Hey man! How can this kit only be 1000 $ some kits are like 4k
@house-ofhoon4 сағат бұрын
G'day! It's made to be an affordable yet, quality product 👍
@tommycampers789118 күн бұрын
@K_Shea20 күн бұрын
Perhaps a softer temper aluminum Range generally 0-7 with 0 being the softer.
@house-ofhoon15 күн бұрын
That would likely have helped!
@K_Shea15 күн бұрын
@@house-ofhoon 0 is very soft but will age harden some on it's own, it may even work harden from the press, not really sure, it's not readably available in small quantities. You can easily anneal (soften) aluminum with heat, no doubt lots of KZbin videos on it.
@alschannel971626 күн бұрын
recently turboed my 1HZ, used that mamba adapter and very happy with it but did have the same issue as you where i needed to modify my new exhaust to suit the slight angle difference.
@house-ofhoon26 күн бұрын
Great to hear it worked out mate!
@andyduncan9442Ай бұрын
Thanak for the video. I did mine today. Mostly ok but a bit of water has clearly been in there. How has yours been since swapping to generic orings? Easy enough to move?
@house-ofhoon26 күн бұрын
It's been fine so far mate 👍 I honestly can't tell any difference in how hard/easy it is to turn vs standard 😊
@CampTlangramАй бұрын
How much the cv. jnt assy cost?
@mm-oh4oeАй бұрын
I recently bought a new fan clutch, as the old one was 30 years old and the Ute was starting to over heat. I thought it deserved one after all that time. It seems to have done the trick, about $100 Aus. On e-Bay. Thanks for the vid.!
@house-ofhoonАй бұрын
That's great news it helped mate!
@mangomcpoo475Ай бұрын
That code doesn't apply to bolt on 12h-t turbos from Mamba :/
@house-ofhoonАй бұрын
It does work mate. Type "HOHXMA" into the referral code, not the promo code 👍
@mangomcpoo475Ай бұрын
@@house-ofhoon $80! cheers Man
@house-ofhoonАй бұрын
No dramas 😁
@jamiegreenwood7996Ай бұрын
hope the 1hz holds together after turbo install ...many have died after awhile ....I'm sticking with n/a 1hz in my 80
@house-ofhoonАй бұрын
It's usually a bad tune that kills them
@mangomcpoo475Ай бұрын
@@house-ofhoon I can't believe you guys had the sump off for that drain and didn't replace the big end bearings (1HZ/1HD issue)
@house-ofhoonАй бұрын
That's because we replaced the big end bearings around 12 months earlier 👍
@jamiegreenwood7996Ай бұрын
@@house-ofhoon not necessary a bad tune these motors are just not designed for turbos full stop they don't have the proper pistons or connecting rods as i say lots and lots have shit them selfs
@JamesFunnell-rs1pb2 ай бұрын
Hi im in WA and would like you to 3D print something for my GU patrol,how do I contact you.
@reallyskeptical2 ай бұрын
Do you have video on how to adjust tighten wheel hub.
@house-ofhoon2 ай бұрын
Unfortunately, I don't mate
@reallyskeptical2 ай бұрын
@house-ofhoon thanks for replying tho appreciate it. Good content, mate
@house-ofhoon2 ай бұрын
Cheers mate 🤙
@troyphillips7192 ай бұрын
Are the diy kits for sale yet?
@house-ofhoon2 ай бұрын
They sure are 👍 Sent me a PM on one of my socials 👍
@brockcolvin9682 ай бұрын
Where did you get the T pieces from
@redhaze80802 ай бұрын
What is the crashing my Excel song?
@house-ofhoon2 ай бұрын
It's my own song mate 🙂
@IJ-E362 ай бұрын
LoL @ the Snack Net!
@house-ofhoon2 ай бұрын
The most important thing in the car!
@IJ-E362 ай бұрын
@@house-ofhoon and all this time I've used an Esky in the tow car!
@house-ofhoon2 ай бұрын
Gotta keep up with the times mate!
@IJ-E362 ай бұрын
@@house-ofhoon House of Hoon schools in session!
