Performance Automatic

Пікірлер

@j.m.bonilla1053 6 күн бұрын

do you have a kit to fit a modern automatic transmission to my 1951 Cadillac with a 331CID engine?

@JeremySRRT 14 күн бұрын

I have a’17 f150. Had shifting problems and changed the lead frame. It worked perfect for about a month and now it’s acting up again. I really don’t want to do this again. It sucked.

@oz4mee 20 күн бұрын

I am curious the updated lead frame has a hole in the body center which the old one doesn't. what is that hole for? HAve they relocated the filter or dos it do another purpose?

@dark7068 Ай бұрын

what is the shifter paddle up/down connector part number and cost.

@22HARAGAN 2 ай бұрын

Please sent me a link for that part

@pete1003 4 ай бұрын

I'm in desperate need of an aode 92 to 95 valve body or separator plate. It is white plug with soft wire harness

@kernblock323 4 ай бұрын

will it work with one of ur 470w transmission

@paulbergad5953 4 ай бұрын

Maybe you could make the video a little blurrier? I could almost see what you were doing.

@Captgreatvalue 4 ай бұрын

I have a 1992 ranger that has black 20 tooth gear I found a weird 16 tooth gear on eBay and I ordered it I’m gonna try it my speedo cable is very slow turning while driving let me know what you think thanks for your content also does less teeth mean spin faster we need content on this

@TheBloxDev 6 ай бұрын

Doesn’t work with 8 speed?

@Diondo26 7 ай бұрын

my PA Valvebody needed some extra work to work good... 1-2 shifts at high rpm was too slow ..got a kit from TransGo and fixed that ..also a good idea is to change the weight in the Govorner Valve ...at full Throttle trans shifts now at 5750 rpm no shuffle nothing ... all shifts now are nice firm and quick ..

@ZteveW 7 ай бұрын

What’s the torque and tightening sequence for the lead frame to valve body bolts, valve body to trans bolts and the transmission pan bolts? I have a 2012 F-150 3.5L

@AmericanSimracing 7 ай бұрын

does this think just end up failing...Not ONE person,business or media entity has done a follow up and the only comment i have found was from a nice woman who said it has been nothing but a headache with missesd shifts and gear slips

@ianandrew7010 9 ай бұрын

Will this fit a TH400 auto gearbox please 🙏

@ds4426 9 ай бұрын

Can you sell me the Valve body and leadframe assembly together without TCM? Please let me know, thank you

@ds4426 9 ай бұрын

Is the TCM in the Lead Frame or is the TCM built into the Valve Body? My 2013 Ford F150 is an older version and the dealer is telling me my Valve Body and leadframe does not have the TCM? Where do you find the TCM?

@mattrodgers4878 9 ай бұрын

Fords “official” motto use to be “ Quality is job one!” Their unwritten but constant motto “Let’s change things!!!”

@williambrant3214 10 ай бұрын

Im trying to go the other way coyote to windsor style transmission will this work?

@danielstorts5372 6 ай бұрын

I’m trying to do the exact same thing on a 1980 bronco I’m not having any luck finding out how to do it. I believe it’s a C6 transmission.

@butchperalta8756 10 ай бұрын

Hi,would you kindly help to locate the transmission temperature sensor on my fordwildtrak 2015 2.2 engine. I had it scanned and what comes up says problem with transmission temperature sensor..thank you so much

@jamesmcknight6440 Жыл бұрын

Never use an air tool to start bolts,very easy to strip the threads on aluminum

@yasser.busaleh Жыл бұрын

how much does this thing cost?

@jessecole9954 Жыл бұрын

When I was servicing my c4 transmission, the valve body spring came with. How do I reinstall it? Out of a 74

@kristuma3903 Жыл бұрын

Hello, if I replace the valve body and lead frame do I HAVE TO get the solenoid strategy reprogrammed? I’ve had the learned data cleared and it is shifting smoothly, far better than before I replaced it.

@jrbarden80 Ай бұрын

Did you ever get an answer to this question? I am looking to replace my valve body assembly as well. Did you ever get it programmed?

@randalllyons8467 Жыл бұрын

I would love to put a better engine in my f150 and trash the 5.4 triton 3 valve.

@howlinhog Жыл бұрын

Do you set/check clutch pack clearances before or after you soak them?

@7bntashagm831 Жыл бұрын

Trans talk huh

@phillipdale6765 Жыл бұрын

Thank you

@kennethabrazee3540 Жыл бұрын

Appreciate the video thanks

@georgehouck4300 Жыл бұрын

I just had my C4 rebuilt and it will not engage in any gear I did have a shift kit put in it and after watching your video a few times and I pulled the pan on my transmission that bolt & nut you mention that needs to be installed if there is no provision for a threaded bolt in the transmission case is missing, would that missing bolt & nut prevent my transmission from shifting into any gear? I'm thinking if it does it's because it's letting fluid pressure escape the valve body and not let the transmission shift at all? I would deeply appreciate a reply thank you

@llanos3603 Жыл бұрын

5.39" why you use the steel check wall "the small iron ball" it have a function?

@preacher031163 Жыл бұрын

You are absolutely wrong on the drive gear on fords,my 89 f150 i just changed mine,took all of 20 minutes...and ford has 5 speedometer gears ti choose from with each gear having about a mph diff

@PhearaXT Жыл бұрын

Nice!

