I have a corsa extreme if I put this on my car and put it quiet mode for start ups or when I’m passing a cop is it quiet still I live in cali so I’m sure you understand lol
@dp300c4 күн бұрын
Damn! These headers are gonna sound mental paired with my Borla atak catback 🤣🤣🤣
@dwaynebennett23225 күн бұрын
Does your truck have the snow plow prep package with the heavier springs in front?
@jasonsteffek92658 күн бұрын
I've had the same hood on my 3rd gen dually for years. It holds up very well. I paired it with Fiberwerx fenders. Was nice to see the process.
@aaronschinlaub970410 күн бұрын
Anybody watching this video?If you are going to do balancing beats the only thing i've learned is you gotta go 1 oz for every 13 pounds. Everything I've watched. The worst part is nobody puts enough. And it will not hurt if you get a little bit extra.
@tunaboost480111 күн бұрын
It’s a lot easier if you just buy bigger springs. Bought my whole kit from Thuren (2” front coils, overland shocks and adjustable track bar)
@miguelgodinez228613 күн бұрын
Just my cents in here, wide wheels like this and even bigger than oem will vibrated and that’s not Becouse the balance beads. I’m sure this is your first wide wheels that you ever owned.
@wesmckenzie83313 күн бұрын
Awesome truck! Awesome motor! Sounds just like the mustang
@EvanDowning_1314 күн бұрын
Is it louder with the stack?
@AaronJacobo-pt8jd14 күн бұрын
Respectufully, you sound like a tire shop owner... Please tell if your tires had weights previously, and if so, what type of weights, etc. Please note that before using tire balancing beads you should remove completely the fixed weights. If the tires has no weights previously, (before applying balancing beads) please clarify that. NO matter how big your tires are, MAYBE your specific issue to your case is the aspect ratio of them.... too way width in relation to its profile. ....¿Did you put the correct amount for the tire size/weight? Etc. Thanks!
@paulwerkheiser870516 күн бұрын
So the clutch issue with these is only for people running rear polymer sprocket guards and it it has to do with shock feedback being sent when hit hard on rocks. If your riding live trails or tracks no issues. If riding xc go to breath for you fix. Don't listen to all the forums you see online and people talking about it the majority of those people are just repeating what other people have said. If the issue is that crazy Yamaha would have fixed the issue on all their machines and recalled it if you call Yamaha they'll tell you.
@Division_Agent_20 күн бұрын
People. Y'all need to understand that the microphone and KZbin will quiet down loud sounds & make quiet sounds louder. If you think this sounds loud, it's really louder then all of the angels in heaven singing in real life.
@1982field21 күн бұрын
Did you add the right amount for your tire size ?
@darrenwmills813921 күн бұрын
Was it any louder after delete? Cab noise, idle?
@chrisstooke872022 күн бұрын
Am not shure here,but not having your tip on the slip on...why is that. I feel like id woud affect somthing some were. Just got a 2024,just looking around for good tips on what to look for
@josephsteinhilber72523 күн бұрын
Just did my leveling kit while watching this video. Definitely the easiest way to do it
@franciscounger126424 күн бұрын
Very helpful job went easy after watching this video
@JacksonOffroad2524 күн бұрын
When are you bringing back the yfz content?
@paultrinidad240124 күн бұрын
Has you check engine light ever come back on??
@user-wr1hh9tn2y25 күн бұрын
can you install these headers without a tune ? or the car will pull codes ?
@Cam3.719 күн бұрын
Would not recommend, unless you plan to tune within weeks after
@Alexram0625 күн бұрын
Who’s tuning do you run
@mikewolfskhal878225 күн бұрын
4 auto doesn’t mean you are driving all 4. the only time it will kick on all four is when it detects traction loss. Otherwise you’re basically in 2wd
@nastysoda921226 күн бұрын
that orange frame looks so cool
@BeleagueredCastle-hk2vv26 күн бұрын
In aviation mechanical problems have greater consequences which creates a different lens to look through. In early development of the OH-58D psychotic version of a Bell Jet Ranger, tail boom cracks were discovered just forward of the tail rotor due to vibrations outside design tolerances. The higher RPM of the tail rotor required to counteract the upgraded 4-blade soft-in-plane rotor system created those vibrations and cracks. The Solution: install a certain plate over the area with proper and sufficient riveting. The Result: Vibrations propagated up the tail boom to cause cracks in the oil cooler deck. The moral of the story is doing this non-standard task is nothing more than trading one point of failure for another.
