Jason Lee

Пікірлер

@PA96704 Ай бұрын

Going with GoFoil for the simple options like you mentioned. Armstrong too many & price so I skipped it.

@surfdogdude 3 ай бұрын

Awesome! I gotta try this. Fingers crossed!

@surfdogdude 3 ай бұрын

It worked! Thanks!

@charliesutton150 4 ай бұрын

Did it. Worked like a charm. Many thanks for this concise and accurate vid.

@JasonLeeCalifornia 4 ай бұрын

Glad to hear!!! Have fun out there!

@Itsdlu 7 ай бұрын

Can the hole be filled with solarez instea of jb weld?

@JasonLeeCalifornia 7 ай бұрын

I wouldn't recommend it. The weld seems to work the best and is much harder which is why it can be tapped.

@adayinthelife5772 8 ай бұрын

How complicated

@fipsdeluxe4926 10 ай бұрын

I have old FCS1 finplugs and i just drilled new holes on the opposite side with a 4 millimeter drill. It worked out fine and I can tighten the screws again. So no need to buy jb weld or something similar... I don´t know yet if the new holes will pull water but I did the repair job on my riverboard which is pretty destroyed already anyway so I thought its worth a try.

@miguelresendes3749 7 ай бұрын

that can't be watertight

@pictureworksexpress4399 11 ай бұрын

I will never understand why designers would put a spike on the trailing edge of the fusalage? it must improve performance but that spike imposes an unnecessary danger IMO.

@JasonLeeCalifornia 11 ай бұрын

The entire thing is dangerous. Some wings are super to sharp too. I have been able to cut paper with the back of tail wings. Some guys like to sand them down a bit so they aren't as sharp....

@owd200 11 ай бұрын

Superb comparison, thanks. Great info and great camera work.

@JasonLeeCalifornia 11 ай бұрын

Thanks!

@mermaidsista32 Жыл бұрын

Hey I'm thinking of buying this for various subjects but I need to use with my left hand do you know if suitable

@JasonLeeCalifornia Жыл бұрын

Unfortunately, everything is setup for the right hand. It would be a bit awkard but you could possibly mount the camera 180 degrees so it's basically on the left side....

@henryhester1897 Жыл бұрын

Bought a 5.0 2021 today for my first wing to be matched with a 8’ DW barracuda type board. I’m 91k

@Stanton_High Жыл бұрын

Hey I recognize that wing haha

@JasonLeeCalifornia Жыл бұрын

haha!! How's your wing journey treating you? Lopez is firing almost every day!

@Stanton_High Жыл бұрын

@@JasonLeeCalifornia just stood up for the first time on foil out at Morro rock paddling in. Was INCREDIBLE. OTW to Lopez now.

@jbwiden Жыл бұрын

Have you done any downwingers with the board? Interested in it for light wind ability with higher aspect foils, though worried might be giving up ease of pumping with wing luffed, any other downsides?

@JasonLeeCalifornia Жыл бұрын

Hello! This season I have strictly focused on downwind SUP foil but the bullet would be my number one choice for downwingers. Hopefully we get some wind again and I can take it out!

@jbwiden Жыл бұрын

@@JasonLeeCalifornia It looks like it has a bit of volume up front. Do you think it gives up ease of foil pumping?

@robertramji761 Жыл бұрын

Thank you!!

@b.j.hackney8553 Жыл бұрын

Spectacular creature

@electropsychosis Жыл бұрын

🧡

@nashfernando4440 Жыл бұрын

😥

@akitadakid6326 Жыл бұрын

Good job this needs way more views !!!🔥💯

@JasonLeeCalifornia Жыл бұрын

Haha I wish!! 🙏

@akitadakid6326 Жыл бұрын

Awesome video the camera work and writing was all amazing

@JasonLeeCalifornia Жыл бұрын

Thanks!!

@sikguystg Жыл бұрын

What type of water start do you do when using your Fusion? Are your feet strapped in?

@JasonLeeCalifornia Жыл бұрын

Depends on the wind. If it's light I just straddle it then do a knee start. Then get in the straps and start working the wing. If it's nuking it's super easy to go from knees to standing, the wing practically lifts you up. In the video it's way too choppy for me to go straight in the straps. I needed to plane first then get into the straps.

@Mickfoil1 Жыл бұрын

How do these boards do with armstrong

@JasonLeeCalifornia Жыл бұрын

Amazing! I’ve been using the HA series. Move them closer to the front of the track. I’m really excited to try the new Medium 1000 coming out next month.

@Mickfoil1 Жыл бұрын

@@JasonLeeCalifornia awesome. Have you tried the armstrong fg 99l 5'8 to compare?

