Ultrasonic Power Corp

Пікірлер

@keepitonehunnidsoutheast8410 2 ай бұрын

How much does this unit cost?

@djungariangrowler1241 6 ай бұрын

The music disappeared? What it was?

@natpz2703 7 ай бұрын

Hi. This product is available?

@Pew-pew-is-fun Жыл бұрын

That camera is gonna be so clean after that

@ultrasonicpowercorp 11 ай бұрын

Yes, ultrasonics can clean cameras as well!

@Pew-pew-is-fun 11 ай бұрын

I currently have 2. They are great

@davemiller7633 Жыл бұрын

Can this cause pitting or cracking in older brass instruments?

@ultrasonicpowercorp 11 ай бұрын

Yes it can cause pitting or cracking if used improperly.

@davemiller7633 11 ай бұрын

@@ultrasonicpowercorp Thank you. I recently had an older French horn cleaned and a brace had to be resoldered. It seemed like the solder was degraded. Wonder if that was a cause

@JustAnOldMan Жыл бұрын

looked like the only places it was cleaning was inside the tubes to get the years of spit out of it, didn't appear to be cleaning the actual horns outside

@ultrasonicpowercorp Жыл бұрын

Hi Tom, The inside is definitely the most difficult part to clean, which is why ultrasonics are so common in instrument cleaning. The outside is being cleaned as well but might not be as noticeable as many people wipe down instruments.

@innocentbystander6 2 жыл бұрын

Can this technique be used for cleaning copper pans?

@ultrasonicpowercorp 11 ай бұрын

Yes, ultrasonics can be used on copper.

@scoobydoobydoo1one 2 жыл бұрын

Is this in acidic solution?

@ultrasonicpowercorp 2 жыл бұрын

Yes, it is our mild phosphoric acid based solution. It is called 132B. You can find out more information here www.upcorp.com/detergent-and-supplies/.

@AccumbensNucleus 2 жыл бұрын

That gun is definitely not a safe queen😜

@jbklaudt 4 жыл бұрын

How hot do you get the water?

@ultrasonicpowercorp Жыл бұрын

Hi James, It is best to start at a lower temperature and work your way up to not damage the club. 110 °F should be safe for most steel clubs.

@samatdpfdepot3763 4 жыл бұрын

To piggyback off the below question, our cleaning application would be similar - ceramic filter to filter diesel exhaust gases. I know cavitation is effective for soot, BUT does it help break down hardening ash? Basically I'm wondering if this is effective for cleaning Diesel Particulate Filters on tractor trailers.

@ultrasonicpowercorp Жыл бұрын

Hi Sam, DPF filter cleaning using ultrasonics has become a lot more common. If you ever want to send in a filter for a free test cleaning, we have a form on our website. www.upcorp.com/parts-testing/

@William_Van_Landingham_III 5 жыл бұрын

I stayed for the music :D

@joensab 5 жыл бұрын

What is the function of the plastic tubing in the video?

@resistenciaviva1 5 жыл бұрын

To help push the gunk out of the pipes.

@jonathanblekkenhorst3770 6 жыл бұрын

What type of cleaning solution is recommended for a ceramic filter used in a power boiler? (plugged with ash, not grease?)

@mactek6033 7 жыл бұрын

The trumpet came.

@jeromewhelan6723 8 жыл бұрын

Interesting to see the weapon slide being ultrasonically cleaned as a unit without detail stripping. Even though you have ultrasonically bathed the slide in heated water dispersing oil, I would worry about avoiding rust from water remaining in the slide internals. How many slides have you cleaned this way and have you seen a detail strip and check for internal rust ? Thanks for the interesting video.

@faisal-rashid-apollo 8 жыл бұрын

Amazing .... Love the background music.. does anyone know the track please?

@ultrasoniccleaner3625 8 жыл бұрын

What is the frequency for engine parts cleaning ?

@ultrasonicpowercorp 8 жыл бұрын

40kHz

@crystyaz 8 жыл бұрын

Hello ! Please canyou help me with few questions about ultrasonic cleaner? I want know what solutions you use and what temperature and what frequency for cleaning brass instruments? Thank you very much!

@crystyaz 8 жыл бұрын

hello. please can you tell me what solutions use and what temperature use, for cleaning brass instruments? thanks

@chrissperry8835 8 жыл бұрын

+cristian labus 132-B, call us at Ultrasonic Power to obtain 815-235-6020

@stevenbaggett3691 6 жыл бұрын

cristian labus

@WilliamGregory30533 8 жыл бұрын

Great music...

@raymondmartin3339 8 жыл бұрын

I put my trumpet in a tank and played electro music at it. Why isn't it clean?

