Not true. These are very hard to install if you have a length of 72". Very disappointed.
@ddgamble2199Күн бұрын
Do you have any that attach to the bottom?
@SelectBlindsКүн бұрын
Our No-Drill headrail uses tension to hold the product in place within the window frame and works best if attached at the top of the window. We do carry Top-Down Bottom-Up shades with the No-Drill headrail, here is a link to these products on our website. www.selectblinds.com/shop-by-feature/shop-by-feature.html?K=%7C323&K=%7C322
@BigBossBallSoHard2 күн бұрын
Thanks for the upload
@DENISEHOPPAL7 күн бұрын
Can someone tell me where I can buy the replacement slats? Thanks
@SelectBlinds5 күн бұрын
Hi there, our Design Consultants would love to help you find a solution here! Please give our team a call at (888) 309-1130 during business hours to get in touch with one of our team members. 😊
@MaryAnnLowe7 күн бұрын
Mine has 6 plugs on the bottom & I can't get them out. The plugs are deep. It is so frustrating because I have 6 extra slats at the bottom, so I have the slats to replace the broken ones, but I can't get the plugs out.
@SelectBlinds5 күн бұрын
Hi there, our Design Consultants would love to help you find a solution here! Please give our team a call at (888) 309-1130 during business hours to get in touch with one of our team members. 😊
@steveg90077 күн бұрын
How far in do inside Roman shades go
@SelectBlinds5 күн бұрын
Hi there, we typically recommend at least 1 and a half inches of depth within the window for inside mount. Products may differ in these measurements due to the features and fabrics, so always be sure to thoroughly read the Specifications tab for each product before purchasing. 😊
@eykwingnut7 күн бұрын
Thanks!
@prayersnreflection9 күн бұрын
This was very helpful and straight to the point. Thank you for posting
@SelectBlinds9 күн бұрын
We are happy to help! 😊❤
@TudorNerd7713 күн бұрын
Very helpful and clear instructions! Thanks so much!
@Mac-dt6kw13 күн бұрын
Is this guy Bruno Fernandez 😂😂
@raphaelwoods824113 күн бұрын
Actually very simple All the negative comments made me think ….psh I can fix my blinds. Done in under a minute
@Maryam-ue3vw14 күн бұрын
The one sheet instructions is incomplete. The two pieces were not assembled as explained in the video. What is the front and rear of the rail?
@nihilioellipsis15 күн бұрын
Thx. Clear instructs
@sammieb805716 күн бұрын
Shout out to Brandon, showed me how to fix our blinds that get stuck often
@kdegal17 күн бұрын
Great instructions on installation, but how do you unravel the chord in order to raise and lover the blinds. We don’t want to break them.
@SelectBlinds17 күн бұрын
Would you give us your order number so we can look up the product you purchased and provide additional information? Email us at [email protected].
@markweckwerth607320 күн бұрын
When pairing the cellular shade at about 6:02, he did not follow the instructions in the app. The app asked him if the motor jogged. He just clicked by so that he could press the "pair" button in the app. Are you supposed to click by the prompt for whether the motor jogged? Also, earlier in the segment when he scanned the QR code for the cellular shade, the app provided a suggested name of "469262"; however, isn't the right code for cellular shades, "765537"? The code "469262" was the same as for the roller shade earlier in the clip. Could they really use the same code if the roller shade jogs and the cellular shade does not jog? I suspect the editors of this clip used short-cuts and reused segments or didn't bother to make sure the default names were correct. This sloppy editing and sloppy scripting makes it very difficult for someone like me who is having troubling pairing a blind understand how it is really supposed to work. If I had ten hands, I would give this clip, and Select Blinds, and Bond Bridge 10 thumbs down each!! I'm so frustrated - stay away from this product.
@SelectBlinds9 күн бұрын
Hi Mark, thank you for reaching out! Please email us at [email protected] so we can have a representative walk you through the pairing process. 😊
@fionaforward335824 күн бұрын
Another site that does not mention the cleaning of these blinds!
@SelectBlinds9 күн бұрын
Hi there! Cleaning recommendations for each product can be found in the Technical Tips tab on our website. Here is a link to this page! 🤗 www.selectblinds.com/tech-tips/cleaning-window-coverings.html
@soldier_of_love26 күн бұрын
I've never heard of them. I'm scared they'll get stuck and be worse to get unstuck. Going to buy 1 to start. Wish me luck.
@SarcasticPixie27 күн бұрын
I can’t draw through the holes in the top of the headrail because the bar is in the way. It’s literally impossible.
@GregoryAnderson28 күн бұрын
Thanks for a great video on this technique. The only thing I have to do know is learn how to remove the extra slats at the bottom to use them as replacements. That's okay, but not including it is why I'm commenting. Thanks.
