason tub spouts are about 2 gpm.
@fin31257 ай бұрын
For me the number one thing is to keep it off the wheels. I do everything like you do except I put more paint on it.
@usaidgill7 ай бұрын
Looks like it still leavees a little gap between the edger and the wall though. How do you get around that?
@user-mr9vn6ep8r8 ай бұрын
How much shur line paint edger
@peterstanghellini3938 ай бұрын
thanks
@mountainshire9 ай бұрын
Should the walls be painted before laying the flooring?
@TheHomeownersCookbook8 ай бұрын
I recommend that! That way you don’t need to cover the flooring when you paint!
@user-mv8eq5sh3r9 ай бұрын
How do you do this when it’s on concrete
@keenokeeno90649 ай бұрын
Just get on with it.
@Reno-pz3kt9 ай бұрын
A lot of painters don't like,I found it to speed up the job in my opinion ...nice video
@steeleher595210 ай бұрын
Bro, you don't need the edger for corners. You need an edger for EDGES, ex: door trim, molding trims....
@jstorres48610 ай бұрын
Does it always leave a small gap?
@butterscotch155410 ай бұрын
thanks so much for sharing this video you just solved a big problem in my house!!!
@peterbarlow891210 ай бұрын
Use your brush to load the pad brushing off the edge. Don’t dip it. You need a brush anyway to get the inside corners. Don’t try to go too far with a load or it will apply too thinly. I use the tilted front edge to swipe down the ridge that tends to squeeze out of the back edge especially if rolling the field is lagging behind.
@user-fq4qk9wz5k10 ай бұрын
If u ain’t got a steady hand and ur using a dark colour to a white ceiling then cutting in can b a nightmare so if this tools solves that problem what’s not to like
@coconutplanet218610 ай бұрын
can you use a quartz top instead of wood?
@hudsondavid906511 ай бұрын
EXTREMELY helpful video! I needed ALL of this info. Thx 4 sharing:)
@rakshithsshetty933711 ай бұрын
Super
@mauricegilliam710211 ай бұрын
Thankyou especially the part for putting seal in first groove. It did it wrong the first time.
@adamkoepke24511 ай бұрын
what brand potfiller did you use?
@phillipsierra207411 ай бұрын
I just finished using this tool and it works. Pretty much take your time. It definitely lets you skip prepping. I washed it after use to save it for the next home project.
@faizfauzichan11 ай бұрын
Can i follow all the materials with 200cm x 60cm table??
@Ecdtheow8211 ай бұрын
So the obvious line where it doesn’t reach the actual edge of the wall, I’m guessing you went back in and used a brush to fix that.