Geno D

Пікірлер

@LordTaylor007 11 күн бұрын

Thanks man. You saved me 👊🏼

@RyanPedersen 23 күн бұрын

Solid video. Here are a few additional steps to consider including but nothing major 1. Only need to remove the bottom bolt then you can swing the caliper up and hang with a Bungie. Check brake hose is not twisted/pinched 2. Torque bolt to 49 ft lbs 3. Check brake fluid reservoir isn't full before pressing in caliper 4. Add grease to bottom and top of each pad where it contacts the clip. Not sure exact purpose but watched in other videos. Maybe just helps it slide in. Danger is getting grease on the pad surface so definitely could skip this one

@genod7045 19 күн бұрын

@@RyanPedersen what about retracting the brake caliper piston once you’ve added newer brake pads(which are thicker than the worn ones), wouldn’t the piston also be more outward to compensate for better breaking thus needing to be pushed back in

@RyanPedersen 19 күн бұрын

@genod7045 agree 💯 . looks like the video demonstrated this when the c clamp was used to press in the piston with the old caliper. Only issue would be if the fluid reservoir didn't have space for the fluid being pressed in. Guessing that's a pretty rare occurrence

@genod7045 14 күн бұрын

@ I did not record reservoir cap off that is definitely apart of process

@Splot2 Ай бұрын

If you don’t have a specialty turning tool you can jam a 3/8” ratchet extension into the center of the piston and turn it

@dthompson1864 Ай бұрын

Thanks! Never did this job before and your video was a big help!

@danielaguirre4772 Ай бұрын

Great video💪🏼

@javierpnd3625 Ай бұрын

Ese ventilador pequeño se queda prendido siempre le puse uno nuevo es igual lo puse en otro auto están buenos en mi auto se queda prendido siempre ?

@genod7045 Ай бұрын

@@javierpnd3625¿ por que?

@javierpnd3625 Ай бұрын

@ posiblemente la resistencia de erizo está mala

@JDR1227 Ай бұрын

Did you put anything to seal the metal gasket? Or it just bolts in ?

@genod7045 Ай бұрын

@@JDR1227 yes it came with a new metal gasket; try laying the gasket onto the egr valve then running at least two bolts through both pieces to decrease chances of gasket slipping out of place when bolting back on

@andreh4287 Ай бұрын

Heyy how are u

@eliteselites6889 Ай бұрын

So unprepared and slow

@MrSoccerman4u 2 ай бұрын

What was the purpose of replacing the 02 sensor ? What was the car doing? And was a light ON in the dash cam? Thank you

@genod7045 2 ай бұрын

@@MrSoccerman4u yes the vehicle was throwing a code for the upstream O2 sensor

@traciewayman6201 2 ай бұрын

8mm screw and unloosen had me for a second but overall clear instructions, helped many people out im sure

@pressinpickle345 3 ай бұрын

No hate but is this what KZbin has come to.

@genod7045 3 ай бұрын

@@pressinpickle345 you’re engaging my content…it’s controversial…I’m doing something right ❤️❤️

@SuperChocolateCocoaBear 3 ай бұрын

Thanks so much it took me no time at all to replace with your help.

@johnreyes3000 3 ай бұрын

Thank you very much my good man. For this very helpful and useful tutorial

@franknoyola6693 4 ай бұрын

It would be helpful to give sizes tools

@genod7045 4 ай бұрын

@@franknoyola6693 I’m on it

@heyitsjustjacob5308 4 ай бұрын

Thank you so much.

@AyeThereGoMalco 4 ай бұрын

You didn’t replace anything.

@genod7045 4 ай бұрын

@@AyeThereGoMalco Full video on channel please watch and subscribe

@genod7045 4 ай бұрын

This is an upstream demonstration only

@neilwilliams2193 4 ай бұрын

Thank you so much for your helpful video. Where is the other one please?

@neilwilliams2193 4 ай бұрын

Did you know that if you soak your sensor in toilet cleaner for 15 minutes then wipe it dry. Now you have a clean sensor.

@genod7045 4 ай бұрын

@@neilwilliams2193 I’ll be waiting on that upload vid brother

@jamesstacks4451 5 ай бұрын

FUCKING HERENDOUS 😂😂😂😂😂😂😂😂😂

@genod7045 4 ай бұрын

@@jamesstacks4451 everyday is a new task

@AJamesCo 5 ай бұрын

Wheel stud. Studded tires are something else altogether.

@sumtingwong5942 5 ай бұрын

Yup

@David-uh9cc 5 ай бұрын

What's so spectacular and noteworthy of the basic, common procedure to remove a broken stud???

@genod7045 5 ай бұрын

@@David-uh9cc To serve as insight for a fresh a pair of eyes with interest to these kinds of things

@David-uh9cc 5 ай бұрын

@@genod7045 I see, putting it that way, I agree

@ilarionispas5104 5 ай бұрын

This is bad

@karsonrodgers4257 5 ай бұрын

Wow, super simple. Thank you for sharing!

