Do you need to use the spaces or can you mount it without them?

This helped get me started, but I figured out an easier way to remove the wick. Just flip the whole wick holder, and pull out the internal sleeve, and then just pull the wick out.

Thank you...better video,great job. My stub shaft just popped out after getting my diff level checked. I was able to pry it back in but I will replace now that you showed and shared.. I have passenger side issues no more leak slight vibration, will replace when it acts up again! I have 06 armada

My stub shaft ironically popped out after having my diff oil checked. I pryed it back in and hasn't leaked since. So is it ok or that's the way it locks in? Does a snap ring hold it in or something?

Great video. Autozone doesn't carry the 2.5 id to 2.75 id pipe, but i found one on ebay that's polished. What tool did you use to cut the pipe? Hacksaw, sawzaw, or your cutting wheel tool? Thank you for posting. I watched both ads to support your channel.

Nice video! Great review

😂😂😂 sound jus like me bra thanks man

Where did you purchase the spring purch's

I kept putting mine back together and it would not crank the wick up, then I watched you say to crank it up before I put the wing nuts on. That did it, I had to lift it off alittleand just hold it on while I pushed it down to the wing nut bolts. I had towork mine a few times to get it to work right though. Thanks man.

Did it idle high constantly if just off and on?

Wasn’t going to leave a comment, had too thank you for the video. Picked one of these fans cheap, from someone how bought the wrong one. Great video and appreciate you making it, thanks!

Super 🚜 💪 👍 🤝. Homemade kzbin.info/www/bejne/jWSXY4RthMSGpdUsi=2MLNg0kWMNlow7vT

Thx very helpful video because everyone was leaving one important step out and that winding up the wick before you lock it down with the wing nuts. Because you won’t be able to bring the wick up if you don’t do that step. Thx again for not leaving that very important detail out. Five stars ⭐️

Wow so simple thank you

Learn something new everyday! I am surprised more people don’t mention this in other videos

Thanks bub

My 07 pathfinder armada won't do anything when I shift into drive. Reverse works fine. Would this module have anything to do with that?

Good job, brilliant man

Great explanation of the mounting opuions

Still holding up? How many miles on the new manifold?

Thank you.

The reason for showing a video is to teach the process, you didn't teach a shit

Thanks

My thing is really loose for some reason and when I turn it to zero I swear nothing happens lol

Love the video you are a natural! BTW you forgot about the hi beam! Double click the on and off to see the difference just be careful it can get hot. I just bought one for my Extar EP9 PCC so for the price you cant beat it!. It may be a bit different in looks but it works well with the same features and benefits the 100+ dollar lights have plus you don't have to deal with a wire and separate switch taking up space. The test will be how long the charge lasts in use and stored away. We also need to see if it can take a pounding and moisture.

That was exactly my problem. Thank you!

So you canselled the stock one or you just add it to the stock one ?

I have to change my fuel filter on a 2005 honda shadow sabre vt1100c2 and was wondering fuel filter location of if u have the full un edited version could u send it to me

Should I do that on a 2015 Armada? They says they fixed the issue on that modeal year but I am not 100% confident about that.

I got the light/laser version of this and I'm very happy with it. Thanks for sharing. I got tired of messing with wire management but was looking for a light that would be effective out to at least 100 yards. For that reason I thought I'd give this a try and I'm glad I did.

I have one it sights on amazing. I changed the mount to vortex mount, I just wish it had a quick zome lever! Like the sig tango has! Anyway it can be done with this lpvo?

Thanks for making this video!

So its a rebranded tarter unit? Well guess ill buy direct from tarter then lol

First time with one of these heaters, so should I turn this on each season and leave it on just adjust the temperature or do I need to turn on/off for every use.

I have a LV 4010 also! Very capable little tractor. Your maintenance video helped me get the filters I needed too. Thanks bro god bless!

What size was that bracket? I clicked on the link and it showed me too many items.

I wonder if perhaps insulation on the back of the rops bar would be a little more streamlined?

Did this work? Just had my trans rebuilt everything even tcm. Not related but I want to protect it

Thanks a lot! Working on a 2011 Nissan Patrol 5.6. Exactly the same, identical to this one.

If I'm not mistaken, these trucks are rated for 4 ply Passenger load tires. The XT's are exclusively 10-ply tires, which have a different range of load entirely. For instance my tundra is rated for 29psi front 32psi rear on a "P"265/65r17. running "LT"285/70r17 they need to be inflated up to about 36front 38 rear psi for a similar load range. 10 plys are naturally stiffer tires and are meant for heavy towing and off roading. I still only Inflate them to 35psi all the way around for convenience, but even still get decent wear. Firmer ride throughout, but better performance. 🤙 Passenger rated tires will max out at 44psi or 51psi depending. 10ply LT's have a max of 80psi but the way they carry and disperse load is vastly different than a standard load tire. Id recommend googling tire pressure calculator so you can do an accurate calculation of what pressures to run on your rig. Save you some pennies in the long term.

You must thinking about me stupid bitcoin GG ass punk

wow...! amazing!

Love the informative videos brother 👍🏻

I have the same tractor, I was also surprised how easy that was. I now have the 60” blower mounted on the front for those northeast winters. Great machine!

2005 Nissan y no blowing hot

You didn't show us the bending/reshaping. I would be worried about kinking the hanger when bending it. Did you do anything to prevent kinking?

Love your videos, my guy. Doing some brush clearing on my 4 acre property and always like to see different methods.

Nice Video Brother i am going to get one for my PSA AR15 pistol, very nice I like this light

Not 100% sure this will fix my problem but I think it will. Either way thank you for making this video !

Got it thank you. I couldn't figure out why the pilot kept going out. Got that one done. Did the second and after it was all good went out. Did it again now it's all 🔥 thanks again for this vid