Use Dishwashing Liquid not WD40 and soften rubber in hot water 👍
@scooterWorldScooter3 ай бұрын
@@poloconnor yes that works also
@miko0074 ай бұрын
i bet this rim is wrecked now. it will have paint chips and scratches all over the place, from the ground and the screwdriver...
@scooterWorldScooter4 ай бұрын
@@miko007 Don't worry, there is no damage, dents, or scratches on the rim.
@miko0074 ай бұрын
@@scooterWorldScooter well, thats amazing! not sure how you did it, but thats impressive!
@NaiJerd4 ай бұрын
They also fit for g2 master?
@scooterWorldScooter4 ай бұрын
@@NaiJerd yes it seems because g2 master has also 8.5x3 inc tire
@TrappedInTheVoid.4 ай бұрын
Is boiling the tire also safe too? Cuz my instructions say it
@scooterWorldScooter4 ай бұрын
It is ok but not too long 5-10 min is OK.
@TrappedInTheVoid.4 ай бұрын
@@scooterWorldScooter oh ok, because I might have done mines for abit longer and the color strips ended up melting off the wheel abit but I still got it on, it was a pain in the butt because I used raw materials and tools to get that wheel on
@TrappedInTheVoid.4 ай бұрын
I'm just afraid of uncrewing the front wheels cuz since it's really tightly screwed in there, im afraid I might strip it
@TrappedInTheVoid.4 ай бұрын
The cover for the front wheel
@scooterWorldScooter4 ай бұрын
@@TrappedInTheVoid. Check this one kzbin.info/www/bejne/gXW5fqB9jZJ9g8ksi=X5cxKw4W_j8qJ6g8
@BeatFuZion4 ай бұрын
Behöver man ingen slang i däcket för att fylla på luft??(Vet inget om däck och mekkande)
@scooterWorldScooter4 ай бұрын
@@BeatFuZion dette et punkteringsfritt dekk du trenger verken slange eller luft.
@stinelien12745 ай бұрын
Måtte du skru ut de 12 skruene først?
@scooterWorldScooter5 ай бұрын
@@stinelien1274 Hei. Hvis du mener de skruene på felgen nei. Det trenger du ikke.
@ATL-bu5cr5 ай бұрын
What is a boiling water degree?
@scooterWorldScooter5 ай бұрын
100 degree
@MohdSalman-du9eo5 ай бұрын
Could you please make a video or give some details on how to replace the tube for the rear tire on mi 4 lite 2nd gen . I find it very difficult to disassemble the rear tire
@Kwago15 ай бұрын
I still can't find the one where they boil it in water first.
@scooterWorldScooter5 ай бұрын
Watch this vide to kzbin.info/www/bejne/gXW5fqB9jZJ9g8k
@bosse39885 ай бұрын
hey i got this same scooter and same problem i tried that but it didnt help its not charging
@scooterWorldScooter5 ай бұрын
@@bosse3988 Then you can check either the controller or battery.
@bosse39885 ай бұрын
@@scooterWorldScooter how? do i need unbug battery cable or controller cable? i dont see nohting wrong with my scooter battery but how i check my controller
@scooterWorldScooter5 ай бұрын
@@bosse3988 You can try to charge battery direcly if the battery is charged then the problem is with controller.
@bosse39885 ай бұрын
@@scooterWorldScooter i tried charge direcly but not working but mine e way starts but doesn't load tried change charger
@bosse39885 ай бұрын
@@scooterWorldScooter or do i need get new battery or new charger port or controller?
@GillDundee5 ай бұрын
I got full work out just changing inner tubes this is my quest tomorrow
@GillDundee5 ай бұрын
My cables 10cm I’m dreading this. I have fixed numerous punctures got solid for motor wheel but cable fully attached
@shortmovez58056 ай бұрын
What type of long screws are those called
@scooterWorldScooter6 ай бұрын
I will send the info about it. We sale the screws with tire but you will get info about screws. They are our special screws we have found for installation tire for vsett
@scooterWorldScooter6 ай бұрын
M5 * 100mm
@strunastruna6 ай бұрын
Thank a lot. Worked great 🍻🍻
@scooterWorldScooter6 ай бұрын
You are welcome
@Capcutedits2106 ай бұрын
The screws detach and just make it to where the rim splits into two
@miko0074 ай бұрын
nope. it just will allow you to pull the stator out, you will still have to wrangle the tire on.
@controllerspixelsplayers92026 ай бұрын
I worked for Tire Kingdom as a service manager and one thing we did not do is use lubricants other than actual tire lubricant, others like wd40 can cause problems, i cant imagine that being any different for scooter tires
@scooterWorldScooter6 ай бұрын
It may be possible but I have changed many of tires have not gotten any problem
@leandro.crespo6 ай бұрын
Can you post another video showing how to disconnect the motors? I tried to replace the tire with the cables attached to the scooter but it's really hard to do it
@scooterWorldScooter6 ай бұрын
Yes I can do it. Thanks for the advice
@beratdalkran33516 ай бұрын
Hello, I have a scooter and the normal wheel size is 10x2.125. I bought a solid tire, but the size of this solid tire is 10x2.5 Do you think this size will suit my tr
@scooterWorldScooter6 ай бұрын
It is possible but You need to check the size of rim from size to size and compare it with tire
@phillippapadantonakis19166 ай бұрын
Thank you so much! Your tips saved me a day worth of work
@scooterWorldScooter6 ай бұрын
You are welcome
@lynnslaton50887 ай бұрын
What are these tools called that you are using to help you mount the tire? It looks like a screwdriver, but has a duck-bill end on it.
