@@tobiasrabelink7733 To be honest, I could not measure its speed, probably it is slow, but it is very strong
@kanrapeechuamark12 күн бұрын
Didn't know this fan model existed, Where did you find it?
@MAV-TESLA12 күн бұрын
@@kanrapeechuamark I bought this fan model from the electronic parts market
@バタフライ_YATOGS22U5G_AoV25 күн бұрын
Delta fan pfr0912xhe is 11000rpm speed be likes linus Sebastian
@Lunar.Fox.26 күн бұрын
Making the head split into two different heads increases read write speeds by 2 times
@moodyrnАй бұрын
Delta is really cool
@antresia.97233 ай бұрын
Where can I get one?
@MAV-TESLA2 ай бұрын
@@antresia.9723 You can buy this model from the market and reputable sites
@ethansammis74293 ай бұрын
These fans are made though and built to sound like a jet engine especially scenes they have a high desible but mostly they are one of a kind 😊😊😊
@johnyb-x9b3 ай бұрын
Could you please measure the the real current? Delta fans' actual current seems to be much less than it is printed on the label.
@MAV-TESLA3 ай бұрын
@@johnyb-x9b Yes, that's right, I measured this before. If I want to say scientifically, there are two types of current in this fan. One is the current in normal mode, when the fan continues to work in normal mode, and the other is the current in emergency mode, when the fan is broken. consumes In normal condition, if the technician writes 5 amperes liberally, it draws approximately 3.5 amperes from the network in a normal state, but if it is under pressure, like the failure of the bearing, it will draw the same 5 amperes from the network.
@robpaultog3 ай бұрын
Good lord..
@antresia.97234 ай бұрын
I need to find that fan.
@coops80394 ай бұрын
0:44 bros mic💀💀💀💀💀💀
@yalmadiable4 ай бұрын
Can I ask you question please about fan?
@MAV-TESLA4 ай бұрын
Yes, I will definitely answer@@yalmadiable
@seanwood54434 ай бұрын
where can u buy his model ive looked everywhere
@MAV-TESLA4 ай бұрын
@@seanwood5443 Honestly, I don't know about the seller's sites. I buy this model myself from the market. I haven't ordered it from any site yet. This model is rare, but it can be found if you enter the code correctly.
@dx000106 ай бұрын
Bro it is good for jet engine😅
@Bijan_Bhandari6 ай бұрын
Which color wire has its positive and negative?
@MAV-TESLA6 ай бұрын
@@Bijan_Bhandari Positive red and orange color Black and negative gray color
@Bijan_Bhandari6 ай бұрын
@@MAV-TESLA u mean connect red+orange color wire into positive terminal of power source And Black+gray color wire into negetive terminal of power source Am i right bro?
@MAV-TESLA6 ай бұрын
@@Bijan_Bhandari Yes that's right
@kanokwanphuawongphat10213 ай бұрын
Does apply to all gfb fans?
@vaishnavhm7426 ай бұрын
Hello there,I have an EBMPAPST 6448 TDHHBR(Rated for 48V 3.3A),I can't seem to figure out how to power it on,It has the following wire colours on it on the 10 pin wire terminations connector,the colours of the wire on the pin are-1)Thick Blue colour 2)Brown colour 3)Gray colour 4)Blue colour 5)Violet/Purple colour(not sure exactly which one) 6)Thick Red colour 7)Green colour 8)Orange colour 9)Black colour 10)Red/Brown colour(not sure exactly but seems to be a mix of red and brown,reddish brown),could you please tell me how to power on the fan in case you do have some idea?
@MAV-TESLA6 ай бұрын
@@vaishnavhm742 Let me say it like this The positive red color of the first fan The positive orange color of the second fan The negative black color of the first fan The negative gray color of the second fan The rest of the colors are speed control or PWM For example, yellow and blue colors for the first fan and purple and green colors for the second fan To set up, you only need to turn black and gray to negative and red and orange to positive
@vaishnavhm7426 ай бұрын
@@MAV-TESLA Thank You so much! It hopefully works.
@tobiasrabelink77337 ай бұрын
they stop direct why do the fans not spin out?????
@MAV-TESLA7 ай бұрын
Yes, this feature is for protection, and it keeps the air cooler thanks to the capacitor inside it
@ronrim34797 ай бұрын
bro where did u find this tell me please
@MAV-TESLA7 ай бұрын
I bought this from the market, not from the website
@ronrim34797 ай бұрын
@@MAV-TESLA oh ok thanks !
@tomas_bartekАй бұрын
What market?
@tomas_bartekАй бұрын
I really want to buy this
@BGTech17 ай бұрын
Do you have a 3d printer
@MAV-TESLA7 ай бұрын
No, I don't have the device
@BGTech17 ай бұрын
This one is quite interesting. It looks like it does sorta use centrifugal compression to increase air velocity though the much smaller second fan stage
@thewindevtech7 ай бұрын
Is that a Fujitsu power supply there? :D
@MAV-TESLA7 ай бұрын
Yes, the power is very good and powerful, maybe I will make a video about it^^ Power MODEL>dps-800gba
@thewindevtech7 ай бұрын
@@MAV-TESLA Ah, i actually have 6 of them. Modded them as PSUs for my AI computers ^~^
@Jeff_FanCollector7 ай бұрын
I still don't understand where you got the fan that is not available on the market, are you actually the fan distributor?
