8:04 Only thing I'd do different would be to cut the Solenoid connector off the old Carburetor and splice it onto the new carb's wiring with heat-shrink instead of cutting & replacing the connector from the mower's wiring to make the splice. Both ways work. I just like all my OEM electrical connectors to remain in place. Nice Video.🤑
@seabrook197610 күн бұрын
Thank you so much! Your video unlike most others shows this cool trick that worked quite well for me. Thank you for saving me lots of frustration with my spool that wouldn’t work.
@fromcarstocomputers726110 күн бұрын
You're welcome I am glad the video helped.
@MariaGonzalez-ei1pv18 күн бұрын
Great video Help!!!! my tilt is stiff now ,it use to be smooth .now is a lil stiff to go up and down only....
@fromcarstocomputers726118 күн бұрын
Grease or sewing machine oil might fix it just be careful no to get it onto the electrical contacts
@Notpublished20 күн бұрын
Thank you, you saved the day!
@fromcarstocomputers726119 күн бұрын
You're welcome, glad the video helped
@kennethsmith903323 күн бұрын
I have a 26cc is there supposed to be a spring in the bumper head
@21dolphin12324 күн бұрын
good lord put some rubber gloves on
@reed649025 күн бұрын
After my husband had his meltdown over his chair and left the house, I oiled the moving parts and it’s working fine. 😊Thank you for your video.
@fromcarstocomputers726125 күн бұрын
Nice.
@timothyoreilly568827 күн бұрын
On my electric chair the foot rest get bound up on the right side about 3/4 of the way down
@patrickdabs29 күн бұрын
You sir, are an absolute life saver. Replaced a brand new line and it still leaked, tried this and it’s dry as a bone now.
@fromcarstocomputers726129 күн бұрын
Thanks. I am glad it helped
@dgriffin6074Ай бұрын
Of limited value because camera locations are inadequate.
@fromcarstocomputers7261Ай бұрын
This is true
@randyknight6734Ай бұрын
Great job!! Thanks for the video. Where did you find the parts to rebuild the unit. I’m having trouble locating them? Do you have the part or parts numbers
@fromcarstocomputers7261Ай бұрын
I used the model number ( it is under the hood ) and searched around on ebay and other sites but I did find that in this case I could just get the parts from Troybult at the same price ( give or take a little ) and that way I know I have the proper part. here is the site www.troybilt.com/en_US/service-and-parts
@randyknight6734Ай бұрын
@@fromcarstocomputers7261 I called them and they told me they didn’t sell the parts . She must have been a rookie?
@randyknight6734Ай бұрын
I did find them though . Thanks for the info!!!
@AB-ye7bwАй бұрын
Excellent! Exactly what I was looking for. And , short and to the point. 👍👍
@fromcarstocomputers7261Ай бұрын
Thanks. But take note that the video is flipped so it looks like I turn the screwdriver the wrong way
@philliphall5198Ай бұрын
Great job of explaining it and we normal folk enjoyed it 😊
@fromcarstocomputers7261Ай бұрын
Thanks. I am glad you liked it.
@philliphall5198Ай бұрын
Best overall trans ever made and the cheapest to fix Back in the best days in America history, like the vs units also Folks you think the new crap is great tell you see the cost 💲 to fix or replace it 😢😢😢
@aleks_jonesАй бұрын
you were especially right about the part where my head burst into flames.... gonna try this tomorrow, thanks boss.
@fromcarstocomputers7261Ай бұрын
Maybe it will be a good day.......... but sometimes good days are far apart. either way try to make the best of them
@russprothero3903Ай бұрын
Good video. But the camera placement wasn't ideal. A tripod with a gooseneck would allow for better placement. Great information though. I have a problem on my breaks where the rotor isn't spinning. I was hoping the teeth in the rotor stripped. But no suck luck. The tractor runs great forward and reverse. Will climb up a barn door if I wanted.