@lemons3738 Жыл бұрын

is there an adapter available anywhere to adapt a 6r80 to a 7.3 power stroke? I have a 6 speed manual currently but I love the 6r80's and 10r80's in the vans I drive for work. I don't tow much and I think a built a 6r80 would be great behind my 7.3. If someone ever makes a standalone controller for the 10r80 that would be even better.

@jesse75 Жыл бұрын

Stupid kit. Has two gaskets for valve body but the gaskets don't have an A or B on them.

@peterpowers4851 Жыл бұрын

Thank you for this video, very helpful

@coryswinerton3296 Жыл бұрын

My 6R80 with only 1600 miles on it after a rebuild, flared 300rpm from a 5-6 gear shift. Now, when trying to move forward, it seems like 90% of the line pressure isn't allowing full engagement in D, and the RPM just climbs with very little forward movement. Reverse engages perfectly fine. The car was driving perfect for the first 7 minutes, and then this came out of nowhere. I believe its a solenoid/valve body issue. No codes came up. I am swapping the valve body, bridge and tube seals today.

@2311LJ 5 ай бұрын

I'm having these issues. Did that work for you?

@texasoweee 9 күн бұрын

Any updates

@351clevelandmodifiedmotor4 Жыл бұрын

4:13 fuck doing that when you under the car on a lawn right??? and ya never done this before right??

@351clevelandmodifiedmotor4 Жыл бұрын

its like when we are born we are expected to know what a servo is and all about them , all i know is my servo is leaking fluid onto the exhaust and smoking really bad for a while, im sick of that ,

@jamesakerman265 Жыл бұрын

So what do 1000s of people do when ford has no idea when the molded lead frame isn't available? If you know where one is please share

@Jorge-zt3zd Жыл бұрын

Where’s the range sensor located?

@gregwarner9624 Жыл бұрын

According to this video, it was right there on the lead frame.

@emma_freerider Жыл бұрын

Hello Performance automatic, is it normal that the overdrive is always getting enagaged so quickly? I bought this valve body for my thunderbird super coupe but when it is in Drive the overdrive gets engaged very soon Im from mexico sorry if im miss writing

@colinl9018 2 жыл бұрын

Just recently changed one out in my 2012 Territory (Aust). The Neutral Switch section wore out. Where the slide travels over magnets to select park, drive etc. It totally confused the computer and refused to start. (thought it was in gear) The vehicle has travelled 225,000 kilometres (135 thousand miles i think) in 10 years. I wasn't impressed with this failure and copped a $2000 bill to get fixed, albeit, the workshop used the latest whizz bang improved parts flown in from The US. This is a diesel vehicle so expecting many more miles from it now.

@full---movie 2 жыл бұрын

Would this kit work on a 2012 Ford Raptor? (For kit #PA68506)

@gemynyxx 2 жыл бұрын

On the 30 series vs 40 series gear: does the same speedometer cable fits?

@DavidMartinez-ig7yo 2 жыл бұрын

Do you guys also make an adapter kit to go from Ford 351W engine to Ford 4R100 transmission.

@johnwargo2590 2 жыл бұрын

"Separater plate comes in two styles"....and CUT! You failed to give us the critical piece of information and also why this will not work on a 1993...or will it? How about finishing the video?

@garybright4402 2 жыл бұрын

How much easy kit for a small block 351 Windsor

@scooter1391 9 ай бұрын

check this one out 6R80/TR3650/T45 Adapter Install 302/351W

@000MACK000 2 жыл бұрын

I really don't like the push button choices they're all ugly I need something more classic looking like the original push button shifters from the 50s I would like to install this in my 1970 motorhome.

@jayisfedup6896 2 жыл бұрын

Can any1 tell me whats needed to get a 6r80 in a 05 f150 4x4? My old lady has a 12 expedition with the same engine(5.4 3v) same as I do in my 05 f150. But I have the 4r75e. I really like to have those extra gears an also the ratio!! Hers has great pep an better mpg's. So any1 help or point me in a direction?? Appreciate your time if so

@Scott9181970 Жыл бұрын

Transmission and torque converter should bolt up just fine, but you'll need a transmission controller. If you use a 2011+ 6R80 from a 5.0L-powered truck, you should be able to use the "Quick 6" controller, but I'm not sure how well the stock ECM will play with it

@flowingwithmilkandhoney8188 Ай бұрын

@@Scott9181970is it the same for the 4.6?

@AO-bm1pi 2 жыл бұрын

With a new valve body and with the new lead frame from the dealer will it need to be programmed when installed?thank you

@JamesElterman 9 ай бұрын

Came here looking for the same answer. Instructions included with the new valve body say yes.

@AO-bm1pi 9 ай бұрын

@JamesElterman You can get instructions on KZbin step by step. Luckily, I have a transmission guy who handles it for me . Look up the Ford Loco guy he really good with part list and good breakdown

@JamesElterman 9 ай бұрын

@@AO-bm1pi thanks. I just found instructions on how to update the programming using Forscan.

@ronc4146 3 ай бұрын

@@JamesElterman could you perhaps post a link to those instructions? Thx.

@mudcud 2 жыл бұрын

Where do I get the TV shaft I snapped the nut off of mine and I need to replace it where do you find it

Ең жақсы KZbin

Пікірлер