They do make the 3A+ sife panel and I highly recommend
@TantoBrownBear5 ай бұрын
I do have that now. It'll be in the update video, whenever that is.
@colbyc.66988 ай бұрын
The best video on the use-tube for this comparison thank you
@albertptran9 ай бұрын
Woah
@deathtothewageslave Жыл бұрын
Shit my muzzle brake has less flash than that can
@josephcraig765 Жыл бұрын
I just ordered mine. Same one but I was told the size chart they use is inaccurate so fingers crossed I guessed Right .
@basicinfo5504 Жыл бұрын
Just over 2 years...how's it holding up?
@TantoBrownBear Жыл бұрын
Holding up well besides some wear and tear where it rubs against a rifle mag every day. I keep putting off that video. I'll get to it eventually.
@NayokeHenji9 ай бұрын
@@TantoBrownBearI've worn it as security patrol for about a year myself. held up not bad. no buttons have popped off or anything and that center pocket is a life saver for my work phone, constantly pulling it out and putting it awayfor work duties. breast pockets are about what you'd expect on a uniform shirt, if not a tad smaller.
@wooddawg4868 Жыл бұрын
Get the side armor
@TantoBrownBear Жыл бұрын
I have it. Just didn't have it in the video.
@rf9078 Жыл бұрын
Just curious what ammo was this? I'm curious how a ammo that is flash suppressant would do like gold dot
@TantoBrownBear Жыл бұрын
This was absolute junk steel cased stuff. So I'm sure it would be even more impressive with better ammo.
@rf9078 Жыл бұрын
@@TantoBrownBear thanks dude
@baddriversofthenorcalarea500 Жыл бұрын
It has been one year, I request the update video.
@williamwhite1982 Жыл бұрын
Wow, night and day difference!
@Nathan-jh1hoАй бұрын
Yhea, without the FH it's completely stupid, more flash than a lantac dragon brake
@anthonyzuccaro1 Жыл бұрын
What’s the verdict on this?
@TantoBrownBear Жыл бұрын
I'll be making the follow up video soon. To make it short and sweet: Pros: Adjustable size and nice fit, comfort, clean appearance. Cons: No pouch for higher level trauma plate, chest pockets are very tight (only going to be able to fit notebook or business cards), I wouldn't mind a little more molle in strategic areas, and I'm having some wear where it comes into contact with my rifle mag. Overall it gets a pass, but there are some changes I'd make if it were up to me and some features I've had in past vests that I missed with this option. I'll go into deeper detail in the video.
@walterwickwire270 Жыл бұрын
How much is this vest
@TantoBrownBear Жыл бұрын
Check their website for options and updated prices. Just look up safe life defense and you'll find them.
@franciscofausto1378 Жыл бұрын
is that the NAVY BLUE or the MIDNIGHT BLUE color?
@TantoBrownBear Жыл бұрын
That's the black one.
@madeinoregon5062 Жыл бұрын
Waiting on my stamp for my S. A little bummed to see how much flash there is. Definitely an improvement with the 5.56 end cap, but not what I was hoping for.
@TantoBrownBear Жыл бұрын
Yeah it's also gonna depend on other factors. But with my set up, it's not even an option to go without the flash hider end cap.
@AKAKILLINGKING2 жыл бұрын
It’s been a year show how it’s set up sbd how it held up
@TantoBrownBear2 жыл бұрын
Yep, gonna do that soon 👍
@charlesotto75842 жыл бұрын
Super helpful. Thanks
@tradbowhunter532 жыл бұрын
Is this on a sandman k?
@TantoBrownBear2 жыл бұрын
yessir.
@thegregshow17612 жыл бұрын
Is it 10x12 capable
@TantoBrownBear2 жыл бұрын
Per their website it is, but I haven't fit tested any other soft armor or plates besides their own.
@kevinzhu68162 жыл бұрын
Do you recommend the e brake ?
@TantoBrownBear Жыл бұрын
Yep. I'd check out Sage Dynamics' video on it if you haven't already.
@functioningbroken34972 жыл бұрын
You try this on the 13.7 you got?
@TantoBrownBear2 жыл бұрын
Yessir. Haven't taken videos yet for a comparison.
@functioningbroken34972 жыл бұрын
@@TantoBrownBear handles flash good?
@TantoBrownBear2 жыл бұрын
@@functioningbroken3497 haven't had a chance for a night shoot yet. When I do I'll get a video up if you wanna see it.
@functioningbroken34972 жыл бұрын
@@TantoBrownBear definitely got the same upper and looking at dead air sandman
@husky701rider92 жыл бұрын
I’m so glad I found this thank you very much. Would also love to see an e brake with all the endcaps if that’s an option for you. Just bought a sandman s for my 12.5 556
@TantoBrownBear2 жыл бұрын
I have the e-brake now, and I can upload a video with it paired with the flash hider end cap sometime. I probably won't do it with every end cap though as it seems that the flash hider end cap is the obvious choice for me. Thanks man.
@bj78152 жыл бұрын
@@TantoBrownBear would love to see that comparison.
@dragon3allzdeep3252 жыл бұрын
@@TantoBrownBear did you still plan on doing a comparison? I’m about to buy my first can for my 12.5 and I’m honestly torn between the rc2 556 and the sandman s. My main concern is muzzle flash, if you do the comparison could you show the difference with e brake with 30 cap and e brake with 556 cap? I’ve had a lot of people tell me to go 30 for my first can. Which one would you recommend?