@fromcarstocomputers7261Ай бұрын
Yes, the breaking system on these are not the best. And yes I know my angels are not the best but I have been just using a Panasonic lumix DMC-Zs19 camera because it's what I have. ( and not it needs a new battery ) but I might purchase a couple of GH4 or a couple of go-pro 9 cameras or something along those lines in the future
@benwayne5208Ай бұрын
Thank you!!!
@fromcarstocomputers7261Ай бұрын
You're welcome
@duanestukins3923Ай бұрын
My lazy boy pops when I’m rocking?
@fromcarstocomputers7261Ай бұрын
Look at the feet of it and make sure that they are not pulling apart. You can re-glue it or use a 1 1/2 to 2 inch long wood screw ( Sheetrock screw ) after you drill out for it and or course there are other things that can course the pop as well, but this is one that gets overlooked
@PapaMavАй бұрын
Thank you.
@fromcarstocomputers7261Ай бұрын
You're welcome
@laurafair2730Ай бұрын
If I forgot to put that nut on … am I screwed? Lol
@TedP007Ай бұрын
Great video You're lucky you can buy the individual parts. Here in Canada they don't list them. Would you be so kind as to provide links to the parts you bought & where to get them.
@fromcarstocomputers7261Ай бұрын
I searched around on ebay and other sites but I did find that in this case I could just get the parts from Troybult at the same price ( give of take a little ) and that way I know I have the proper part. you can find your mower model number under the hood cover or under the seat if not under the hood. here is the site www.troybilt.com/en_US/service-and-parts
@jimkurk5575Ай бұрын
hello, the spring/wire at 2:05 is broke on mine, got any idea where i can get one or how long is it to make my own, thanks
@fromcarstocomputers7261Ай бұрын
This might help upholsteryresource.com/book/export/html/169
@outeroomАй бұрын
Thank you! I have this video bookmarked in favorites and pull it up every spring. It saves me lots of frustration!
@fromcarstocomputers7261Ай бұрын
You're welcome. I am glad the video helps
@laurafair4361Ай бұрын
thank you. thank you I couldnt figure out how to replace the string
@fromcarstocomputers7261Ай бұрын
You're welcome
@laurafair4361Ай бұрын
how do we add more string? I am used to the kind where I just put in another cartridge but I cant figure out how to open up this one. thanks
@fromcarstocomputers7261Ай бұрын
I see by your second message that you found the re-string video before I could reply.
@Godisknockingx2 ай бұрын
Video was much appreciated. Thank you sir.
@fromcarstocomputers72612 ай бұрын
You're welcome, I am glad it helped
@Godisknockingx2 ай бұрын
Extremely good information. For me this is very useful information.
@vids4fun2 ай бұрын
I am having trouble removing the plastic filler plug
@fromcarstocomputers72612 ай бұрын
You could try Pliers but you might break the plug and then that would be a real mess. Yes I think they should have used a metal plug
@vids4fun2 ай бұрын
@@fromcarstocomputers7261 that's what I'm afraid of, barking the plug with pliers, sprayed some wd40 today to see if get easier to remove, e see everybody removing by hand
@jeffreys.harris34332 ай бұрын
Great video I've got one that's locked like yours I bought it for $25
@pwu81942 ай бұрын
What I really need is a solution when I am stranded in the middle of nowhere where there is no cell phone signal, no one else around, and my car battery is dead.
@fromcarstocomputers72612 ай бұрын
Schumacher SJ1583
@savannahtropix6152 ай бұрын
GOOD VIDEO 🎉/I WISH U CUD SHOW HOW TO PUT THE STRING SPOOL HEAD ONTO THE TRIMMER TOO! 😢
@mikegriego36712 ай бұрын
I have a leaking front banjo fitting on my XJ, gotta try this.
