This video is from 3 years ago...3 years ago the silicone caulk was $4 and the caulk gun was $3... Today the silicone caulk (100% silicone) is about $8 and a basic caulk gun is $20 or more 😢 However....i found a caulk gun for a buck at a little second hand junk shop in my town and silicone caulk still in the packaging for $2.50 at the other second hand junk shop so don't forget to take a look at those places because I've found all kinds of crafty stuff as well as things to repurpose at those places for cheap :)
@lesszormelo996221 күн бұрын
Terrible, terrible video, my opinion, no hard feelings just constructive criticism to edify. U should watch your entire videos B4 posting them to make sure nothing is wrong with them and u and u dnt have to be a media professional to do this, check the audio and the image and that's it.
@africats22 ай бұрын
When you poured the resin in those, did they come out shiny?
@pagevpetty3 ай бұрын
Corn startch instead of soap
@marcusduffner99533 ай бұрын
Thanks for all information I learned a lot. For your moulding with the plastic mug I would cut from the original plastic mug the bottom off and put the silicon moulding inside. It would hold it perfect together instead of the rubber bands. Let me know if you like my idea.
@cybersis853 ай бұрын
Clear 100% silicone. NOT WHITE
@ElaineChampagne-ik2pr4 ай бұрын
That picture is so beautiful. U r so very talented
@1SelfStarter4 ай бұрын
You probably just saved me a ton of money I couldn't afford to spend; but would have spent anyway because making things is my addiction.
@dorothyjones11294 ай бұрын
Can you use them for polyresin
@tammieelliott57464 ай бұрын
Looking forward to trying this for myself.
@bettybriggs77205 ай бұрын
What are they?
@rosadeboom39615 ай бұрын
You better mix corn starch with silicones. That works well to make a mold.
@lynzee68375 ай бұрын
Cooking spray will help unstick it. It also smooths out the silicone. Just a squirt on your fingers and rub some on your item.
@richardcadoret69565 ай бұрын
Thanks for the tutorial !
@robertfiore82806 ай бұрын
Thw reason you had issues was because the silicone has to be squeezed into the water in a way that all the silicone gets wet It will get too sticky and not cure if you squeeze it on top of itself.
@M.bo_Ali6 ай бұрын
I think that using some oil helps it not stick to the hands, and also some starch is used by some people
@terrijones52996 ай бұрын
How about a heat gun to dry the mold
@terrijones52996 ай бұрын
Very useful video😂❤
@terrijones52996 ай бұрын
Ok i see how to make silicone but how do you make a mold. Something you have already in dip it in the mold
@terrijones52996 ай бұрын
Where are you from i am in Florida.my temp is about 60
@whoandwhatisalice6 ай бұрын
What ever happened to you?
@shuddupeyaface6 ай бұрын
Brilliant!😂 And next - Flower arrangements
@jimreynolds59676 ай бұрын
what is up with the low audio
@deniseschaller51646 ай бұрын
The whole by the handle of the fawn gun you stick to tip in and it will cut the tip off instead of a razor blade.
@ScarsandShadows6 ай бұрын
Very helpful. Already got my supplies. Thanks for sharing your technique.
@carmendoyle97867 ай бұрын
Great video ❤
@salliepuckett617 ай бұрын
What I liked is you showed where things didn’t work just right and then how you adjusted things to fix it.
@ritaprovencher60487 ай бұрын
Awesome! I bought the silicone a while ago, but didn't know how to make it. Thanks!!
@masterbaiter17047 ай бұрын
Hoping this can help me make a key
@dianelefever36087 ай бұрын
The shiniyer it is the better shine on your resin.
@gregorymonacelli22578 ай бұрын
Spent the last 22 minutes trying to read what your left hand says
@carmendoyle97867 ай бұрын
It says HARD LIFE ! But why does it matter
@gregorymonacelli22576 ай бұрын
@@carmendoyle9786 matters to him. He put it on his hands for a message for people to see, so I was curious what it said. Is something wrong with that?
@miabibby2756 ай бұрын
Its hard life.....for sure
@bonniehammond59645 ай бұрын
@@carmendoyle9786g
@lesszormelo996220 күн бұрын
U couldn't figure out for 22 entire minutes of this video that it say: "LIFE" to accompany his other tattoo on his right hand for the famous saying "Hard Life"🤦🏼♀️😮 Well I guess not just HARD LIFE but also HARD READING IN LIFE 😆😉
@gregorymonacelli22578 ай бұрын
Silly putty
@karlalehnhoff60698 ай бұрын
Very laborious…but easy..
@bradcostello12998 ай бұрын
Silicon and Caulk are two different things, not sure why he keeps referring to decorators caulk when using silicone, also he’s pronouncing caulk as cock , the second time he done it I lost interest 😅
@tracykym99723 ай бұрын
In my long life that is the only way i have ever heard it pronounced. Perhaps different places say it differently? I have NEVER heard it pronounced the way its spelled. That honestly sounds strange to me.
@outdoorsandglam8 ай бұрын
There is a circle hole on the top of the caulk gun that when you squeeze the handle, it will nip the tip off. Also, then there is a metal pick in the inside of the caulk gun handle that will puncture the inside of the tube. When you finish your project, just put a nail down the neck of the tip, and it will not dry out! There are little tips that most people don't know!
@KandyKoatedKrafts6 ай бұрын
I was going to leave this exact comment… lol
@julienewell39598 ай бұрын
I'm looking forward to seeing your work with resin & you've given me some great ideas for molds, Thank you 😊
@cherylacampora6709 ай бұрын
very cool!
@peterm.eggers5209 ай бұрын
The caulking gun has a tip cutter in the handle! I see the puncture wire on the side of the caulking gun barrel!
@cheriemac50239 ай бұрын
Hope I can find your video soon thax for showing this I wondered if it would work! TADA!it did !! yeah.......
@vandweleer80049 ай бұрын
so what material would you use to fill that silicone mold you just did ? thank you
@vandweleer80049 ай бұрын
Hey good video, simple and easy to do. I'll be doing for sure! thanks
@jsmxwll9 ай бұрын
if you soap your hands dry first and let it dry, it will help keep your hands clean even if you're a bit short on soap in the water. dawn is also one of the best mold releases for this type of silicone i've found as well.
@craftychrystal791310 ай бұрын
PS: did you know that the hole by the handle is for cutting off the tip? neither did I! And the spike attached to the side is for piercing the inner seal.
@pjelvis2210 ай бұрын
I had no idea I needed a cocking gun for my..
@cynthiakuhn435010 ай бұрын
I need to make a mold for domino stands that are 7in long
@craftychrystal791311 ай бұрын
Try it again with the clear Dap. It reacts differently and has a different smell as it cures. Aslo a little thicker and doesn't come out so soupy.
@user-veronika_grabezheva_vk Жыл бұрын
I restored the broken jar with isopropyl alcohol - everything turned out fine. Small irregularities do not affect the quality😊.) Thanks for the information - the powder is also useful to me for polymer clay👌.)
@user-uj7pm2fk6p Жыл бұрын
It is odd thar they put it in heavy plastic !!!!
@ravinwhyte6175 Жыл бұрын
Can you use caulk with Elmer's glue iridescent and working on how to make a mold out of it any ideas?