Grrrr i get mine on the rim the one side sits out and i cant get it centered
@scooterWorldScooter7 ай бұрын
If you get in on the part of the tire centered the left is easy.
@AlextheguitarFreak7 ай бұрын
This video started slow, what was the only one that actually helped me get the wheel on! The knee holding down the one side was my only option as I don't have a bench vise. It's still super difficult but the way I was trying before would have been impossible. Thank you! 👍🏻💪
@scooterWorldScooter5 ай бұрын
You are welcome
@user-http555888 ай бұрын
Making a video and you only just figured it out 😂😂😂😂😂😂
@jamiedobbs2608 ай бұрын
It doesn’t work I tried all of that i’m done with solid tires
@scooterWorldScooter8 ай бұрын
Just put the tire in the hot water, wait about 10 min, and use oil. Try again
@Saunalars8 ай бұрын
Smartaste däckbytet hittills av alla filmer på youtube! Guldstjärna 🥇
@saeidnuri46479 ай бұрын
Im gonna do this when the tired comes 🎉 will write later 😂
@cobiswiss83309 ай бұрын
😂😂😂
@epoh86989 ай бұрын
Hi can you put a 10 inch solid tire on a 8.5 inch tire hub. I mean are the hubs the same size
@ericcwiklinski83979 ай бұрын
Wo bekomme ich die reifen 🤔🤔
@casaoui64k8 ай бұрын
aliexpress
@yigga839 ай бұрын
What protein powder do you use?
@scooterWorldScooter8 ай бұрын
Thanks:)
@Christian.nordin10 ай бұрын
Ska beställa 8,5 tum 2-Pack - Xiaomi Däck med Verktyg - Punkteringsfritt. Tror du det passar på min E-wheels Es2 v2?
@scooterWorldScooter9 ай бұрын
Ja det passer
@Christian.nordin9 ай бұрын
@@scooterWorldScooter Det funkade hur bra som helst 👍
@joelfabillar4178 ай бұрын
Hi! Passer også til min ewheels 2s v2 pro?
@Christian.nordin8 ай бұрын
@@joelfabillar417Du behöver storlek 10" då 👍
@scooterWorldScooter8 ай бұрын
@@joelfabillar417 Hei. Er din pro long range eller standart? Hvis det er standart ja det passer men hvis det er long range da det må være 10x2.00 eller 10x2.125. www.elsparkesykkelverden.no/shop/punkteringsfritt-dekk-til-elsparkesykkel-10%e2%80%b3x2-00/ www.elsparkesykkelverden.no/shop/punkteringsfritt-dekk-til-elsparkesykkel-10%e2%80%b3x2-125/
@diyzona10 ай бұрын
If you put it in boiling water for 10-15min the process is even faster and easier
@scooterWorldScooter9 ай бұрын
Yes you are right but a bit dangerous
@fredl.c80299 ай бұрын
I put mine in the oven for a bit
@heuristiclynx6 ай бұрын
That won't damage the rubber will it?
@diyzona6 ай бұрын
@@heuristiclynxnot at all. Rubber is cooked in vulcanization so placing it in a hot water will just make it bit stretchy
@heuristiclynx6 ай бұрын
@@diyzona Thank you for clarifying!
@عمر-ث8غ5ع10 ай бұрын
ما اسم المادة التي قمت برشها؟
@scooterWorldScooter10 ай бұрын
It is WD-40 but You can use any lubricants
@horseiminarm11 ай бұрын
Kokar du däcket innan? Ska byta till punkteringsfria däck här nu i veckan
@scooterWorldScooter10 ай бұрын
Hei. Det kan du koke dekke i vann også max 5 min. Men det er nok også å sette det i kokt vann i 10 min.
@Eurotruckpro9 ай бұрын
Hej, jag kokade själv hjulet eftersom det blir mer elastisk då vilket gör det lättare och få på det. Diskmedel rekommenderar jag också
@Christian.nordin9 ай бұрын
@@Eurotruckpro Gjorde samma här, kokade i 15 min o sen sprayade diskmedel på o 3 timmar senare var det på :)
@Eurotruckpro9 ай бұрын
@@Christian.nordin 🤣
@PWRpengbot11 ай бұрын
Hvor i Norge er du?? Har et punktert forhjul på el sparkesykkelen min og vet ikke hvordan det skal fikses selvom det vises her. Er ogs usikker på hvilket dekk skal bruker. Og vil ikke ødelegge motoren 😅
@scooterWorldScooter11 ай бұрын
Er i Kristiansand du kan skrive til meg via finn.no annonsen. www.finn.no/bap/forsale/ad.html?finnkode=321416082
@PWRpengbot11 ай бұрын
Er det sånn man bytter punktert dekk foran ?
@scooterWorldScooter11 ай бұрын
Hei. Ja det samme måte du kan bytte.
@petersteiner87211 ай бұрын
What do you all do with the valve hole in the rim? Leave it open…?
@scooterWorldScooter11 ай бұрын
I leave it open. But You can keep the valve also.
@petersteiner87211 ай бұрын
Thanks!
@mustafasolmaz594611 ай бұрын
After selling your soul to the devil...
@scooterWorldScooter11 ай бұрын
Haha, I appreciate the humor! Changing solid tires can definitely feel like striking a deal with the devil sometimes, but it's all part of the fun, right? Thanks for watching!
@hairyonions11 ай бұрын
you made it look so easy
@MCGrygi Жыл бұрын
1 tyre wrong side removed :)
@besttrending3332 Жыл бұрын
Thank you very much, I was thinking how to change my tyre and your video really help me out.❤