@SelectBlinds9 күн бұрын
Hi Greg, we appreciate your feedback! Please reach out to one of our Customer Service representatives via email at [email protected] with any further questions on how to remove the extra slats in your blinds. 😊
@kevinisnguyen29 күн бұрын
I bought the Bond Bridge off Amazon. How do I sync them up with my roller shades?
@ToxicashellmonsantoАй бұрын
WTF? The only thing that is important is to get the height of the rail correct. And your instructions are mark where you want your brackets? I think that's the problem. Where do I want the brackets? How do you measure where the brackets should be?
@lauravj1Ай бұрын
for the double designer how do I select the back solid shade to program? I only was able to set the front zebra shade.
@wilp3230Ай бұрын
How do you program two shades to one channel?
@khankorpofficialАй бұрын
Now do one without removing the blind Syou have 5 days btw before i do something heinous
@georgiejr69Ай бұрын
Interested in cellular blackout shades. I am using a humidifier and will the moisture that is generated by the humidifier affect these blinds?
@gabriellorandiАй бұрын
I hate that you can't close it completely
@davearnold731Ай бұрын
Use a standard cutting board and your sharpest kitchen knife. I made a clean perfect cut in about 5 seconds all the way through.
@jessicarone6218Ай бұрын
Also just moved into an apartment. 😂Lifted the blinds to watch the water fountain and was stuck like Chuck. Until now!!! Thanks again, KZbin! ❤
@M0stBlunt3dАй бұрын
Where do you buy replacement slats from?
@vladvega875Ай бұрын
Very helpful, thank you so much for your video! God bless you and people who helped you to create this video.
@NotaThing13Ай бұрын
Newly installed and they were stuck. I was pulling hard and was about to tear them out. Turns out shoving them all the way up unstuck them. Go figure. I’m an idiot
@YamiSonSCАй бұрын
I tried that first but mine is the pull hard kind I felt stupid as well lmaooo. If only we had each others blinds
@MonsoonBlindsLankaАй бұрын
kzbin.infoEciGKQ3K_Vc?si=Yz-U5kEYQ2zi3Wy9
@MonsoonBlindsLankaАй бұрын
kzbin.infoEciGKQ3K_Vc?si=Yz-U5kEYQ2zi3Wy9
@jaisaquiАй бұрын
Thank you… But what a ridiculous mechanism. It is 2024… Age of smart devices and AI. Create something better. Blinds needs an update.
@Dman4000017 күн бұрын
Agreed blinds are stupid
@CP-zb3ky2 ай бұрын
I don't like the look of blinds, these are just like blinds. Don't you have just the true sheer shade? I rather have dual shades, one sheer for day time privacy and the other for night time privacy.
@masionski2 ай бұрын
my roller gets out of battery without telling me with the alarm beep, then i charged to full my roller and now its not working, it sounds like it has connection with the remote but it doesn't move, i am trying to pair again but when i push the button on the roller 2 secs or more it doesn't do anything, what can i do?
@lo20812 ай бұрын
Please dont waste your time buying this. Its poorly designed I know because we purchased one and it after a few pull downs the entire thing gave up 😅
@megfloyd32392 ай бұрын
I still don't get it. They go down obviously with no issues. But putting them up is definitely NOT this easy with the ones I have. It's like it either wants to work or doesn't.
@dec3352 ай бұрын
Thanks
@tkstick1072 ай бұрын
❤
@kenmarka2 ай бұрын
can I cut the shade it self around locks on my back door without damaging the operation of the shade. Great info
@jeffreygifford99202 ай бұрын
thank you, that just worked for me
@J3rmit2 ай бұрын
I have a Levelor Wand blind that uses a 2 1/2" tilter which is discontinued, tried using a 1" modified tilter, but my blinds are 70" and it's too much load. To do this idea, I need cord tilt mechanism with a 1/8" square hole and relatively close to 2 1/2". Any help would be appreciated.
@toadoctopus23972 ай бұрын
It helped a lot thanks
@DarthCobay2 ай бұрын
How do I do it without removing the blinds?
@L4nd0TheM4nd016 күн бұрын
no
@DarthCobay16 күн бұрын
@@L4nd0TheM4nd0 I don’t recall what exactly I did, but I did it without removing the blinds. So yes.
@dicksdream2 ай бұрын
I guess another comment won't matter!!!!!! These aren't even like the Veneta blinds I ordered~! $U!@ *&(*&_#@!*&_&(^&^%$
@dovewriter12 ай бұрын
Thank you for this video. I did not know how to pull down the cordless blinds installed in my apartment today. The maintenance man told me how to lift the blinds up but not how to pull them down. I finally was able to adjust the blinds.
@doctorevil33262 ай бұрын
Hello I'm just passing through and definitely didn't need a KZbin tutorial on how to lower my blinds