Its not often I miss an AI voice but goddamn it that was annoying

ا👍👍🌹

So glad I found this video, my wires got all mixed up and coudnt figure out where they went.

I did the removal as you suggested. But now the shifter can move even with the key not in ignition. Is that a solonoid problem? Is it the round cable that goes from the back of the shifter to the back of the ignition?

Thanks for the video update, well done 🎊 and as others have said God bless you. As for the side pins, and the two screws that should not be removed, in my case the T-40 screws are actually a cam action hardware (similar to Akia furniture hardware) Now I need to disassemble the shifter module to find the broken 😮piece. Thanks again. ❤

Can you show where the tip of the screw driver is inserted

I can’t get cigarette lighter connector off ??

FYI -- I was able to remove the nozzle (passenger side at least) without removing the covering making this much easier.

Very big thank you from Germany. I have make the Change next i have your Video have seen.

Very useful video, thanks a lot for posting!

The new battery needs to be registered.

Thanks for the great content 👍

Thanks to your video it was fixed and with God's help thank you with your help today I unlocked the gearbox in my Mercedes W220 it tends to lock up when the battery is weak so you have to make sure to charge the battery when you don't drive the car much 👍🏾😀👍🏾 👋🏾

Super useful, thanks.

Thank you for taking the time to make this Video.. My rear window is stuck down.. tomorrow using your Video I will fix it..

Excellent summary of fuse locations and parasitic draw testing on w203. ⭐⭐⭐⭐⭐

VERY CLEAR VIDEO....WORKED FIRST TIME.....MANY THANKS

Great video but there is not enough lighting. To dark to see what you are doing clearly.

Mine is a 2008 clk350. It doesn't have that plastic to take off to get to the washer nozzles. Where that plastic piece is, I have metal that dies not remove from there. It seems plastic pieces have to break to get it off.

VERY HELPFUL. THANK YOU !

Mine still says could not confirm. Any ideas?

Thank you. Worked perfectly. I only drive 3000 miles a year, so this has always been a problem.

I blew my meter out doing this, I asked my friend who is a MB tech and he said i should connect the clamp while the negative cable is still attached or it completes the circuit and will blow the meter because the car powers everything back up after it's disconnected. He also said lock the doors first and wait 10 mins for the car to sleep and when checking the fuses you need to engage the locks so the car doesn't think the doors or trunk is open.

My radio was shorted out with an incorrect battery replacement and now doesn’t work do you know if there’s a fuse behind the radio besides the one fuse #62 in the engine bay?

Nice❤

Great explanation! Thanks

Grazie mille ❤

Every time I fullly open my sunroof it makes a ugly noise like a glass breaking noise or something

The best video ever. Professionally done. Thanks a lot.💃💃💃💃💃💃

Thanks you ,awesome

Followed the instructions exactly and I now have an operating air bag system again. Thank youi

very helpful.Straight to it no fluff. Thanks

hi i tried but nothing happened plz help me

Always gives me service not confirmed.. why ?

Thanks for sharing, very useful video 😊

Great help

Thanks a lot 🎉This tutorial was so much needed 🙌

Thanks brother!

Thank you, this really helped me.

Thanks this was so helpful and very different from other videos for older models vs for the newer models

Better than all data

Not to be too critical or anything, but I never lay a tool atop the engine, and I also would not "pound" the oil filter cap wrench onto the cap.

Great video worked perfect

I know this is an old video but what happens if i worked on them without deactivating the system ?

Thanks for the tip 👍

Excellent video

Watched your vid and went to check the auxiliary battery as I have a few anomolies with the electric systems but there isn't a battery fitted to mine! Should I look elsewhere or wasn't the auxiliary fitted to every model w219 (2007)?

Perfect Thankyou

It would be nice if you had zoomed in so we can see the screw. Also after you push and hold then push and hold wait for four seconds it looks like your keeping pressure on the right side button. Is that right?

Thank you! And thanks for keeping the video short and sweet! Great job. Thanks.