Hi, Do we have any cheap alternative in the market for TS54? Thank you
@jmartini2387Ай бұрын
What happens when they break repeatedly, and produce multiple false positives?
@JulieMurray-g1g2 ай бұрын
Replacement wheel set for the Model 700 is available. Also if you need a replacement axle we can supply as well. Please let us know.
@denisvilca4712 ай бұрын
Ptm pensando que el vídeo era en español y empieza hablar en ingles!
@JasonsLabVideos3 ай бұрын
Thank you for making this video, was wondering how this worked !
@Rafao-qp2kb4 ай бұрын
If you have those disposable ribbonizers clips, you can apply the glue after use this tool on the video. Of course will take more time, but it's a great tool.
@gradyrm2375 ай бұрын
Hard pass.
@juliemurray9483 Жыл бұрын
In answer to your question after consulting with the manufacturer, no, the RWC does not do PoE, it can actually damage the unit if plugged into the wrong port. The LVPRO10 will do PoE though.
@Henry_Jones Жыл бұрын
Certifies up to 1G for a fraction of the price of the competition. Sold. Now you guys need a 10G certifier
@marcomark8 Жыл бұрын
I have a 20-25 year old one of these I purchased from Calumet photographic. I never knew of the lower loop holders after all these years. Thanks. Although it has seen a lot of use, it still works great. I need to replace the wheels though. Even with bad wheels, it is really easy to roll. Do you know what model number the wheels would be. I know they are 6" x 1 1/2" steel hub.
@janamccord Жыл бұрын
I use it weekly. Works great and never messes up. Just saying
@ranger5705 Жыл бұрын
This tool is theoretically correct but not practically. I am still using the fuzjikora glue ribbonizer.
@juliemurray9483 Жыл бұрын
Hello, We checked with the manufacturer of Sticklers Products. They confirmed that your hands touched the outside edges of the wipe but not the area that was used for adding the fluid. That area was untouched, thus the CleanClicker touched the wetted material where no fingerprints existed. Hope this helps you.
@Brandon_B. Жыл бұрын
LOL dummy touched cleaning wipe with hands wipe now contaminated then touched one-click cleaner to contaminated wipe then to fiber now one click cleaner tip and fiber are contaminated
@ANANDARAJBABU Жыл бұрын
This tool wanted link send me
@specializedtools Жыл бұрын
Thank you for your interest! You can review specs and order the AFL RT-02 Ribbonizing Tool - at www.specialized.net/afl-s017465-fujikura-rt-02-ribbonizing-tool.html .
@danmekeel7758 Жыл бұрын
I still love my 700. but the cords have Crapped out. any ideas about better Cords? the only weak spot, did you not test them? Throw me your latest idea from your testing.
@specializedtools Жыл бұрын
Specialized Products does have replacement bungie cords available for the 700 series carts at - www.specialized.net/norris-bungee-cord-w-rings-for-utility-telescoping-luggage-carts.html . However, if you believe there may be a defect with the cords that you received the manufacturer Norris Products does have a limited lifetime warranty on their hand carts. You can reach one of their customer service representatives at 513-688-7300 to assist you with any warranty issues.
@marius9044 Жыл бұрын
Can you do a loopback test with the fluke certifibre pro? Not the otdr version. Can i still test to measure where the fibre is broken?
@americanindeon Жыл бұрын
Nope Still not better than the old glue.
@FroggyFractions2 жыл бұрын
Thanks buddy
@kylemartinson7222 жыл бұрын
Oh that seems handy. How close is it?
@Spicoli1Bilek2 жыл бұрын
I want to see the full parameters of the test and as others pointed out you are using the cheapest of the cheap.
@franksforza83682 жыл бұрын
Don't work on electric meter locks....what a scam
@larrydavis56702 жыл бұрын
did you find one that did, I need one
@anthonyarcuicci12892 жыл бұрын
The glue is mandatory. If not, When you lift the fused ribbon into the heater, the fibers will cross up and either break or macrobend in the sleeve.
@ronaldstephens94322 жыл бұрын
Open end wrench that opens up
@jmoosic2 жыл бұрын
Im guessing there are special materials needed not just standard launch cables?
@remarkolayao88192 жыл бұрын
How to calibrate the machine because dnt measure the meters
@user-bh2hs3yi9c2 жыл бұрын
El mensaje : "maneja pedo"
@tuyenkhoang2 жыл бұрын
thanks. this is what I am looking for
@JuanCarlossystemonline2 жыл бұрын
Hola es un gusto saludar por favor existe la posibilidad de comentar si esta maquina certifica RWC1000K BYTEBROS Certificadora puede certificar cable coaxial y si lo hace como se certifica por favor Hello, it is a pleasure to say hello, please, there is the possibility of commenting if this machine certifies RWC1000K BYTEBROS Certifier can certify coaxial cable and if it does it as it is certified, please
@halekus76642 жыл бұрын
Supper!!!