@JasonLeeCalifornia Жыл бұрын

@@Mickfoil1 I have not but my friend has both the Naish and Armstrong boards. Most of the time I see him on his Naish Hover.

@rockm0001 Жыл бұрын

Great review!! Thanks.

@bngtegu9894 Жыл бұрын

Koharre nansoeo

@PinchTune Жыл бұрын

Sick SUP backflip attempt!

@JasonLeeCalifornia Жыл бұрын

Thanks! Gotta keep practicing!!

@LUCKYKRW Жыл бұрын

Nice!! I’m looking to get a different SUP board. I ride Armstrong too…What foil are you riding and how many KGs are you? Thanks!!🤙

@JasonLeeCalifornia Жыл бұрын

Thanks! I’m 75Kg My Favorite setup is the HA 1125 60 Fuse HA 195 Tail I really like the Naish Hover 95 and FFB Wingnut 90

@mikecapuano8010 Жыл бұрын

So is the lake too low to foil now? Thanks for the great videos!

@JasonLeeCalifornia Жыл бұрын

It’s pretty low. Some guys are still going but you will definitely be surprised on how low it is compared to this video. If you rig big and can jam upwind on a windy day you can make it close to the dam where there is some room.

@mikecapuano8010 Жыл бұрын

Are there any issues with kelp at Prismo?

@JasonLeeCalifornia Жыл бұрын

A little. You have to watch out for kelp here and there.

@jasonmcginnis4557 Жыл бұрын

DOOOOODE!! Super sick video! Nice job!!

@JasonLeeCalifornia Жыл бұрын

Thanks Jason!!

@craig.encinitas Жыл бұрын

Sick drone intro!

@JasonLeeCalifornia Жыл бұрын

Thanks!!

@justthewingtips Жыл бұрын

Great video! Steve is ripping as always

@seventail 2 жыл бұрын

X1 on bad road?

@JasonLeeCalifornia 2 жыл бұрын

Cloud wheels would help but the Flex would be a better option in my opinion.

@e.k.4553 2 жыл бұрын

I broke two Naish Aluminium masts, once I lost my foil. Then I went to Armstrong and had no issues anymore. They are really solid.

@JasonLeeCalifornia 2 жыл бұрын

Yeah Armstrong is pretty sweet. I'm still riding my Armstrong HA and am really loving them. Been foiling everyday in this heatwave with the 1125 :)

@Tobeon2 2 жыл бұрын

Would you try North, Axis, & Takuma foils as well ?? 😘😍😎

@JasonLeeCalifornia 2 жыл бұрын

Yes I would like to! I hear good things about Takuma and Axis. Tricky thing about riding new foils is that you really get used to the one your on.

@dirtyernie9299 2 жыл бұрын

Exway paying you for this lol?

@JasonLeeCalifornia 2 жыл бұрын

I wish! Maybe they should!

@TURIECFOTO 2 жыл бұрын

lol, beast is trampa, not exway

@JasonLeeCalifornia 2 жыл бұрын

Trampa is a MONSTER. Anything heavier than 30lbs is a beast to me.

@quimlima 2 жыл бұрын

I'm not sure it would work, but instead of using Epoxy, wouldn't be possible to "melt" some white plastic (lets say...pvc bottle caps?) into the fin screw hole and them proceed with the drilling? Or wouldn't it attach to the hole?

@JasonLeeCalifornia Жыл бұрын

It’s possible. Just don’t inhale the fumes of melted PVC! Worst case you can always drill it back out. However, you don’t want risk melting part of the board if the plastic is too hot.

@quimlima Жыл бұрын

@@JasonLeeCalifornia Thanks. I tried some Regular Epoxy (not the naval type, but the one with two-tubes ready to mix) on a future fins box but, for me, it didn't worked. Haven't tried the melted PVC yet. I fixed it by getting a wider screw and carving new threads.

@JasonLeeCalifornia Жыл бұрын

@@quimlima Yeah, that's the easier solution is to size up in threads. JB weld is actually better for this than epoxy. Epoxy probably cracked but glad you are up and riding!

@165cas 2 жыл бұрын

What lake is this at?

@JasonLeeCalifornia Жыл бұрын

Lopez but it doesn’t look like that anymore. Water is too low.

@PhillGraaf 2 жыл бұрын

Hey man, Great Video thank you. You have another camera than I do but… do you have to turn the camera on before you put it into the housing and off when you take it out?? I just received my housing and there is no switch to turn it on or off.

@twbrkfd1733 2 жыл бұрын

Just got this 410 head with a 475b tripod. Disappointment. Is NOT as smooth as you imply. Jumps around when turning the worm gears and sticks in some positions..