I just rebuilt my 5.3 ground up and replaced the power steering pump with one that has less mileage, but now I only have power steering when I’m on the throttle. Any ideas as to what that would be?
@Jsellers19653 күн бұрын
Low idle or probably a bad pump.
@FFEMTB086 күн бұрын
Pee Wee isn’t talked about in SC… Almost like, out of sight out of mind.
@DaleAkins016 күн бұрын
I was beat with a "switch" till blood ran down my legs. Beat and choked by stepdads. I believe him.
@wadepatton24339 күн бұрын
"naphtha" NAFF-tha (...the T is surrounded by H's.)
@derrickpowell52911 күн бұрын
Amazing video. Was pulling my hair out doing all the normal things , checked fuel filter changed plug replaced ignition coil. This was it the whole time. Started right up thanks so much
@SurrealiamPrime12 күн бұрын
i was just looking up PeeWee Herman stuff no idea how i got here 😅
@WarlockCore12 күн бұрын
very good video, clear video shots of steps, really a great help, 2 thumbs up!
@user-ej6lq2jq6v12 күн бұрын
My yth 18542 does not cut same on 4 l reach under deck and right blade spins around but left blade turns like it's in gear u can turn but tight right u can spin around can u help please
@deborahfrederick155814 күн бұрын
Mine is a Gorgeous orange, but they never get this big!!! ❤❤
@davidcilny813921 күн бұрын
Thank you
@210johnnyd28 күн бұрын
Great video...one exception comment. Bypassing your backup blade shutoff. I use to want to do that to my mower, unfortunately I work in an Emergency room and had a little baby girl that got run over by a mower that was backing up and ran over her leg. Really really bad scene, lost a limb and had to live with it because of that reason. I feel for the family because it was a total accident. No one knew the child was outside. I use to want to do that to my mower but now have to say there is hardly a time that I don't back up on my mower that I don't think about this child. My kids are grown and have no children but you never know. Could be a child, a pet or something. Not worth it.
@mimmochiavello605429 күн бұрын
Funziona bene grazie
@FreemanPennington-je5tnАй бұрын
It's hard to actually sift through all the BS from pee wee gaskins he was a pathological liar and a lot of his stories seem outlandish he wanted to be what's called a power man so a lot of the times he made up or embellished stories to make him sing more evil than he actually is the murders that he was charged for where horrifying enough like murdering a woman and then raping and beating her infant daughter to death with a hatchet
@FreemanPennington-je5tnАй бұрын
I'm from South Carolina so I'm very familiar about the sick an evil scumbag
@mrcleanisinАй бұрын
18:17 to 18:48 sound went off.
@trulyyours2176Ай бұрын
You are tough as nails lol I have a HUGE restoration air purifier and I have gas mask on and I still am having such a hard time with the chemicals I’m breathing in so much so I have to take breaks and then my gas mask is fogging so I can’t see nothing. It’s terrible so wish I could do what you’re doing lol and tough thru it!!! I don’t know HOW you’re doing it tho!!
@trulyyours2176Ай бұрын
Anyone know why I have gone thru three cans and it looks super super splotchy 😭😩 what am I doing wrong? Help someone please
@Jsellers1965Ай бұрын
Spray it on heavy so it stays shiney after the first coat starts to dry. It will help with the splotchy
@sebastianaguinaldo2243Ай бұрын
Someone already did that
@Jsellers1965Ай бұрын
I did it first
@SadieGraceАй бұрын
Very beautiful, pray they can weather the hurricane 🌀 🙏
@lornehampel1330Ай бұрын
shouldn't you release the spindle brakes before testing the spindle? the noise i was hearing sounded like it MIGHT be the brake rubbing on the spindle pulley.
@Jsellers1965Ай бұрын
My spindle broke and was rubbing on the brake
@nancyfahey7518Ай бұрын
I used to eat them but now I'm carnivore.
@cynthiawiggins8349Ай бұрын
Such a beautiful color
@aliciaalvarado2784Ай бұрын
Such a beautiful flower! Was feeling down but this made me smile ❤
@stickymemb9072Ай бұрын
God my window broke only after 3 months of my 99 and im so happy to see this vid. Thank you. This is also my first car so this helps a lot👍
@sophiemacbeauty6994Ай бұрын
My dieffenbachia is growing new shoots, like baby plants coming off the main plant, what you advise on what to do with the baby plants? Do I separate then or just leave them to grow in the same pot?