@waymondglasgow2326 7 ай бұрын

Thanks big dog you made real easy

@genod7045 6 ай бұрын

No problem 👍

@christophermaldonado1777 7 ай бұрын

More often than not, those tabs will break especially on a high mileage. Take a pocket screwdriver and lift the other end and then remove it. Works most of the time. Hondas and toyotas are notorious for breaking those clips. If the lock does break, use a dab of silicone between the 2 to keep it locked

@genod7045 7 ай бұрын

You’re 100 percent right about how brittle those tabs can get, that’s also a great way to remove it if broken

@recruit_life0715 7 ай бұрын

well il be dipped. thats how you do it? sheesh i never would have figured that out

@genod7045 7 ай бұрын

Great minds hermano

@Toeknees_idle 7 ай бұрын

Thanks, good video. giving it a go this weekend

@g_killaass3855 8 ай бұрын

When your daddy leaves you you got KZbin.!❤️👌 shit I would tell my crack head dad to teach me but he useless thank god for KZbin cuz I can’t go to no mechanic shop and have them idiots fuck up or try to over charge me

@glnstercroooz51 8 ай бұрын

Huh.........?🤔🤷 No Comprende

@genod7045 8 ай бұрын

Ay ay ay

@Grump606 8 ай бұрын

Been there and seen that. White on a brand new pickup. Inside info said someone at the factory peed into the pre paint dunk tank.

@genod7045 8 ай бұрын

Very acidic

@allisoncazares9421 8 ай бұрын

Omg I love dude in the background just talking shit the whole time 😂

@luckymayne4304 9 ай бұрын

easy fix lowkey my car was worse n shii

@rprug 9 ай бұрын

Great job and great vid. Thanks

@benekabrown4145 10 ай бұрын

Geno, I want to thank you for your concise instructions. I have NEVER attempted anything with a car but was able to do everything you showed us, and it was exactly what you said to do! Such a proud moment for me! RIH! Dad, I know you were proud of me because had I not seen this video, I would be crying and expecting you to. #FOREVERGRATEFUL

@chrisvidal837 10 ай бұрын

Nice little whack there 😮😂

@genod7045 10 ай бұрын

😂

@jeffc7470 10 ай бұрын

Old head just yapping.

@kimballjacob8191 10 ай бұрын

Hey what’s the size of the bolts or what wrench can I use to take off those one bolts u took off with ur drill? I’m having a hard time taking them off

@genod7045 10 ай бұрын

Either a 12,13,14 or 15mm socket Try all of them by hand first to see which one has the most snug fit.. totally forgot to mention the bolt size

@tenacioustwo281 11 ай бұрын

Son a bitch I love gawd dammit lol it worked for me

@terrells5763 11 ай бұрын

Keep up the good work fam 🙏🏽🙏🏽

@chri93 11 ай бұрын

Grovey tunes 👍

@mikeuyttenhove3212 Жыл бұрын

holy fucking Bondo!

@genod7045 Жыл бұрын

Use a less as possible, the metal should be worked as much as possible first

@LightSpirit24 Жыл бұрын

After watching this, I understand why this video has so few thumbs up. Over 4k views and only 24 thumps up. Wasted my time and no explanation of what he is doing

@genod7045 Жыл бұрын

2005 Honda Accord rear brake pad replacement is in title, I’ll definitely make sure to breakdown the process more

@rprug 9 ай бұрын

He did an excellent job of changing out the break pads. Just pay attention to what he is doing. Watch a couple of times before you attempt to do it. Great job Geno

@LightSpirit24 9 ай бұрын

I changed my rear brake pads easy enough. No special tools needed, just a large screw driver or pry bar for twisting the brake caliper pistons. You push and twist at the same time to get the pistons to recede into the calibers. I used silicone spray on the boots on the calipers to insure they didn't get twisted when receding the caliper pistons.

@genod7045 9 ай бұрын

@@LightSpirit24 you didn’t use a specialty tool? What do you bench?.. real strong guy 💪

@LightSpirit24 9 ай бұрын

@@genod7045 no special tools were needed.

@charlesbellino4359 Жыл бұрын

Man I feel sorry for you dude you was doing that job and it seem like you was in a non safe Zone with all the sirens

@richardfabrizio8998 Жыл бұрын

You sir are no mechanic

@genod7045 Жыл бұрын

😤

@timmcgrath6496 Жыл бұрын

Three things you always replace in pairs, tires, windshield wipers, and headlight bulbs

@genod7045 Жыл бұрын

Great Rule of Thumb

@waldenanthony Жыл бұрын

Appreciate the video

@genod7045 Жыл бұрын

Thank You!!

@fisherprice747 Жыл бұрын

Nice video, these bulbs 9012 that are high and low beam? I have a 2015 aswell, have LEDs in there now but with the white light it’s almost impossible to see in fog and snow. Looking to go to a “yellowish” bright halogen. Thanks

Ең жақсы KZbin

Пікірлер