Goshi DIY

Пікірлер

@NallDave Күн бұрын

Thank You. Just changed my bulb. That clip is a bit stiff, so I just pushed it harder before moving it over slightly as your arrow shows. Spot on. I'm keeping a spare bulb in the car now I know how to do it. Probably sensible to buy a good quality bulb, Bosch, Osram or Lucas.

@goshidiy6560 Күн бұрын

@@NallDave you're welcome 😊

@rosi57575 9 күн бұрын

I have done the same thing to the FAP on my old C5 but I used a pressure washer instead of a hose, and I must say, the car felt as good as new afterward. I replaced it for a DS5 and got the same error message, so I guess I'm going to be doing it once again..

@Nytroxfn649 18 күн бұрын

You can’t see what going on in this video

@kimquyluu6771 24 күн бұрын

Thank you share clip

@maxdredi Ай бұрын

Best instructions on the internet, thank you!

@kennyodernicht7324 Ай бұрын

👌😉

@Ohpium-L2E Ай бұрын

U. Saved. My. Life.

@OlafJungbluth Ай бұрын

Well done!

@annerex1288 Ай бұрын

❤ Thanks, you made my day 🎉 Without your video I wasted hours, lost my good mood and blessed my hands by changing the bulbs of my Citroën Jumpy.

@goshidiy6560 Ай бұрын

@@annerex1288 my pleasure

@petervanwijk2639 2 ай бұрын

A big thanks!!! This should be something car manufacturers should do, but since they do not, I am so grateful this content is made available by providers like you! Thanks again

@goshidiy6560 2 ай бұрын

@@petervanwijk2639 thanks for your kind comments

@patrickchermette7838 2 ай бұрын

Bravo tres bon travail en respect pour la nature

@jacquesginet2114 2 ай бұрын

il faut d'abord débrancher la cosse du plus avant de dévisser ces deux ecrous car s'ils touche la masse c'est la cata !

@grahamwinteringham6012 2 ай бұрын

Can you do one taking it off the car please

@leewalerzak 3 ай бұрын

Iv just done this on my van with the same stuff but I couldn't get the bag to seal the hole it kept leaking I ended up just giving it a bath side on fully submerged.. question? Where them small pipes screw into the dpf are they loose? Mine seem to have a lot of movement in them even though the bolts are nipped up tight

@AmirTaravatidamsaz 3 ай бұрын

🎉❤😅😢❤😢😢😢😢😅🎉😢😢😢😂❤😂😅😂❤🎉😢🎉🎉😊😮🎉😂😅😢😅😅🎉❤

@luisyepez9904 3 ай бұрын

Saves a lot of money doing it yourself. Thank you.

@goshidiy6560 3 ай бұрын

@@luisyepez9904 I am glad to hear that

@DeanDavidson-b2r 3 ай бұрын

I have a powermaster alt, only 10 yrs old, went from a 50a to a 75a, did it in the vice, total sucsess. Thank you.

@goshidiy6560 3 ай бұрын

@@DeanDavidson-b2r I am glad to hear that 😊

@grahamwinteringham6012 3 ай бұрын

How often should you take the hdi1.6 for a long drive to clear one keep it cleared 2015 27k mileage

@goshidiy6560 2 ай бұрын

@@grahamwinteringham6012 I cleaned mine only twice in 10 years and 150,000 mileage on the clock and still doing fine

@grahamwinteringham6012 2 ай бұрын

@@goshidiy6560 I take it you do long journeys

@emadthyab1367 3 ай бұрын

Thank you bro. This the video what I’m looking for

@noJackBootThugPigs 3 ай бұрын

WTF, y do u even have a YT channel with this shit! 😢

@oldskooltv8787 4 ай бұрын

I have 2 pulley pullers, 1 big 1 small, it’s rusted on and they won’t even get it to budge. Tried pry bars, applied WD-40 first thing. Been using an air powered impact, not sure what to do from here. But if there’s a will, by god there’s a way.