@MAV-TESLA7 ай бұрын
To be honest, this fan was sent to me from the market. Rare and second-hand fans are sent to me a lot, and I will separate the special models and put their videos on my page
@vaishnavhm7427 ай бұрын
Hello,What are you exactly using to power up this beast? Are you using the 2 Power Supplies or the Lenovo Adapter?? Also if that fan is rated for 48V DC,how are you running it with a 20V Adapter?
@MAV-TESLA7 ай бұрын
Hi, I used seta power to start this fan, 2 computer power and 1 laptop power The power of the computer is 12 volts, two of them can be converted to 24 volts, and a power of the laptop is 20 volts and it can be combined to 44 volts, and this is enough to start this fan.
@vaishnavhm7427 ай бұрын
@@MAV-TESLA Oh okay,what is the maximum rated current for that fan?Also where do you buy one of them?
@MAV-TESLA7 ай бұрын
Honestly, I don't have that power now, I use a newer power for video. I got this Fenno model from the market
@kanokwanphuawongphat10217 ай бұрын
21 amps this indicates that the employees are bored
@serk.907 ай бұрын
Здравствуйте подскажите пожалуйста где такой купить - никогда таких не видал ( вбил название с этикетки но в интернете нигде нет такого ) уверен скорее всего я что-то не так сделал . Подскажите пожалуйста
@MAV-TESLA4 ай бұрын
@@serk.90 Очень вероятно, что вы неправильно ввели характеристики, иначе вы сможете найти эту модель на авторитетных сайтах. Возможно, она и редкая, но я сам купил эту модель на рынке
@hungryhungryhummer9 ай бұрын
Sold
@menphis9339 ай бұрын
what the utility have the blue and yellow cables?
@MoeMan2169 ай бұрын
all fun in games until that thing takes a fingy
@anonymus1234_10 ай бұрын
What country are u in
@MAV-TESLA10 ай бұрын
Iran
@anonymus1234_11 ай бұрын
3 blades are rare
@anonymus1234_11 ай бұрын
Pls give me link yo buy
@MAV-TESLA10 ай бұрын
I bought this from the market, not an online store
@anonymus1234_11 ай бұрын
Wtf are the rear blades
@anonymus1234_11 ай бұрын
7800rpm lol
@anonymus1234_11 ай бұрын
24000rpm ☠️
@anonymus1234_11 ай бұрын
20k rpm🤯. I can measure 5 blade fan rpms using my ears no measuring tool needed for me lol
@anonymus1234_11 ай бұрын
Is it actually 20 amps? ☠️
@anonymus1234_11 ай бұрын
Maddest fuck ever 😂
@anonymus1234_11 ай бұрын
No need to buy a fan online for personal cooling u already got a gem which u can use😂
@anonymus1234_11 ай бұрын
Min rpm? And max?
@MAV-TESLA11 ай бұрын
Honestly, I don't know, I don't have the measuring tool
@anonymus1234_11 ай бұрын
Tie a long tape and put a stick it to the centre hub to make rrrrrrrr noise and I'll tell u the rpm
@AhmadYassin-v4r11 ай бұрын
😮 wow
@sydskits596211 ай бұрын
Hi Tesla, can you confirm if this fan has audile bearing noise at low rpms?
@MAV-TESLA11 ай бұрын
I'm sorry, I didn't understand what you meant, can you explain in detail?
@sydskits596211 ай бұрын
I bought this fan almost new, very good condition and I have a PWM controller when I adjust to a low speed there is very high grinding noise, I checked to see if the bearings are bad but they are in pristine condition so I was wondering have you check these fans at low speed and do they produce a high grinding noise.@@MAV-TESLA
@MAV-TESLA11 ай бұрын
@@sydskits5962 In my opinion, there can be no problem because of its very high speed, it produces a lot of noise, although it still produces a lot of noise at low speed. You can use the frequency control to reduce the fan speed to its maximum capacity.
@MAV-TESLA11 ай бұрын
@@sydskits5962 Excuse me, I hope I have conveyed my meaning correctly because I am using a translator and I cannot explain exactly
@sydskits596211 ай бұрын
You explained it perfectly, I did some tests on my own and its definitely the PWM thats producing the grinding noise. @@MAV-TESLA
@ethansammis742911 ай бұрын
That is a very powerful serve fan sound like a turbo fan
@antresia.972311 ай бұрын
I want one.
@antresia.972311 ай бұрын
I need to find more Delta fans. I see Schools throwing out large photo copy machines in the trash. If i see a big one. I'm taking it they,ve powerful Deltas blowers inside big printers
@fancollections Жыл бұрын
I have 2 of them
@cadmarins Жыл бұрын
esse bixo tem PWM no fio azul né ?
@MAV-TESLA Жыл бұрын
sim está certo
@udirt Жыл бұрын
sitting here in a room with a switch (ex4300) with those fans inside and i can't hear the one in your video!!!!
@LaundretteEnthusiast Жыл бұрын
20 A ☠️
@anonymus1234_11 ай бұрын
a damn jet basically
@18436Melissa Жыл бұрын
0:29 My pc after running an extremely high graphic game: