Gate Expectations by Inwood (Cymru) Ltd

Пікірлер

@chandupatel8156 2 күн бұрын

Good to know

@robwebb7680 12 күн бұрын

Massive help for a diy doughnut like me, thank you 😀

@user-ej9hi3gm9f 21 күн бұрын

Great instructions. Thank you for all the details.

@shoddyangler1454 Ай бұрын

Thank you 🙏😊🙏

@matthewwray749 Ай бұрын

Great video. What is the bolt for? Is it necessary with all the screws in place?

@GatesExpectations Ай бұрын

Over time screws can work loose whilst the bolt doesn't tend to and can be tightened up if required.

@stevenprince9907 2 ай бұрын

Great video and a great name for your company. Thank you

@jaddison13579 2 ай бұрын

Excellent video. nice work.

@richardcanning1084 2 ай бұрын

Can anyone point me to Part 1? Is it still available? The one where the hinges are installed onto the gate. Thanks

@leonfrancis5205 2 ай бұрын

Brilliant video and some great tips. It's great when you see someone who knows what they are doing and willing to share.

@phyllisrock87 3 ай бұрын

Good tips!

@chrisjohnson3590 4 ай бұрын

It might be 11 years old now but the information and the presentation is miles ahead of its time.

@GatesExpectations 4 ай бұрын

Thank you very much for the comments, hope the video has helped you!

@Mas3ghost 4 ай бұрын

Subbed

@waynehendricks8187 5 ай бұрын

Thank you very much. I appreciate it though 180 pounds is around $200 I think which seems high. Thanks.

@GatesExpectations 4 ай бұрын

The £180 pair are Marine Grade Stainless Steel and are probably the dearest gate hinges you can get! Galv (in the video) and the standard black are a lot more economical.

@waynehendricks8187 5 ай бұрын

I really like your video. Thank you. Would you please tell me where you got the hinges? They look like they would support a 11 foot span gate (both sides).

@GatesExpectations 5 ай бұрын

Thanks! They are cranked band and gudgeon hinges and can be found @ www.woodworkersuk.co.uk/hinges/

@leelunk8235 5 ай бұрын

I SPLIT IT , UNFORTUNATELTY SAW THIS VIDEO AFTER THE FACT BUT IT'S OK, THERE'S A BOLT ON IT

@John..18 5 ай бұрын

Easy way to stop a slack fit in the receiver, is simply to wrap a good few turns of insulation tape round the bolt, till you get a snug fit, if this wears over time, it only takes a few minutes to replace the tape,,

@kd300 5 ай бұрын

Thanks good instructions

@huwphillips5009 6 ай бұрын

A brilliant explanation. Thank you. Hopefully I can hang my new garden as well as you have.

@pure_awareness 7 ай бұрын

So the bottom hinge is is taking all the weight now 🤔

@Ancient_Jake 7 ай бұрын

Great video thanks. Just what i needed.

@dragonfly6908 7 ай бұрын

Can you tell me how to adjust the hinges. I have a double gate with these hinges and they appear to have dropped in the middle and the tops of the gates in the middle are rubbing together. Can they be adjusted.

@GatesExpectations 7 ай бұрын

Hi, the hinges shown are 'cranked band & gudgeon hinges and not really adjustable without either repositioning the hinges or hinge plate. For something adjustable you'd need something like www.woodworkersuk.co.uk/adjustable-hook-band-gate-hinge/

@elderwitch8632 8 ай бұрын

Good information. But those latches are garbage. There's so much play in the handle and they usually break at some point (Some dumb monkey usually pulls to hard or doesnt shut the door properly so it slams against the latch).

@stebebone5896 10 ай бұрын

I always. Watch KZbin to learn new skills your video is top notch

@umarshahkeel4803 11 ай бұрын

Good vid but the person on the other side can put hand over and open it🤔

@absami1 Жыл бұрын

Alignment keeps going out due to weather for this bolt. What’s the permanent solution to this?