@MarshallBLewis 3 ай бұрын

you should make a video of how you figure that out cause the rusty stuck ones are what people need the help with not the easy peasy ones

@oldskooltv8787 3 ай бұрын

@@MarshallBLewis I’ll try one day once I figure it out myself. Doesn’t mean it’ll work for everyone. I rebuild alternators and starters for a living

@oldskooltv8787 3 ай бұрын

@@MarshallBLewis the way I got the one off I was mentioning in the comments is just working with it for 30 minutes till I finally got it to budge then it was butter from then on out.

@ricardoseller9361 4 ай бұрын

Can i have number of key number for filter?

@goshidiy6560 4 ай бұрын

@@ricardoseller9361 27mm

@JavierOyarzún-e6u 4 ай бұрын

Que medida es la correa

@AA-uv3uf 4 ай бұрын

Bro. I've been doing this for hours.b

@hrcsourcingltd7858 4 ай бұрын

Thank you .

@johnstockwell8322 4 ай бұрын

Why are you only wearing one glove??

@alvinmatthew9080 4 ай бұрын

I need one of these subframe where is the best place to buy one ?

@pedrojosemartinezgomez8242 5 ай бұрын

Te recomiendo montar una downpipe y te evitas todo ese trabajo de por vida. Saludos

@stephenburgess626 5 ай бұрын

i suspect he used the impact driver wrench right next to this scene on the right. Loosened it first and then for the video used these hand tools with ease

@joseramos-jo7eq 5 ай бұрын

Change tyres lol

@christophermatelunaurbina5868 5 ай бұрын

Que producto uso?

@goshidiy6560 5 ай бұрын

Wynns off car DPF cleaner

@JavierVillamon 6 ай бұрын

Is not necessary to dismount the DPF to clean it. With the Diagnosis Equipment to can do one Forced regeneration, and it will be better if you use one maintenance additive to keep it clean. You will save a lot of time and will not be necessary to waste time dismounting and mounting the piece.

@leewalerzak 3 ай бұрын

Forced regen is never a good idea it will contaminate your oil you need to fix the problem at hand

@Headingmashine1 2 ай бұрын

Can forced regeneration clean it like this, when you physically take it out and wash it couple times? I'm about to take it off and clean it preventively.

@Caluy 6 ай бұрын

thx <3

@ponz3370 6 ай бұрын

hi, the bleuthoot works?

@VisserDOTconfig 6 ай бұрын

Fucken eh, ya know what? Fucken eh you saved a lotta people some headaches

@davidjurca8049 7 ай бұрын

What is the name of that special key ?

@goshidiy6560 7 ай бұрын

Brake Piston Rewind Tool

@davidjurca8049 7 ай бұрын

@@goshidiy6560 thank you

@davidmorenovelasco7053 7 ай бұрын

Se puede poner mojado o no

@carlomaratta5636 7 ай бұрын

Thank you for the useful and helpful video!

@jessicamella6063 8 ай бұрын

Que medida es???

@thomasadmiral3401 8 ай бұрын

after 10.000km repeat this :)....

@John-m5k4r 8 ай бұрын

Really good clear video… thanks!!

@eanharrison681 8 ай бұрын

This is totally phony. These nuts are almost fused together. I suspect he used a heating torch on the nuts

@eduardodaquiljr9637 9 ай бұрын

Using locking plier will make bites or scratches to metal surface of parts,is there no other tools we can use instead of locking plier?

@MrGoogelaar 5 ай бұрын

And exactly where do you see that he used locking pliers on any part?

@MarshallBLewis 3 ай бұрын

@@MrGoogelaar the vice grips on the socket

@MrGoogelaar 3 ай бұрын

@@MarshallBLewis Exactly, the vice grip is on the socket and not on any part of the alternator so there will be no marks made on any part of the alternator as @eduardodaquiljr9637 said...simple, ain't it?