Thanks a lot I couldn't understand how to use this watch at all.
@SarahNWA4 күн бұрын
Williams Larry Brown Lisa Jones Ruth
@jameslesterbaldwin98414 күн бұрын
Sorry, I don’t understand your comment. Maybe it’s a generational thing (I am 81 years old). 🙏🏻😊
@jimsnyder17456 күн бұрын
How do you remove the power meter mode on an elite.? Thanks
@jimsnyder17457 күн бұрын
How do you remove the power meter mode?
@jameslesterbaldwin98416 күн бұрын
Press the back button until the advanced set up appears. It will first ask you if you want to pair your sensors and you press “all” and let the computer search for sensors. It will only pair the sensors that you have. If you don’t have a power or a heart rate sensor, they will not be added to the computer. It then ask you to set up your lights. After you set up the lights, it will ask you to go through and set up the screen options that you want. When it asks you if you want to display power, heart rate and calories, press the front button to designate “no” and this will remove the power from the screen. I just looked at this video and it goes through this maneuver twice. You might want to review the video again and it should be clear. I don’t have a power or heart rate sensor on my bike so I don’t include them in the sensor set up and I remove them when I do the advanced set up of the screen options. Good luck. Sincerely, Jim.
@jimsnyder17457 күн бұрын
How do you remove the power meter setting?
@jameslesterbaldwin98416 күн бұрын
The advanced set up is a little complicated. This video was the seventh video on this computer that I did. I waited to do the sensors, lights and advanced set up until I could understand how it works. In the second part of the video I returned the computer to its factory settings so that I could reset the primary and advanced settings. If you do this, make sure to write down your wheel size and odometer reading so that you can have the correct data in the renew to set up. Be careful out there. Sincerely, Jim.
@JJ.ANDERSEN.2019 күн бұрын
all you really had to do was gently wiggle the bulb left and right. No need to pry, it will come right off. Ours, too, went out since the house was built in 2004. edit: bulb is 2-pin GX23
@jameslesterbaldwin98418 күн бұрын
When I tried gently wiggling the first bulb it started to come apart from the base so I felt it necessary to change tactics. My neighbor had tried to remove the bulbs but was unsuccessful. He may have weakened the bulb before he asked me to help. Not sure what you mean by the edit. The video clearly states the bulb is a 2-pin Gx23. Thanks for commenting.
@jennifermata43239 күн бұрын
I’ve been converting old home movies and when I rewound one tape the tape snapped. When I took it apart everything fell out. Thanks for this video! I was able to figure out how to put it all back together.
@jameslesterbaldwin98416 күн бұрын
Glad this video was helpful. How are you converting them?
@jennifermata43235 күн бұрын
@@jameslesterbaldwin9841 I bought a VCR from a garage sale and have been using the Roxio Easy VHS to DVD converter. Once they are recorded, you can download as an .mp4
@jbl_bass_family12 күн бұрын
i have 3 pairs of waterproof outdoor christmas lights
@jameslesterbaldwin98419 күн бұрын
Do you have any trouble with them in wet weather? My lights are all indoor/outdoor lights. Here in Oregon we get a lot of rain during the holiday months and even these indoor/outdoor lights require extra protection against the rain. For years I got frustrated when a string somewhere in my array of lights went out. Now they seem to all make it through the winter. When I take the lights down, I leave the waterproofing in place so that I don’t have to do it every year. Thanks for watching my video and making a comment. Sincerely Jim.
@jbl_bass_family9 күн бұрын
@@jameslesterbaldwin9841 Hello Jim. When it comes to rainfall, the lamps have not been affected, they work very well, all the diodes are on, I have them only for the first winter and after the season they are removed because the bushes on which I hang the lamps are cut in spring after winter.
@richardwhite709312 күн бұрын
Thank you very much good sir! Very helpful 😁
@richardzollinger308014 күн бұрын
Thanks the tool use is key!!
@jameslesterbaldwin984113 күн бұрын
Yes. Thanks for watching.
@charlieswett980114 күн бұрын
Very curious...