@AxxheadАй бұрын
I would like to join the chorus of thanks in these comments. You saved me a lot of trouble. My yard is an acre and I’m too old to cut the whole thing with a push mower. Thanks for helping me get my mower working.
@jasonpeters9865Ай бұрын
I'm not a Serial Killer,I'm too much of a dickhead at timez.
@nathanjohnson9969Ай бұрын
Looked everywhere, no one was using tools accessible to me....until this video, thanks a ton!
@joshrogers6780Ай бұрын
I did this and it fixes it for 30 minutes. Anyone else experienced this?
@Jsellers1965Ай бұрын
It is a fix for the gas flow, either you removed to much material or not enough. Also you may have a clog in your carb you need to clean out. You can also buy a new part at the link below.
@PatriciaFink-g9sАй бұрын
This Video Was Right On Point My Friend....Thank You So Much For Sharing....God Bless You.... 💯👍⭐️
@creeksideasmr2 ай бұрын
Did you make the rebuild video?
@swedenpredator2 ай бұрын
three engines and two gearboxes?! I Thouht Ford was bad but Chevy?
@Steven1Cicero2 ай бұрын
Get away from using acetone for thinner for starters It evaporizes too quickly before the paint has time to flow out, Also wash the panel with soap and water and dry thoroughly before shooting paint on it, You would be surprised how much dust is still on the panel after sanding if you don't thoroughly wash it off, Then wipe it down with a tac cloth before painting.
@Jsellers19652 ай бұрын
Thanks! Finally some good advice
@Steven1Cicero2 ай бұрын
@@Jsellers1965 What I thought your problem was from the air pockets that form around the dust specs while you are spraying and popping making it look like your problem was water, Unless you edited yourself washing the panel that was the one thing I noticed was that you only wiped the panel after sanding. Water in your line is a big problem but I think that if you had water in your air lines the fisheyes would have looked bigger than the pin head size pops that you had on your panel. You would need a tank full of water to get that many fisheyes, Spray the gun without paint in it and see if you are getting moisture out of the gun, Spray it towards a piece of cardboard if there is that much moisture in the tank it will show.
@GeneralChangFromDanang2 ай бұрын
My YTH has to crank and crank with the choke on, even on really hot days, before it will finally start. Wouldn't doubt if it's related to this "feature".
@keithgray48912 ай бұрын
Murder birds .. okay……😮
@DudeJayStarr2 ай бұрын
It pops back in easy. There’s a metal jacket that slides over it to keep it retained. This will work but it will pop back out, atleast it did in my case. Your fix with the pipe is the best cheap solution. That’s what I had to do.
@rsn-incognito2 ай бұрын
luv ya bro take care
@Jsellers19652 ай бұрын
Luv ya too Bro,
@jrex91972 ай бұрын
This is my all time favorite Hot Wheels car & yours with the black walls is how mine was but with the black scoop & yours looks amazing 👍👍
@donaldoehlrich88822 ай бұрын
This was a great video. However, I am having a problem reconnecting the steering shaft coupler to the gear box. Do you have any tips?
@basicbutter2 ай бұрын
How long does temu shipping take for you in general?
@Jsellers19652 ай бұрын
1 to 2 weeks, some stuff comes from State side warehouses and the rest I guess from over seas
@basicbutter2 ай бұрын
@@Jsellers1965 I ordered some football jerseys, I'll check back in a bit. Thank you
@basicbutter2 ай бұрын
@@Jsellers1965 Alright ill check back in about a month, i never ordered anything off temu until this point 😂
@rsn-incognito2 ай бұрын
tell us what your buying john...
@Jsellers19652 ай бұрын
Always buying things for the wifey, ya know
@CreativeRedundancy2 ай бұрын
Well at least it’s productive and plentiful. I use clippings for mulch for tomatoes here.
@Jsellers19652 ай бұрын
Very true!
@jessetrauma5562 ай бұрын
Doesn't work at all. Garbage.
@mostlymoparih56822 ай бұрын
Pull the wires off one at a time to see if it quiets down when you pull the wire off. Sounds like a rod bearing is wiped.
@Jsellers19652 ай бұрын
Thats what I was thinking, mechanic says change the motor cause either way it's gonna cost an arm and leg
@mostlymoparih56822 ай бұрын
@@Jsellers1965 I'd tell him one or the other, he can't have em both.