Sure, would be in the $300+ range, just email us at [email protected]
@Uncoded2K10Ай бұрын
Just done the left side of my AGV K1S in 1 piece, it took me like 5 hours 😭, will use the second piece to do the other half next week, so I’ll just have a seam along the Center of the helmet, never again
@MotoVeeOfficialАй бұрын
How much can you expect to pay for one of these?
@bikeskinzАй бұрын
$200 range
@ScrollinForATrollin2 ай бұрын
I really appreciate you taking the time to make this video, I'm going to try to wrap my bike and helmet here soon
@ScrollinForATrollin2 ай бұрын
Any recommendations for making that seam line not visible down the center of the helmet? could you do more overlapping while cutting in the shape of the camo to make the camo seam continuous?
@johnlancaster85583 ай бұрын
What about making a wood frame, attached the entire wrap across it then simple lower the frame over the helmet heating as you lower the frame?
@bikeskinz3 ай бұрын
That wouldnt work, you get too much excess on the sides, plus it makes it impossible to get the side graphics placement to be accurate.
@DoubleOTEN4 ай бұрын
OUT FKN STANDING!!!! SHOW ME UR WAR FACE !!!!
@vincentwebster83134 ай бұрын
ive had great luck with your kits. I just did a helmet. I made a jig for my vise it is priceless simple 2x4 wrapped in bath towels. take your time this should take 3 hours!
@bikeskinz4 ай бұрын
Thanks so much! glad you liked it
@vincentwebster83134 ай бұрын
I just finished mine! took about 2 hours the kit was perfect and take your time no issues. I did a HD modular helmet. the knifeless tape is a pain in the ass
@bikeskinz4 ай бұрын
thanks
@UP14GHAZIABADRIDERАй бұрын
7
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@lucidworx5 ай бұрын
How much do you charge to wrap a helmet?
@bikeskinz5 ай бұрын
It really depends on a lot of factors, email me at [email protected] and we can go over the options.
@TamaraParrisehs7 ай бұрын
In Canada we have to show the DOT logo so guessing use finishing tape to cut out?
Hey dude nice work. Bout how much did you charge for this or what does it cost to get done usually?
@bikeskinz7 ай бұрын
This one was slightly different regarding quoting because the customer also ordered a full wrap for their bike in this theme. But it's normally in the $200 range for a custom design if we ship the wrap to you.
@Beenhereawhile10017 ай бұрын
@@bikeskinz not bad at all and looks sweet! Thank you!
@bikeskinz7 ай бұрын
@@Beenhereawhile1001 My pleasure, let us know if you need anything. email us at [email protected]
@TripsCloudsPureBliss8 ай бұрын
I wish you spent more than 3 seconds on the reveal
@bikeskinz8 ай бұрын
I know, I did more reveal on the full metal jacket one.
@MustangData9 ай бұрын
And I have the same helmet. Couldn’t have asked for a better how to vid!!!
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@TheDWill149 ай бұрын
Great video🤙🏾
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@eurynomos27639 ай бұрын
Słabo wygląda klejone w 3 części
@freddieparrydrums9 ай бұрын
Amazing video man!! Really helpful 👌
@bikeskinz9 ай бұрын
Thanks Freddie
@melanamelana403910 ай бұрын
Too much talk,why not just do you job
@bikeskinz10 ай бұрын
U do U
@I2X29 ай бұрын
@@bikeskinzgreat job man. It’s the first video I’ve seen on how to vinyl wrap and it gives me a good understanding the basics and items I need. Thanks !
@I2X29 ай бұрын
@melanamelana If he doesn’t talk then how is he suppose to describe what he’s doing?
@Nifty-xd6yc7 ай бұрын
@@I2X2 With Jedi mind powers duhhh
@cdl666110 ай бұрын
Hi. Is possible to apply an clear layer to keep it longer?
@bikeskinz10 ай бұрын
Sure, they make a clear bra type material for that, we don't carry it though. I'm sure you can find it on Amazon though.