@jameslesterbaldwin984114 күн бұрын
Hi Charlie, If you don’t have one of these you are missing out. Thanks for watching and commenting 😊.
@charlesrtalford0315 күн бұрын
Thank you so much lost my manual, You helped me set up everything! C.R.III
@richardzollinger308016 күн бұрын
New seat 2024 doesn’t have easy seat removal? Am I missing something?
@jameslesterbaldwin984116 күн бұрын
The new seat is completely different. I am working on an updated video that I will post today. If you subscribe to my channel and press the bell next to the subscribe button you will be notified when it is posted. I bought a new seat and noted this right away. Kohler explains changing the batteries in their online manual but they leave out some important details.
@elizabethmcpherson634419 күн бұрын
Thank you so much!! It wasn't easy, but it worked.
@jameslesterbaldwin984119 күн бұрын
You might want to check out my video on the permanent fix for this problem. Thanks for watching.
@DanielNavarroJr25 күн бұрын
Straight forward & accurate. Great video. Thank you, Sir.
@jameslesterbaldwin984125 күн бұрын
Glad this was helpful.
@akshatdalal201929 күн бұрын
Thanks. Owe you a lot
@jameslesterbaldwin984125 күн бұрын
Glad I could help
@rajivbaronia2820Ай бұрын
Thanks for this video. I have the same GE Monogram oven, and the glass door would not close properly. Your suggestion to loosen the two screws helped quite a bit. However, the door still does not close all the way (there is still about a quarter-inch gap). I have loosened the screws to the maximum, so any further loosening would remove the screws from the hinge. Do you have any suggestions, how to fix it?
@mattshungry1Ай бұрын
Thank you for this information!
@jameslesterbaldwin984125 күн бұрын
My pleasure! I have found that when the tires go below the recommended pressure, the low pressure icon comes on. However, when you reinflate the tires to the proper pressure, the light actually goes out without having to be reset.
@frostylight1232Ай бұрын
I think mine is too stiff, there’s two cubes that are very similar and the first move for me doesn’t work
@jameslesterbaldwin9841Ай бұрын
Can you send me a picture or a short video?
@frostylight1232Ай бұрын
@@jameslesterbaldwin9841 how should I send that to you?
@frostylight1232Ай бұрын
@@jameslesterbaldwin9841it might be a copycat puzzle cause mine was from Holzsammlung
@frostylight1232Ай бұрын
How should I send it?
@guyonyoutubeeАй бұрын
Thank you for solution 😊
@jameslesterbaldwin9841Ай бұрын
You're welcome!
@WeisM3Ай бұрын
Thank you. I lost the user manual months ago and my son was so sad that the watch was not set correctly. I watched your video, fix the watch and my son is so happy.
@jameslesterbaldwin9841Ай бұрын
Awesome 👍🙏🏻
@NorthernNomad93Ай бұрын
I've had to reset my clock more times than I care to admit lol this video is useful everytime. 😂
@ryan_stovall_Ай бұрын
Wow this is exactly what I needed, I bought a tape on eBay & the locking mechanism wasn’t working . I opened it backwards & was at a loss looking through 5 different videos on how to reassemble it. Thank you!
@gavinlagrange6322Ай бұрын
Thankyou James - this really helped me. Gotta practice to get as smooth as you :)
@chrisp7723Ай бұрын
2 minutes to figure out what i couldn’t do for three weeks. thanks
@jameslesterbaldwin9841Ай бұрын
It took me a while to figure it out. Thanks for watching.
@Caryn42Ай бұрын
It’s not working. Have any advice?
@alfredochiavassaАй бұрын
I've cleaned and put some oil but the tape doesn't run or sudenly stops. Also i prove to changed the case but the film doesn't work or the image Is very poor. What can i do?
@jameslesterbaldwin9841Ай бұрын
Sorry, I don’t have any good answers for you. You may have to take the tape to a professional. ☹️
@patrickclune3600Ай бұрын
Yes sir you are 100% right. I wish he’d buy the Skmei 1520 model and explain that one. I just got this watch, regret it already, but I have 10 yrs worth of battery life to get this setup right. So I have till July 10, 2034 to get it right. I’ll probably expire before the battery does. P.O.S.