@Legend813a2 жыл бұрын
What??? Connect the panels to the charge controller BEFORE the battery?
@SkillsBattles2 жыл бұрын
good holders
@hobie18m3 жыл бұрын
I would love to know more but this video was totally useless
@iainharper26443 жыл бұрын
Hello, This is Iain Harper, Director of Inside Sales here at Specialized Products. Please send me an email at [email protected] and i will put you in contact with our Zamp Sales Engineer.
@JJ-sv9kh3 жыл бұрын
👍👍👍👍👍👍
@JJ-sv9kh3 жыл бұрын
👍👍👍👍👍👍
@sarakcoelho42963 жыл бұрын
Can sfp cards be diagnosed with this unit? Thank you
@kuenaja2 жыл бұрын
this is for phisical testing, not upper layer. you can use ftb-88260
@asmaraeritrea30013 жыл бұрын
Excellent but what is that all background music pls
@by_a_tryhard_lol89013 жыл бұрын
Is there a seal replacement for this ?
@brucesummers74483 жыл бұрын
Skips over attaching the wire to the panel which I would expect should be done before screwing the panel mounts down on the roof. Also no mention of the fuse box that is shown in the diagram.
@iainharper61483 жыл бұрын
Hello, My name is Iain Harper, Director of Inside Sales here at Specialized Products Company. We have a Zamp Solar Sales Engineer on site. Please contact me at [email protected] and i will get you in contact with our Engineer.
@emmanuelmagallon28103 жыл бұрын
Okay now how do you strip the fiber after you get to that point? We tried to strip it with a Fujikura RS03 and it strips only the outer fibers and just pulls on the rest
@asmundke3 жыл бұрын
Then you need to change the settings on the RS03.. More heat i guess...?
@daniellouress66983 жыл бұрын
O meu está tirando o acrilato da fibra
@nghiemnguyen52883 жыл бұрын
Awesome. Thank you.
@coreyharrison3244 жыл бұрын
How would anyone finish splicing in a maintenance window with this? It looks terrible. Those are just 12 fibers smushed together not a ribbon. Doing it by hand is still the fastest way and makes the best ribbons. You guys have good glue though @AFL
@iainharper61484 жыл бұрын
Hello, My name is Iain Harper, Director of Inside Sales here at Specialized Products. Yes, we can provide the Ribbon Forming Adhesive from AFL. Please contact me at [email protected]
@lucasmays16223 жыл бұрын
You don't have to wait 30sec per ribbon for curing, you don't have glue everywhere, and you don't have to sort through the bundle in the color-coded order, just grab one and throw it in the proper slot.
@coreyharrison3243 жыл бұрын
@@lucasmays1622 When doing big counts you ribbonize all at once so it really doesn't matter how long the curing takes. If you have glue everywhere you need to chill out, I do these often and just barely wipe my fingers between each ribbon and have no problems with excess glue. This looks like a tool to let inexperienced splicers get in over their heads.
@lucasmays16223 жыл бұрын
@@coreyharrison324 Good point... If you're that skilled and organized, I can see that. I've just seen a lot of folks who are neither lol so definitely an ease-of-use factor with this tool I think. I also like that this loads directly into the holder, so yes you need a few more holders, but you can do the same thing (ribbonize all at once) and then just pop fiber holders in the splicer 1 by 1, rather than having that extra step later.
@JohnBaker30004 жыл бұрын
I bought this. The key ends are too soft, and wear quickly.
@iainharper61484 жыл бұрын
Hello, My name is Iain Harper. Director of Inside Sales here at Specialized Products Company. I would like to hear more about your issue. So I can contact the MFR. and see if this is a on going issue with this tool. Please contact me at [email protected]. Thank you!!
@maximusvonderbrewskis2 жыл бұрын
Did they warranty your purchase?
@covidisascam82084 жыл бұрын
Lol what happens when you have re burns?Go through the same process? I’ll stick to my sumitomo thank you, in the time it took for 1 ribbon I’d have 3 done
@lucasmays16223 жыл бұрын
you keep your thumb on the fibers behind the clamp, open the clamp, and pull the fibers forward at the nose - pretty easy
@rawdoggnrandoms3 жыл бұрын
An experienced splicer could probably do it a lot faster than a product demonstrator. But I was wondering the same thing about reburns. Ribbonized splices don't always go right on the first attempt...
@michaelbaker80744 жыл бұрын
How do you get the 12 single fibers in heat sleeve
@lucasmays16223 жыл бұрын
You put the sleeve on before you follow the steps of this video.
@Finny147544 жыл бұрын
Does this only work on 1 type of Mod ?
@chrismoz19164 жыл бұрын
Here is what Fluke Networks shows for the different applications. Hope that helps. www.flukenetworks.com/edocs/datasheet-jackrapid-termination-tool