@williamfeldner935626 күн бұрын
I do not want to buy that used truck!
@paultrinidad240128 күн бұрын
Tbh I like the x pipe better
@thehydroproject5325Ай бұрын
Will this kit work for a 21? The only one I’m seeing is the “tremor” for the 20-22’s. Just curious if anyone would know, thanks
@RecklessOffsetsАй бұрын
Can't guarantee it but I'd assume they would work. They only did a front end refresh on the 20-22 trucks for the most part. Axles should be the same.
@Ctrnr1995Ай бұрын
Any reason why my upper control arm is touching the shock spring?
@RecklessOffsetsАй бұрын
The only time it'll do that is if you have the truck jacked up in the air.. it'll barely touch. If the full weight of the truck is on it and it's touching then you have to big of a leveling kit most likely.
@MyTubeUser321Ай бұрын
For 14 wide wheels you need at least 16 ounces of beads
@williamfeldner9356Ай бұрын
Put it in tow/ haul or sport mode and it shuts off cylinder deactivation
@danielsaucier7864Ай бұрын
Does yours bog at all just got a 2024 today and bogs a little low rpm
@douchedidit9222Ай бұрын
What year was the raptor?? Plzz let me kno
@williamklaproth85Ай бұрын
beads are fantastic for people that actually go off road and get mud packed wheels.
@fnafplayer6447Ай бұрын
That thing sounds PISSED I love it! Ford definitely killed it woth the 6.0
@jeffjackson8686Ай бұрын
Great video, this is the easier way for sure. Question? Is it possible to get a spring compressor on to the spring, if so would that eliminate removing control arm bolts?
@jamesperlin6457Ай бұрын
My headers will be here this week I’m keeping stock active as well. This video got me so hyped Good stuff brother
@jeffersonvasquez8173Ай бұрын
How can you make turn so smooth
@xGR1MxREAPERxАй бұрын
They both sound great. Not much of a difference at all. On these chassis mustangs a fbo car makes 5-6 more rwhp with an x pipe so mine as well keep the x pipe as the sound difference is almost unnoticeable
@xGR1MxREAPERxАй бұрын
You need caster camber plates for front bud. Mustangs have 0 adjustability stock for camber.. spacers are crap don’t ever use spacers.. your wheels are sucked in on the tint cause your probably a -2.2 or more negative camber. Get caster camber plates and set it to a nice -.8 or -1.0. As far as the rear your rear subframe is square. While you did springs you should do the centering sleeves and stop to hop kit and it centers the rear subframe.
@xGR1MxREAPERxАй бұрын
Your wife/gf has the same face as all our gf’s do lol.. they are not impressed 😂😂😂😂
@Jridesbikes24 күн бұрын
😂
@DakotaThePawgHunter7 күн бұрын
Must have found the wrong one
@S5MotivАй бұрын
Oh my 😮
@TroyRossbergАй бұрын
What brand of X pipe did you have?
@RecklessOffsetsАй бұрын
Sr
@TurnThemWheelsАй бұрын
Those are MTS not MT
@RymccАй бұрын
Do you have headers?
@johnnyguzman8192Ай бұрын
My respect to that woman wow the dedicating she has given to that hood , awesome job , im looking at the same hood for my 2023 ram , how much would you charge for an awesome paint job like that ?
@AKSchlahtOАй бұрын
I wanna try them tunes. Don't want to get on tik Tok tho 😂
@JakeScott-ke3sh28 күн бұрын
Have you found a way to contact the guy?
@JR-us1neАй бұрын
I have the same set up with catless headers. The stock active mufflers is what makes the tin can sound. Loved the sound before the headers but cant stand it now. Going with a borla exhaust soon
@theodorecarbajal2975Ай бұрын
Sounds like a diesel sorta, gotta love the ecoboost.
@RX7201AviationАй бұрын
I’m currently learning about global warming at school lol