@jameslesterbaldwin9841Ай бұрын
I couldn’t find a SKMEI 1520 model watch online. Are you sure you have the correct model number?
@rocketroy469Ай бұрын
Thank-you so much. I'm in Vancouver Canada so my longitude is the same I'm guessing..yaay ..cheers
@jameslesterbaldwin9841Ай бұрын
I just had to reset my own. In Portland, we are in the -8 time zone and 124 degree longitude. Thanks for watching.😊
@JimFlynn-c7cАй бұрын
Thanks for the super-easy instructions!
@jameslesterbaldwin9841Ай бұрын
You are welcome. 😊
@JamesBliftsАй бұрын
This was very good information thanks pops
@reciteinthenameofallahwhoc1637Ай бұрын
Very helpful video Thanks man!
@jameslesterbaldwin9841Ай бұрын
Glad it helped! Cool watch.
@aishaaltaf700Ай бұрын
This is so cute
@philsskills2 ай бұрын
A great video and presented very well. Thanks so much. regards, Phil
@jameslesterbaldwin984123 күн бұрын
Glad you liked it!
@1013fly2 ай бұрын
Went through this whole video looking for how to calculate the interval for the tide and he just skipped it 🤦
@rroe57182 ай бұрын
Could you please explain how to set the timer so the night light is on at night. Mine is on during the day at present. Thanks
@jameslesterbaldwin98412 ай бұрын
Press the on/off button and the light will reset/come on and stay on for 10 hours and will come on again the next day at the same time. term any time you press the button the light will reset and stay on for 10 hours. Change the intensity of the light by pressing it more than once.
@rroe57182 ай бұрын
@@jameslesterbaldwin9841 Thank you sir.....appreciate your prompt response
@IbnMalah2 ай бұрын
I have all the settings correct and my moon phase is incorrect how do I adjust it?
@zamorajd2 ай бұрын
My computer doesn’t change from BPM to SPEED on the large numbers automatically. How can I do it?
@rosecaffee17372 ай бұрын
Thank you so much for making this video. It’s such a relief to be able to put the pieces together again 😊
@janewhaley50522 ай бұрын
Seat won t pull off when I lift covers
@carina_flocco972 ай бұрын
Thank u it took us 55 mins to figure this out😂
@turkicfish2 ай бұрын
Where did you get this futon i have a very similar one curious about it
@user-qe7cm4vr5d2 ай бұрын
Thank you so much for this video! You helped my son figure out how to set hi watch, because the included instructions were not accurate. Your video was perfect, and we will now keep his watch and not return it. Thank you for your service!
@deepu_dpu2 ай бұрын
Thanks
@jeffplourde12782 ай бұрын
Thank you for the great video. You helped me get my brand new grill going.
@stevencedeno73172 ай бұрын
Tysm
@jameslesterbaldwin98412 ай бұрын
URW.
@ruleriscool57162 ай бұрын
I cant change it back to the twelve hour clock, I need help
@JP.452 ай бұрын
Do you have any idea why mine doesn't make a beep when toggling alarm or chime on/off?
@Sol-Cutta2 ай бұрын
This guy repaired his cassette beautifully, the best ive seen on these instructionals...a nice pro machine friendly splice. 💪
@Sol-Cutta2 ай бұрын
You dont NEED to splice the spine label COLLECTORS..unscrew the tapes as normal, release lift the tape header protector (he calls it the head cover) then SLOWLY , GENTLY begin to lift the top video cassette sleeve and slowly give a gentle left right motion (zig zag) this will slowly and neatly lift the spine label away from ONE edge of the cassette spine.(That its attached to) Very slowly and gently do this until the ENTIRE half of the sticker lifts up and away from the spine. You will feel the tension of the sticker against the plastic, NEVER force this and dont do it fast. Once it is off the entire front of the cassette will lift away and the bottom half will have half a sticker attached to its bottom section. When you place the top back on ensure you dont knock the sticker til the top is down then gently press down the sticker half left to right.back to front centre to edges..then hold the top of tape turn it over and.replace screws.