@cdl666110 ай бұрын
@@bikeskinz Thanks for answer. Is the same that in the paint? With acrylic clear?
@bikeskinz10 ай бұрын
not sure what you're asking@@cdl6661
@gerardoantonio900111 ай бұрын
Those cuts on video looks ok, but in person looks horrible
@pdiddy-te6mb11 ай бұрын
I've seen it in person, it doesn't look like a factory Icon helmet or anything like that, but it definitely looks professional up close. It gets a lot of attention in traffic.
@andyyougoonie11 ай бұрын
Bro this is Sick!
@bikeskinz11 ай бұрын
Thank you!
@andyyougoonie11 ай бұрын
@@bikeskinz I'm looking to turn my Exo-r1 air into full glow in the dark wrap lol
@bikeskinz11 ай бұрын
@@andyyougoonie Alright, cool. We don't carry any of that type material though.
@ReverendCleeTorris11 ай бұрын
These videos are very niche but it’s exactly what I’ve been looking for. Thank you 🙏🏾
@bikeskinz11 ай бұрын
Thanks, I try. I'm probably going to be doing more video specifically on photoshop and design concepts soon.
@LS-sv7bo11 ай бұрын
love it
@bikeskinz11 ай бұрын
Thank you!
@Cloud8768911 ай бұрын
Nice!😊
@bikeskinz11 ай бұрын
Thanks Cloud! you tha man!
@grahammuir323311 ай бұрын
Hi, Excellent video. Do you use 3Mwrap vinyl?
@bikeskinz11 ай бұрын
We have used both 3M and Avery, and now most shops are more comfortable with the latest gen of Avery due to it's performance.
@UKPrintCo Жыл бұрын
There's still so much white showing at the edges of the wrap! If I was a customer I wouldn't be happy with that at all. It's good to see the process, but the finish seems subpar.
@bikeskinz Жыл бұрын
Do you mean at the hinge? We recommend customers to wrap a black helmet usually, unless there's a lot of white in the design. That way around trim pieces the edges will look better. There's obviously no way to remove rivets or comms from a helmet like this so it's always a challenge. Glad you enjoyed the video sir.
@mochamilla Жыл бұрын
How’s the longevity of the wrap? Does it start to pull away around edges and curves? Plan on protecting my Pista GP RR but everyone is saying not to wrap it because of said issues.
@bikeskinz Жыл бұрын
Well there's different wrap materials out there, 3M and Avery do pretty well if you use Adhesive Promotor.
@fuelon Жыл бұрын
Nice work - I had no idea these were so time consuming. Getting ready to do a wrap myself, so thank you for the detailed process and tips
@bikeskinz Жыл бұрын
You are so welcome! we're probably going to be posting another one this week, so make sure and subscribe.
Hey brother, I love your video you really explained it well and easy, my question is where did you order that vinyl special for the helmet and are there options where you can put your own image? Thank you
@bikeskinz Жыл бұрын
Our site is bikeskinz.com, so we produced it in-house. Reach out to us, we can basically create anything custom!
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@firenlce Жыл бұрын
How long did this take in real time?
@bikeskinz Жыл бұрын
In real-time, probably around an hour, maybe slightly less if you know what you're doing.
@pepino1256 Жыл бұрын
How much are the kits?
@bikeskinz Жыл бұрын
We normally create custom wraps for helmets in the $300 range.
@tikkabrno Жыл бұрын
100th 👍 Planning to do a full wrap. Thanks for the detailed vid.
@bikeskinz Жыл бұрын
Glad it was helpful! yeah you mean a full kit from our site bikeskinz.com right? Let us know if you have any questions
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@caesarromo7760 Жыл бұрын
Where did you get the design from
@bikeskinz Жыл бұрын
This is our youtube channel for our site www.bikeskinz.com, we produce helmet wraps as a custom order item only, so just reach out.
@jmcfadden002 Жыл бұрын
What would a job like that cost?