@mathewross33982 ай бұрын
also a flocked dash and steering boss extender ... nice car
@house-ofhoon2 ай бұрын
Gotta love a flocked dash 👌
@mathewross33982 ай бұрын
@@house-ofhoon my son is 16 and gets car parts for xmas etc this year was a flock kit in red ! bday was red and white paint to paint his pulsar rally car
@house-ofhoon2 ай бұрын
That's awesome mate!
@mathewross33982 ай бұрын
was that fuel tank leaking?
@house-ofhoon2 ай бұрын
Hayden washed the car prior to filming, so it was just water 👍
@jamesgill40352 ай бұрын
Thanks Bman. Loved the funnys at the end. 😂
@house-ofhoon2 ай бұрын
Glad to hear you enjoyed it 😊
@hdmotorsport67602 ай бұрын
Who's that handsome bearded fellow? I bet he's a great driver and never crashes...
@house-ofhoon2 ай бұрын
Never EVER crashes!
@MRMOPARMAN04262 ай бұрын
Juan
@house-ofhoon2 ай бұрын
👏👏👏
@thatsgangsta24502 ай бұрын
Either the drivers side hub is different with the clutch assembly snap ring or a previous owner installed it wrong because my was extremely difficult to get out
@house-ofhoon2 ай бұрын
Could even be manufacturing tolerances
@sethahul25932 ай бұрын
best tuner
@house-ofhoon2 ай бұрын
💯
@KonSkolarikis3 ай бұрын
Hi mate, how have you found using this turbo? Had any issues? Cheers
@HardstylePete3 ай бұрын
What metal did you use for this strut brace?
@house-ofhoon3 ай бұрын
I use Mild Steel for this one. I have made stainless steel strut braces for the S15 though
@IJ-E363 ай бұрын
Fair percentage increase there, has to be way better to drive now!
@house-ofhoon3 ай бұрын
Yea it's sooooo much better to drive now! Like a different vehicle!
@jpstrim3 ай бұрын
Great vid once again, excellent gains on the 80, sounded great the other day!
@house-ofhoon3 ай бұрын
Thanks mate! It's definitely made it much better to drive 😁
@VaughanMunro-js4nr3 ай бұрын
Another Great Video from the House of Hoon. Skilled Tuning on a Dyno makes a big difference. I would like to see the build-up of the Toyota 80 series. The conversion to a single cab, how the rear wall was done, and the Chassis modifications.
@house-ofhoon3 ай бұрын
Thanks mate! I may do a general walkthrough video of everything and then a more detailed video of just the chop and chassis extension 😊
@jamesgill40353 ай бұрын
Walk through would be great thanks. Must feel amazing to cruz in now.😎
@house-ofhoon3 ай бұрын
One walkthrough coming right up good sir! Yes, it's so much better to cruise in now! 😀
@andrewt39523 ай бұрын
Awesome love it when a vid drops from u mate. Any patrol content coming? 👍🎯🍻🇦🇺
@house-ofhoon3 ай бұрын
Thanks for sticking around mate! Appreciate it 😁 I've got some patrol videos in the pipeline. However, there will be a few videos of other things before the patrol
@josephmacey85124 ай бұрын
well done. I hope I see more from your channel , and would you be thinking about building an air box for a GU, with plans I would like to make one for mine.
@house-ofhoon3 ай бұрын
Cheers mate! Plenty more to come! I've already made an airbox for my patrol (not filmed unfortunately), so I probably won't be doing another one
@mJlReplicanT0014 ай бұрын
Goddam - Steady hand on the plasma 👌🏼
@house-ofhoon4 ай бұрын
Haha! Thanks mate!
@joel97934 ай бұрын
Are the cozza cv still holding up mate
@house-ofhoon4 ай бұрын
Yea they are. Have not had any issues with them since putting them in ☺️
@larryvenn24344 ай бұрын
I have crosscountry top mount , Will this modified manifold still fit ?
@house-ofhoon4 ай бұрын
I'm not sure to be honest because I don't have a cross country intercooler
@youngadventuresaustralia9524 ай бұрын
Where does the diesel heater inlet / exhaust run?