@terrythomas790 Жыл бұрын

Now with that upper hinge upside down, to keep someone from lifting it, puts ALL the weight of the gate on just the bottom hinge! I dont think thats a good idea at all. All you had to do is to mark the exposed end of the "pin" of the hinge, and drill a small hole through it, and put a nail , or some sort of pin in that, to keep the gate from being able to lift, and that way , the weight of the gate rests on both hinges.

@GatesExpectations 7 ай бұрын

It's a years old tradition to spin the top hinge pin upside down to avoid the gates being lifted off. No problems in doing so at all.

@ChiversCorp Жыл бұрын

There's lots of videos on this subject. IMHO This is the best - thanks Gate Expectations!

@markmills7640 Жыл бұрын

If worried of drilling through gate just cramp a sacrfishal block of wood on the outside and just drill through into to it with no splitout TADAR

@rickallen9167 5 ай бұрын

Or even forget using any sacr fish blocks 🐠 and go straight for a sacrificial one!😂

@andrewfowler6527 Жыл бұрын

How do you determine how far to fit the hinge on the gate?

@philwade7037 Жыл бұрын

Excellent video - thanks. Love the Dickens pun too...🙂

@hayliewinkler Жыл бұрын

Love those hinges mate. Where do you get them from?

@GatesExpectations 7 ай бұрын

www.woodworkersuk.co.uk/cranked-band-and-gudgeon-hinges/

@janeromnicki6598 Жыл бұрын

I really like the Woodglut plans.

@YuriyKhovansky Жыл бұрын

I did it too. This is what I used Woodglut designs for

@simoncrest5354 Жыл бұрын

this is brilliantly useful. Cheers

@martinharrison1504 Жыл бұрын

Great stuff.. here's a few problems I encounter on the days I get up and decide I fancy fitting a padbolt; 1) 'line the padbolt up visually or use a combination square'. A what? I'll go for the visually option I think, 'works for me.. 2)"predrill" ? Sorry I only speak English what language is that? 3)'If you're fitting bolts'. ??? Jesus screws is a big ask, don't push me. 4)Where can I get a "receiver" about 3 inches wide 'cos my dodgy gate's bound to fall on its hinges somewhat. (Aren't gates supposed to slope inwards towards each other, isn't that how they have 'em these days?) 5) 3.00 in; "it's also worth checking at this stage that the bolt of the padbolt does slide in and out of the receiver easy enough". Oh damn, what did I do wrong?.. 6) I forgot the bit of red tape on the drill bit and the back of the gate's a mess, ahghhhhh... 7)"It can rattle in the wind...it can be quite annoying.." 'Wife says she likes it like that, she can hear when I get home late and sneak in round the back. 8) 'Give the receiver a belt with a hammer'.. sounds good to me. 9)'Chisel out the timber so ytou sink the receiver in..' Do you think I've got all bl**dy day? 10)I'm sure this gate will stand up to a few more screw holes. 11)Where's the caulk? (I don't think it was an expensive gate anyway). 12)I'll stick to changing lightbulbs ;)

@alancraigie7951 Жыл бұрын

Great video, very easy to follow and good tips to make sure the handle works when fitted. 👍👍👍

@neilbright5346 Жыл бұрын

Hi there have some adjustable hinges from you guys. Haven't installed yet but looking at the parts, if I place the eye bolt onto the pin there's a reasonable amount of 'play' I e. Will cause the gate to hang down at an angle. Any way to account for this? I.e. make the pin essentially bit wider or eye narrower, assume paint would just flake off.

@deanbh90 Жыл бұрын

I have the same hinges and came here looking for the exact same answer.

@neilbright5346 Жыл бұрын

@@deanbh90 In the end when I installed them it really wasn't the issue that I expected it would be. I think I installed the top hinge set back (I e. Very slightly away from the gate when closed) but really wasn't necessary and I think any play you may get would be easily fixed by tightening top hinge a bit more.

@MrUnknownUser01 2 жыл бұрын

Is the arch multiple boards or is it one piece of wood that was steam bent? Also what type of wood is this?

@ncooty 2 жыл бұрын

Lovely wood on that beautifully designed gate! I'd suggest installing the carriage bolts the other way (as designed) and capping with acorn nuts, but your way certainly works.