@JanetKelley-sl9sr2 ай бұрын
You hand was in the way
@scottolson52852 ай бұрын
Just broke the belt on Grampas old sander you saved the day
@cathystraka95312 ай бұрын
good job
@fromcarstocomputers72612 ай бұрын
Thanks
@rebelyankeesshow56862 ай бұрын
Just installed a new carb on my lt 1042. Wont start, not getting fuel. Put a new pump in and lines. Selonoid clicks over, idk im at a lost
@fromcarstocomputers72612 ай бұрын
Make sure it will run at all, give it a shot of "starting fluid and see if it will start" if so then you know you have firing. See it could be getting fuel but not firing and that could be many things, but it could be a bad kill switch like the one under the seat or the blade engage or the neutral gear one if any of these are acting up then it can stop the firing
@rebelyankeesshow56862 ай бұрын
@@fromcarstocomputers7261 after close examination, vacuum hose from the valve cover to the air filter housing is busted and there's a lock washer on the ground wire, wonder
@fromcarstocomputers72612 ай бұрын
@@rebelyankeesshow5686 Looks like you're well on the way to fixing it.
@rebelyankeesshow56862 ай бұрын
@@fromcarstocomputers7261 nope lol replaced the vacuum hose, took the lock washer off the ground still nothing. The choke plate was hitting a jet in the carb. I finally got it loose but its still not moving as it ahould
@fromcarstocomputers72612 ай бұрын
@@rebelyankeesshow5686 You may want to try and return that carb
@jayfoster50782 ай бұрын
Bubbles in coolant bad head gasket?
@fromcarstocomputers72612 ай бұрын
The head gasket was good the system can let out a small amount of bubblse when it is getting a fill up ( from air in the hoses a such )... but this did have a leak in the heater core as well and I changed it out soon after this video was made, so yes the system was not flowing just right because of the leak
@wasteland69612 ай бұрын
It worked thanks bud!
@fromcarstocomputers72612 ай бұрын
You're welcome
@Michael-dx7fe2 ай бұрын
Glad u put your safety hat on 😅
@MarcusRefusius2 ай бұрын
Medium density Fiberboard
@hashimsalim26652 ай бұрын
😃
@grannysweet2 ай бұрын
Thank you !!! ❣️👍😎🌈🐕
@fromcarstocomputers72612 ай бұрын
You're welcome
@elmokito132 ай бұрын
i am going nuts trying to inflate the tires on my jazy select gt..i took off the hub cap..theres a warning. inflate tire before removing wheel. how? i dont see a valve stem?? help please
@fromcarstocomputers72612 ай бұрын
I do not think the model in the video had ( tube tires ) but your valve stem may be on the back of the rim.. but I am sure you looked there
@l0lgamez122 ай бұрын
lol i just did all of this only to remember since my car was in a accident there is no more front bumper so i didnt need it lol but great idea
@fromcarstocomputers72612 ай бұрын
Thanks for the laugh
@FemShepN72 ай бұрын
Does anyone know where i can find that head assembly? I recently inherited this model, but it has no trimmer head, and i can't find it anywhere
@mikemazella11973 ай бұрын
Thanks man. Great idea.
@fromcarstocomputers72612 ай бұрын
You're Welcome
@mindychaddock47173 ай бұрын
Best easiest video on the internet you sir are a genius!!
@fromcarstocomputers72613 ай бұрын
Thanks. I am glad it helped.
@shodancat10003 ай бұрын
i was converting my Thunderbird to Mustang Cobra front brakes and i could not get a good seal between the caliper and brake hose block. your trick did the, er, trick! i just gave them a good wiggle with a crescent wrench and then added just another nudge to the banjo bolt and the leaks finally stopped.
@timbo47073 ай бұрын
I was just in my yard getting ready to start this same job trying to figure out the best way to "jack"the mower up. No B S, I suggested this exact method and my wife called me a redneck and laughed at me. Thanks to you sir, and all the positive comments for helping prove my genius!!😂
@RustyShackleford-zw2gu3 ай бұрын
Use the ratchet to lift the equipment? I AM THE EQUIPMENT
@fromcarstocomputers72613 ай бұрын
I am now weak in my old age...I am thinking about making a few workout videos so I can get this old broke down body back in shape