@house-ofhoon4 ай бұрын
The inlet is under the camper and the exhaust is out the side wall
@KP-ty9yl4 ай бұрын
I know exactly what this is; we call it "flowering." You need to support the outer edge of the blank with downward pressure or it will take the path of least resistance and begin to wrinkle. In extreme cases these wrinkles can cause blowouts. A more substantial lubricant will also help.
@house-ofhoon4 ай бұрын
Thanks for your help mate!
@TwoNuggs4 ай бұрын
Hey mate, I'm in Victoria too and need some assistance designing and fabricating a bull bar for my suv. It's going to be a unique build, won't see anything else like it and would love to get you on board with the journey!
@house-ofhoon4 ай бұрын
Hey mate. Sounds interesting! Send me an email or pm on insta or FB 👍
@TwoNuggs4 ай бұрын
@@house-ofhoon I sent a fb message on my partners fb as I don’t have it anymore haha
@shaun20494 ай бұрын
Thanks mate going to do mine
@house-ofhoon4 ай бұрын
Awesome mate! 😀
@chrisfisher39005 ай бұрын
Nice work
@house-ofhoon5 ай бұрын
Cheers Chris!
@garywinkworth33805 ай бұрын
great job mate. well done thanks for shareing
@house-ofhoon5 ай бұрын
Cheers mate! Thanks for watching 😁
@lukeirmer53165 ай бұрын
We have an older unit and it's a pile of crap. It can't duplicate bends and is extremely inconsistent. Its too bad because it could be a nice bender
@house-ofhoon5 ай бұрын
We've had inconsistent bending issues as well. It really is a shame. What model is your bender mate?
@lukeirmer53165 ай бұрын
@@house-ofhoon its the RDB250
@TheVirgilc5 ай бұрын
Hey mate! Where are you located in Victoria? We just pick up our tommy camper here in Ballarat, and heading back to south Autralia tomorrow, I'm just wondering if can purchase one of your Tommy Camper fly screen for S4-X model
@house-ofhoon5 ай бұрын
G'day. I've just replied to your email. Cheers 👍
@asicit67895 ай бұрын
Loose sloppy canvas by the looks of it. Disappointing as I was looking at these. Stitching also looks bloody average. Apart from that the platform as a whole is spot on!
@house-ofhoon5 ай бұрын
No issues experienced with the canvas so far ☺️
@davidnazario66465 ай бұрын
Nice 👍
@house-ofhoon5 ай бұрын
Thanks mate! 😁
@johnpulei79165 ай бұрын
Is there a build video
@house-ofhoon5 ай бұрын
Not of the cruiser build unfortunately. Just the turbo/intercooler
@br06sj085 ай бұрын
Interested to know whether this car was running hot, particularly towing?
@house-ofhoon5 ай бұрын
It only ran hot when the radiator was full of mud 🤣🤣🤣
@wittywitt15595 ай бұрын
This video really helps, because ive went and bought one for myself
@house-ofhoon5 ай бұрын
That's awesome mate! When did you buy it?
@wittywitt15595 ай бұрын
@@house-ofhoon like a week ago
@house-ofhoon5 ай бұрын
Sweet! Can I ask if you used my link/discount code?
@wittywitt15595 ай бұрын
@@house-ofhoonsorry I saw this video after I purchased
@house-ofhoon5 ай бұрын
No dramas mate 🤙
@pedowan825 ай бұрын
Nice work. I have a 16G waiting for me to install. Any idea what it’s done to your fuel economy? Stumbled onto this video randomly but KZbin’s algorithm did good. I’m in Macedon Ranges.
@house-ofhoon5 ай бұрын
Cheers mate! Finally the KZbin algorithm is working! Lol It's improved my economy. I use to get around 16-16.5L/100. I now get around 14-14.5L/100
@TheDbcdino5 ай бұрын
awesome video mate
@house-ofhoon5 ай бұрын
Cheers mate!
@andrewcheshire2445 ай бұрын
Nice work! ugh I'm dreaming of a sheet metal bender/press like that.