@TantoBrownBear2 жыл бұрын
@@dragon3allzdeep325 well I only have the Sandman K so my video won't really be much of a help to you. All I can say for sure for you is that if you get any Sandman, get the flash hider end cap. The difference between the 5.56 and 30 cal end caps wasn't big enough to justify paying extra in my experience. The plain 5.56 end cap seems pointless to me when the flash hider exists, but everyone has different uses in mind. I've only had the Sandman K so I can't recommend one over the other.
@dragon3allzdeep3252 жыл бұрын
@@TantoBrownBear ahh gotcha. In your experience does their seem to be a huge difference in muzzle flash between dedicated 556 cans and 30 cal cans with 556 ends?
@jimmyrogue78172 жыл бұрын
I would like to your setup. Maybe I second video!
@seanrodriguez23842 жыл бұрын
Hey is there anyway you can do the same test but using the muzzle break and then the flash hider
@TantoBrownBear2 жыл бұрын
Muzzle brake that threads to the barrel or the brake cap on the suppressor?
@seanrodriguez23842 жыл бұрын
@@TantoBrownBear threads to the barrel
@TantoBrownBear2 жыл бұрын
@@seanrodriguez2384 I don't have the muzzle brake for the barrel, also my flash hider is pinned and welded. Sorry brotha.
@seanrodriguez23842 жыл бұрын
@@TantoBrownBear its all good, great video tho
@williamjames89242 жыл бұрын
I drink Black Out coffee because it supports 2A!
@XCaPTainClipzX3 жыл бұрын
So you can’t insert plates into the Uniform vest?
@TantoBrownBear3 жыл бұрын
When you say plates do you mean a smaller hard plate?
@XCaPTainClipzX3 жыл бұрын
@@TantoBrownBear Yes like level 4 ceramic plates or even The FRAS soft armor plates
@TantoBrownBear3 жыл бұрын
@@XCaPTainClipzX nope, no slot for a hard plate. If you wanted to be able to insert a rifle rated plate, you'd need to get an additional slot sewn into the carrier.
@gregorycharles49723 жыл бұрын
does it have a slot to put a trauma plate?
@TantoBrownBear3 жыл бұрын
Nope, one of the downsides. You'd have to get one sewn in.
@mahgoubmagdi19813 жыл бұрын
What color is this?
@TantoBrownBear3 жыл бұрын
I got the black one.
@anthonyholbrook10263 жыл бұрын
Just got one, same style uniform carrier with molle. How is it working out with pouches and tazer attached? Thanks!
@TantoBrownBear3 жыл бұрын
As of yet I haven't had a shift with it. I attached the taser mount, radio pouch and admin pouch. Once it's all set up and I get some time with it, I'll update. Feels good though
@bonecoldfleasaustin3 жыл бұрын
I have the LVL 3A+ one. I have a radio pouch, a utility pouch, flashlight pouch, mace pouch, and mag pouches attached to mine. The pockets are tiny, hence the utility pouch for notebook, phone and such. Love mine. Very comfy.
@alexmoscatello69433 жыл бұрын
This man is a legend, instant follow!
@mstrchief433 жыл бұрын
Wondering why they dont ship with them. Another $200... in end caps
@CarlosDangerTheThird Жыл бұрын
Yep. Sadly they got me. Just ordered both
@lobasboyfriend80733 жыл бұрын
Nice
@EnriqueLopez-sv8ck4 жыл бұрын
Thanks for the video! I have a radian 14.5 with dead air flash hider pin and welded. Same as you, wanted k for the 14.5, and S for the shorty 300b. Since the 14.5 is my primary, was happy with the flash suppression, but wanted to get the k with flash hider cap and e break. Do you fill the flash is more with the can and the cap vs no suppressor at all?
@TantoBrownBear4 жыл бұрын
I didnt test or record the gun firing with just the flash hider for comparison. I do know that I've never had noticeable flash from behind the gun in low light with either the flash hider by itself or with the suppressor with the flash hider end cap.
@EnriqueLopez-sv8ck4 жыл бұрын
Tyler Meshigaud awesome, thanks for the quick response!!
@NeonVars4 жыл бұрын
That is a massive different enough to warrant the price for what you're getting. You can also tell the DB difference on camera between the 30 cal 0:01 and 556 flash hider 0:22.
@TantoBrownBear4 жыл бұрын
There may be a slight difference caught for sure, when you're behind the gun you can't tell. Thanks 👍
@NeonVars4 жыл бұрын
@@TantoBrownBear I believe it would balance out to the shooter. Less gas being dispersed at the cap probably means more gas at the ejection port.
@ortiz129864 жыл бұрын
If you did it all over again would you still go with the K or chose the S?
@TantoBrownBear4 жыл бұрын
I think you have to take everything into consideration. I have two BCM uppers, an 11.5 and a 14.5. My 14.5 I use at work and wouldn't want the S on it. I do now want an S for my 11.5 for home defense or range time. All depends on the setup you're going for man! Different cans for different jobs / guns.
@GripAndRip254 жыл бұрын
Straight to the point !
@chenlmax4 жыл бұрын
Awesome video thanks. So that was on a 14.5" gun?
@TantoBrownBear4 жыл бұрын
Correct. 14.5 with dead air's flash hider pinned and welded.
@apollopitt77334 жыл бұрын
Thanks for the vid. My sandman L on my 10.5 blkout sounds like a staple gun. Im left handed and the gas isn't even noticable. I'll post a vid soon
@TantoBrownBear4 жыл бұрын
Thanks for checking out the video! I'm sure that setup is Hollywood quiet
@apollopitt77334 жыл бұрын
@@TantoBrownBear just got it about 3 weeks ago after a depressing 10 month wait. Very happy with my decision. Can't wait to receive my order of brakes to hear it on a Grendel and a 308. Thanks again sir