@tstarmanqaz 8 жыл бұрын

It cleans out the inside and the outside but the vibration of the bubbles, it's so cool.

@AcuraTLMan 8 жыл бұрын

How did you do that??!!!

@ArtsandCook101 9 жыл бұрын

I just brought my trumpet in yesterday to get that done. It hasn't been cleaned in a while. I'm excited to get it back :)

@danielbillotti6489 8 жыл бұрын

Do you know if it cleans the outside too?

@tungsten8290 5 жыл бұрын

It will, but may not remove tarnish on a silver plated horn. If you bring it to a shop for the work, chances are that they will polish it for you after giving it the noisy bath.

@ArnoldsDesign 9 жыл бұрын

Wow, do you carry a line of cleaning chemicals? I have a midsize ultrasonic unit, and would like something that cleans up aluminum like in the video.

@ultrasonicpowercorp 9 жыл бұрын

Arnold's Design We use 815GD, which is an immersion/ultrasonic detergent that is safe for use with ferrous, aluminum, and most soft metals and plastics

@ArnoldsDesign 9 жыл бұрын

Ultrasonic Power Corp Thanks for the recommendation. I will try that.

@ultrasonicpowercorp 9 жыл бұрын

Arnold's Design Awesome! Let us know your results and if you have anymore questions we can help you with.

@moosbrth 10 жыл бұрын

What's the ultrasonic power in watts and frequency?

@anthonyatkins9584 10 жыл бұрын

can you use acetone or brake cleaner in these tanks, and how many dips can I get out of the solution.

@ultrasonicpowercorp 10 жыл бұрын

No you cannot use acetone. If you would like more info, visit us at www.upcorp.com or toll free (800) 575 - 0168. Email: [email protected]

@TheCartographer89 10 жыл бұрын

You guys going to make an Ultrasonic cleaner for humans?

@AWAradiola 10 жыл бұрын

How do you remove "all" of the air from inside the tubes?

@IronitalMemy 11 жыл бұрын

i wanna an aluminum cleaner

@wyattuffelman7846 11 жыл бұрын

awsome

@Ganizebra 11 жыл бұрын

3 years late. but anyone else watching this later needs to know. Its not the skin it will damage it is the bone and marrow. if you need to stick your hand in it just turn the thing off.

@jeriahlara 11 жыл бұрын

The unit wont do anything to your skin. I used to use one at an electronics company and would stick my hands inside all the time cause it felt funny. Kinda feels like its shocking you but not as hard. I only did it when it was empty.

@JamesDHendrickson 11 жыл бұрын

If you mean gasoline, this thing is basically the ultimate carburetor you would end up with a big big BOOM.

@packleader1215 12 жыл бұрын

It's time somebody make a Ultrasonic Bath Tub.

@djony10 12 жыл бұрын

Do you know if this can help me to remove the chrome from my wheels? I can't look at it peeling off and would like to remove it, anything you can help me with?

@XxAmageddonxX 12 жыл бұрын

what is happening here? :O

@HAMILTON994 12 жыл бұрын

Amazing the amount of gunk that ends up on there. Note that most of it comes from the valve casing...

@foreverwood1963 12 жыл бұрын

what kind of cleaner do you recommend, I want to clean small engine carbs

@AcousticBruce 12 жыл бұрын

Can I pay someone to do this to my motorcycle parts?

@nicodemusreptilian 12 жыл бұрын

if it's water. Ultrasonic cleaners don't really do anything to human skin.

@ItsTheSweeney 12 жыл бұрын

Where in Miami, FL can I have my Remington 870 Marine Magnum deep cleaned via ultrasonic bath? Is it safe on all finishes (in may case electroless nickel)?

@Gunnerm1983 12 жыл бұрын

@zloben9000 >>>> yes, and the mix is approx 10% detergent in the bath. Whose gun is next up? LOL

@Gunnerm1983 12 жыл бұрын

@foresakenlion >>>>>> It's pretty much as pretty as the day you bought it from one cleaning cycle!

@jcris785 12 жыл бұрын

Very cool. You can see the gunk breaking up and surfacing from the rotors. That crap is the main culprit of valves losing their compression and causing damage.

@librarymark 5 жыл бұрын

Except for the fact that this is a piston-valve horn.

@WarFreak1970 12 жыл бұрын

Can do that with anything. Happens by accident all the time :p

@AKAtheA 12 жыл бұрын

@xpapidox the affected areas will probably swell up pretty quickly, maybe even some internal burns (hurts like hell)

@zloben9000 12 жыл бұрын

water based detergent ???

Ең жақсы KZbin

Пікірлер