@bikeskinz Жыл бұрын
We normally do custom helmet wraps in the $300 range, and charge around $100 to install.
@pmg1180 Жыл бұрын
Where do you get those helmet template? Because I’m looking for one where I can test and play with vinyl instead of wrap. I don’t know if both of them make any difference depends on the design or whole helmet? I’m so curious where to find template that I could try and practice with it for fun. Do you have video or how to undo or remove the wrap? If you get bored with it.
@bikeskinz Жыл бұрын
We are bikeskinz.com and we create helmet wraps as a custom item. We don't give out or sell templates though. Reach out and we can price you special test pieces if you like [email protected] Also we don't have a video on removing a wrap, but you basically peel it off, and then if there's a little adhesive you can use a product like Goo Be Gone or Goof Off. Walmart and Autozone sells it.
@UP14GHAZIABADRIDERАй бұрын
kzbin.infoXcrkhbbzh88?si=joxQNQV6bvaC-bo5
@GuilhermeVeiga Жыл бұрын
Great tips. Thx
@bikeskinz Жыл бұрын
Glad it was helpful!
@cynthiareadinger72814 жыл бұрын
I know it's been 7 yrs but do you remember what the name/style is called I this wrap? Living the purple design.
@bikeskinz4 жыл бұрын
That wrap is the Storm wrap, its on our facebook and is a custom order
@chadlinkhart7554 жыл бұрын
Can you take the factory handlebars and put on clip-ons with risers built into them like these
@bikeskinz4 жыл бұрын
I guess
@dubbsp5 жыл бұрын
looks like my bowling ball
@bikeskinz4 жыл бұрын
then you have pretty balls
@cuzo5855 жыл бұрын
That memory cast from avery is a great product. I'm a professional installer in the n.y. area and we prefer avery over 3m
@bikeskinz4 жыл бұрын
We by default print on Avery now, I agree it stays down in the recesses better
@albanolika2385 жыл бұрын
Where can I buy a torch like that?👍🏼
@bikeskinz4 жыл бұрын
We now recommend a heat gun, the one I use now is a variable temp Bauer from Harbor Freight, about $25
@1ofhis5186 жыл бұрын
good job fella
@bikeskinz4 жыл бұрын
Thanks!
@josefigueroa91816 жыл бұрын
I going to do to my bike myself
@bikeskinz4 жыл бұрын
Very doable, just take your time
@azizie_mansor66416 жыл бұрын
what call name green sticker?
@bikeskinz4 жыл бұрын
beats me
@andreabuer70036 жыл бұрын
Did you apply the primer 94 to the entire area where the wrap is applied or just to the underside edges?
@bikeskinz4 жыл бұрын
Just edges and recess areas.
@fubarmofo69696 жыл бұрын
No sound
@bikeskinz4 жыл бұрын
do what ?
@scorpioj6006 жыл бұрын
Thanks
@bikeskinz4 жыл бұрын
No problem
@StoryMotoADV6 жыл бұрын
Awesome video. Found your video after two day of just about giving up! We followed it step by step and my bike turned out perfect. We wrapped the tank and the front and side fairing of my Versys X300 in matte black vinyl. Thanks again!
@bikeskinz4 жыл бұрын
good deal
@PTerracina5 ай бұрын
I was about to leave a very similar comment, but decided I’d read a few comments first and yours was the first one. I’ve been trying to wrap a Vespa scooter and nearly gave up last night. But I’m so glad I saw this video & love your thorough explanation of each little aspect of the process! I’ve watched so many other vinyl wrapping how-to videos, but haven’t found a motorcycle/scooter video as thorough as yours. Thank you!
@patricklowe49706 жыл бұрын
Dude... is there ANY gas in the tank...fumes...open flame...r u ok.?
@bikeskinz4 жыл бұрын
I think so
@Dan6366 жыл бұрын
About to rap my shit took some tips my man thanks team kawi👍☺